Back
[19:19:22] <rue_shop3> I'm out cutting metal
[19:46:15] <Tom_L> round metal?
[19:47:55] <rue_shop3> there is a project the log sort wants made, none of the guys seem to be helping
[19:48:25] <Tom_L> that tin cnc part you were doing?
[19:48:34] <Tom_L> or al
[19:48:34] <rue_shop3> and 15 other parts
[19:48:52] <Tom_L> 15!?
[19:49:21] <Tom_L> got em all programmed?
[19:49:47] <rue_shop3> its all differentthings to make
[19:50:02] <rue_shop3> anyhow do you think there is a a 19/32 router bit thats got a 1/4" shank??
[19:51:34] <Tom_L> http://www.toolbarn.com/amana-45238.html?utm_source=google&utm_term=&utm_campaign=CPCS+-+Shopping&utm_medium=cpc&utm_content=9hTntHzP_pcrid_90615801974_pkw_PLA_pmt_b_pdv_c_
[19:51:50] <Tom_L> yes they make em
[19:52:04] <rue_shop3> not a bad price either
[19:52:18] <rue_shop3> can I get you to do a reship?
[19:52:34] <Tom_L> i could probably find one locally
[19:52:42] <Tom_L> but i'm broke right now
[19:52:50] <rue_shop3> no 19/32 is like a hens tooth
[19:53:50] <rue_shop3> http://www.ebay.com/itm/8-Pc-Carbide-Tipped-Straight-Router-Bit-Set-1-4-Shank-Case-to-Dado-Rabbet-New-/371744711340
[19:53:51] <rue_shop3> hmmm
[19:54:27] <rue_shop3> $62 for me
[19:54:36] <Tom_L> better go with that for that many bits
[19:54:44] <rue_shop3> mmm
[19:58:58] <rue_shop3> ...
[19:59:12] <rue_shop3> https://www.amazon.com/Grizzly-H5532-Deluxe-Straight-8-Piece/dp/B00012XC3Y/ref=sr_1_28
[20:00:53] <rue_shop3> but its $50 cad
[20:06:20] <rue_shop3> are you set up to buy from amazon?
[20:06:36] <Tom_L> i think so
[20:06:44] <rue_shop3> https://www.amazon.com/Grizzly-H5532-Deluxe-Straight-8-Piece/dp/B00012XC3Y/ref=sr_1_28
[20:06:59] <rue_shop3> if I upfront ya, can you do that one for me?
[20:07:35] <Tom_L> probably
[20:08:25] <rue_shop3> k, if I send you $40? and we catch up with the shipping difference when you find out?
[20:08:42] <Tom_L> do they take paypal?
[20:08:46] <Tom_L> i don't think they do
[20:12:26] <Tom_L> no they don't but i'm linked to them
[20:15:04] <Tom_L> Estimated Delivery Date: Nov. 18 - 23 when you choose Standard Shipping at checkout.
[20:15:45] <rue_shop3> whatever
[20:15:58] <rue_shop3> balls take a long time to roll nomatter how you attack it
[20:16:11] <rue_shop3> you still have an ecommerse mechanism I can shoot you money with?
[20:16:29] <Tom_L> just paypal
[20:16:41] <rue_shop3> k,
[20:16:46] <rue_shop3> 40?
[20:16:57] <Tom_L> or square but i've never tried that over the phone
[20:17:10] <Tom_L> they charge alot for manual entry too
[20:17:33] <rue_shop3> k, paypal?
[20:17:37] <Tom_L> fine
[20:18:14] <Tom_L> tlight9 at cox dot net
[20:20:06] <rue_shop3> hmm, there is no "convert at par" in the currency conversion options, think I can submitt it as a bug?
[20:20:13] <Tom_L> it's there
[20:20:14] <rue_shop3> :)
[20:20:36] <rue_shop3> sent
[20:20:38] <Tom_L> i don't like their new inteface
[20:20:50] <Tom_L> how could i get it before you sent it???
[20:21:42] <rue_shop3> internet has new latency compensation to speed things up
[20:21:48] <rue_shop3> negitive latency
[20:22:00] <Tom_L> order sent
[20:22:17] <Tom_L> 1 fuzzy teddy bear
[20:22:22] <Tom_L> oops!
[20:22:37] <rue_shop3> origionally used by digikey to send orders so they get there just after the customer ordered them, nomatter what the delivery time would take
[20:22:43] <rue_shop3> haha
[20:23:14] <rue_shop3> as long as it was a big teddy I'm sure I could use it
[20:23:38] <rue_shop3> I upgraded the Y axis on my old cnc
[20:23:43] <Tom_L> i'll check your add once i get it
[20:23:48] <Tom_L> i likely still have it
[20:23:49] <rue_shop3> it was 12-24 and its now 5/16-24
[20:24:20] <rue_shop3> if I move it'll be into a cremator
[20:24:33] <rue_shop3> and I dont think they would be into taking my mail
[20:25:46] <Tom_L> ok, the ball is rolling down the hill
[20:26:19] <Tom_L> you want me to use FEDEX overnight right??
[20:26:28] <rue_shop3> ever gone to a store where they know what they are talking about? and its really satisfying to not have to expalin what your asking for?
[20:26:37] <Tom_L> that would cost 3x the product...
[20:26:40] <rue_shop3> no, god no, standard cheap cheap post
[20:26:45] <Tom_L> i know
[20:27:17] <Tom_L> that is getting much harder to find these days no matter what store it is
[20:27:56] <rue_shop3> I went to the fastener shop yesterday, and asked for 1/4-24 5/16-24 or 1/2-24 and he immediatly said the 5/16-24 is what they had
[20:28:10] <Tom_L> i'm gonna use amazon to get a monitor from bestbuy cheaper
[20:28:16] <rue_shop3> this is the place I keep buying the WRONG pitch of m8 theaded rod
[20:28:18] <rue_shop3> they have both
[20:28:20] <Tom_L> they price match and i won't have to wait for shipping
[20:28:21] <The_Jester> hey Rue
[20:28:31] <rue_shop3> there you are
[20:28:42] <rue_shop3> what the hell, rain got internet down?
[20:28:55] <Tom_L> i tried to get it for 99 yesterday but they declined
[20:28:59] <rue_shop3> I got 1.5 cnc machines sitting idle
[20:29:05] <Tom_L> it's a $179 monitor
[20:29:24] <rue_shop3> cool
[20:29:38] <Tom_L> they had an ad for 109 but i missed it by 1 day
[20:29:42] <rue_shop3> The_Jester, got a clamp?
[20:29:46] <Tom_L> i mentioned that also and they declined
[20:29:47] <rue_shop3> and head
[20:30:44] <Tom_L> The_Jester
[20:30:53] <Tom_L> git over there and install that software!
[20:31:27] <rue_shop3> The_Jester, we can put $15/week into fuel ...
[20:32:02] <Tom_L> The_Jester what ver sw do you have?
[20:32:15] <rue_shop3> hes ghosting, his internet dropped
[20:32:21] <Tom_L> mmm
[20:33:04] <Tom_L> i forgot if i need to fill out a claim form for shipping to you..
[20:33:06] <Tom_L> i think i do
[20:35:55] <The_Jester> https://drive.google.com/open?id=0B7PtpEbLy8aldVF5czJibFh3S0U
[20:36:14] <The_Jester> https://drive.google.com/open?id=0B7PtpEbLy8alMFVBMGF0aktIRm8
[20:36:28] <rue_shop3> got it
[20:36:34] <Tom_L> wtf is that?
[20:36:39] <rue_shop3> parts
[20:37:00] <rue_shop3> but thost urls require a password
[20:37:05] <The_Jester> Tom: sw 2012
[20:37:09] <rue_shop3> which I might nknow
[20:37:12] <Tom_L> legit?
[20:37:17] <rue_shop3> haha
[20:37:19] <Tom_L> want 2015?
[20:37:52] <Tom_L> (64bit)
[20:37:58] <rue_shop3> the password dosn't work, dont wanna lock you out
[20:38:04] <rue_shop3> 64 is an issue
[20:38:16] <The_Jester> rue: those should not require a password
[20:38:22] <Tom_L> they don't
[20:40:38] <rue_shop3> wtf
[20:41:06] <rue_shop3> it must be becasue it rememebrs you
[20:41:08] <The_Jester> I have in my jumk collection A asus mobo with what I belive is a amd 64bit cpu
[20:41:17] <Tom_L> i've never been there
[20:41:22] <Tom_L> i got them just fine
[20:41:52] <rue_shop3> <The_Jester>
https://drive.google.com/open?id=0B7PtpEbLy8aldVF5czJibFh3S0U
[20:41:52] <rue_shop3> <The_Jester>
https://drive.google.com/open?id=0B7PtpEbLy8alMFVBMGF0aktIRm8
[20:42:15] <The_Jester> yeas rue: those are public links, everyone in the world except you can acess them
[20:42:34] <rue_shop2> got them
[20:42:49] <rue_shop2> cant on blackie, it remembers your account and wants you to log in to get them
[20:43:08] <The_Jester> wierd
[20:43:24] <Tom_L> what's that for?
[20:43:41] <rue_shop2> a paint handle
[20:44:04] <rue_shop3> if nothng else, the world will be making our design
[20:44:07] <Tom_L> to hold cans?
[20:44:40] <Tom_L> i've got them in production already..
[20:44:46] <rue_shop3> yep, were trying to make them while the guys who want them still do
[20:45:44] <Tom_L> what were they drawn with?
[20:45:46] <rue_shop3> The_Jester, didn't you adjust the hole in the big peice?
[20:46:46] <The_Jester> http://imgur.com/a/VLjO4
[20:47:10] <The_Jester> what do you mean?
[20:47:22] <Tom_L> did you draw those in SW?
[20:47:27] <rue_shop3> nice translucency
[20:47:43] <Tom_L> catia could put them in a scene
[20:47:49] <The_Jester> yeah, did every part in SW
[20:47:52] <Tom_L> make them look like part of the scene
[20:48:20] <rue_shop3> The_Jester, I'll get a set cut this week then
[20:48:24] <rue_shop3> pending disaster
[20:48:51] <The_Jester> what about the hole rue?
[20:50:53] <rue_shop3> it looks long, this is all latest rev? we talked about it, I dont remember what the conclusion was
[20:51:26] <The_Jester> what do you mean it looks 'long'
[20:51:47] <Tom_L> gonna reboot in 32bit... see if i can import those to smartcam
[20:51:56] <rue_shop3> remember how I was mentioning that the real is not tab to tab?
[20:52:26] <The_Jester> no, i have no idea
[20:52:40] <rue_shop3> k, I'll do er up and get back to ya
[20:54:03] <The_Jester> i adjusted the rh side so the master link would fit, adjusted the lh side for clasp mounting
[20:54:28] <rue_shop3> yup, I'm excited
[20:54:43] <rue_shop3> making T nuts for the old cnc, gonna have it do some of the simpler stuff
[20:54:45] <The_Jester> if you have questions about size i'll send you the stl and you can print them first
[20:55:29] <The_Jester> i havent made it "longer"
[20:55:55] <The_Jester> tabs ect are unchanged
[20:57:18] <The_Jester> may be alot more time efficient to use the rapid prototype machines ;-)
[20:57:45] <rue_shop3> k, so hows the appliance thing going?
[20:58:07] <The_Jester> rue i have fixings for a 64bit machine if we need it
[20:58:54] <The_Jester> and a 64bit copy of win 7
[20:58:55] <Tom_L> could get you 2015 and catia if you want
[21:00:18] <rue_shop3> The_Jester, I'll let you drive the windows thing
[21:00:28] <The_Jester> Tom: would be handy. right now my primary desktop is a 3.4 Pentium D with win xp, however i have a lappy with an amd e1 and win 10
[21:00:42] <Tom_L> get rid of 10
[21:00:58] <rue_shop3> going to cut theings, back in a bit
[21:01:19] <Tom_L> some reason smartcam dxf doesn't like those
[21:01:37] <Tom_L> i _could_ go back to the dos version and try
[21:04:08] <The_Jester> i'll keep 10 on it, the laptop is my "everything i own is obsolete" computer. i mostly use it for streaming...lol
[21:05:51] <The_Jester> I dont realluy use it enough to be annoyed with 10, im protest my desktop is on XP. which runs everything ive got just fin. Will eventually be installing 7 on this box.
[21:06:28] <Tom_L> i've got nt4, xp, 7, 8.1 on various pc's
[21:06:56] <Tom_L> 32 & 64bit 7
[21:07:05] <The_Jester> this laptop shipped with 8.1 but upgraded without pemission in the middle of the night.
[21:07:18] <Tom_L> you should have disabled that
[21:07:33] <The_Jester> oh well
[21:08:12] <The_Jester> coulda woulda shoulda
[21:08:15] <Tom_L> you have 7?
[21:08:48] <Tom_L> err no that's 8.1 i have the iso's for
[21:09:07] <Tom_L> installed on a laptop with a thumbdrive
[21:10:35] <The_Jester> i have win7 64 home premuim upgrade edition with case & key from a thift shop. think i paid about $4 for it
[21:11:03] <rue_shop3> back
[21:11:06] <Tom_L> this is 7 pro
[21:11:26] <The_Jester> ah
[21:11:27] <Tom_L> dunno the difference
[21:12:08] <The_Jester> well rue, hows the bit breaking?
[21:13:08] <rue_shop3> nothing to cut!
[21:13:13] <rue_shop3> so its been idle
[21:13:29] <rue_shop3> been thinking on upgrades to the old machine
[21:13:37] <rue_shop3> want to grbl it, kinda
[21:13:45] <rue_shop3> (or linuxcnc, not sure)
[21:14:12] <The_Jester> u have something to cut now anyway
[21:14:31] <rue_shop3> yep, hopefully that gets up a prototype 10% by friday and i can call it in
[21:14:57] <Tom_L> odd
[21:15:05] <Tom_L> dos wouldn't translate that either
[21:15:09] <The_Jester> work has been okay. tired as hell as this was my first week working two jobs, one during the day, one graveyard.
[21:17:22] <Tom_L> http://tom-itx.no-ip.biz:81/~webpage/cnc/practice_drawings/
[21:17:32] <The_Jester> but its okay. i still remeber how to disassemble most machines so the work itself is good. buuddy is paying me $20/hr to start
[21:17:33] <Tom_L> problems i did during my catia class
[21:17:39] <Tom_L> did them in sw and catia both
[21:20:01] <The_Jester> those are some nice parts tom
[21:20:15] <Tom_L> all work problems from class
[21:20:19] <Tom_L> partial list
[21:20:28] <Tom_L> they only had us do like 10
[21:20:37] <Tom_L> i finished those the first week and asked for more
[21:20:52] <Tom_L> wound up doing about 75 or more
[21:21:13] <The_Jester> problem with appliance repair is about 40% of ppl like to hover and stare while your working which pisses me off and gets my axiety going
[21:21:31] <Tom_L> charge 2x to watch
[21:22:43] <The_Jester> $95 for the service call or 190 if you watch, 285 if you help
[21:24:23] <The_Jester> I did a dryer job on frieday and every time i moved i bumped into the lady who was hovering 6" behind me. wanted to stuff her into her washing machine by the time i was done.
[21:24:52] <The_Jester> f'ing quiz master aswell.
[21:25:36] <The_Jester> however i'll take $20 to replace micro switched and control boards all day long
[21:26:31] <The_Jester> rue: i still have to edit the handle and front asm to match the tube
[21:27:17] <rue_shop3> mae another tube today
[21:27:20] <The_Jester> btw rue: bcit this weekend for cfc ticket so..
[21:27:21] <rue_shop3> futzed it up
[21:27:36] <rue_shop3> need a proper size bit
[21:28:14] <rue_shop3> if this dosn't work out, I'm gonna have a lot of extra shop tools and materials
[21:30:00] <The_Jester> there isnt much excuse at this point
[21:32:02] <The_Jester> ive definatly put my share of time into design. we just have to put them together
[21:32:29] <rue_shop3> heh
[21:32:36] <rue_shop3> one at a time frist
[21:32:55] <The_Jester> so long as you can figure out how to slot the pipe
[21:34:21] <The_Jester> why arnt you able to drill and then slot into the hole?
[21:36:10] <rue_shop3> dont need to, just a 1 pass push with the table router
[21:36:15] <rue_shop3> seam finished the jig
[21:36:20] <rue_shop3> sean
[21:37:25] <The_Jester> http://imgur.com/a/BJ5eH
[21:37:35] <The_Jester> for tom ^^
[21:37:40] <Tom_L> did you ever find any cam that works with sw?
[21:38:05] <The_Jester> naw, everything is retarded
[21:38:18] <Tom_L> showoff
[21:38:33] <Tom_L> catia has scenes built you can insert stuff into
[21:38:47] <Tom_L> i didn't do much with em
[21:38:53] <Tom_L> kinda useless to me
[21:41:39] <rue_shop3> at this rate were gonna have to buy bamcam
[21:41:48] <Tom_L> god no
[21:41:53] <Tom_L> use smartcam
[21:41:58] <rue_shop3> oh, smartcam
[21:42:08] <rue_shop3> The_Jester, get smartcam installed on that computer eh?
[21:42:31] <The_Jester_> i have no use for scenes really
[21:43:27] <The_Jester_> really?
[21:43:44] <The_Jester_> looks like im here
[21:44:20] <rue_shop3> :)
[21:44:38] <rue_shop3> that said, zack is here
[21:45:07] <Tom_L> http://tom-itx.no-ip.biz:81/~webpage/cnc/temp/catia_menu.jpg
[21:45:15] <Tom_L> those are some of the modules catia has
[21:45:40] <Tom_L> i've taken part design, sketcher and assembley design so far
[21:45:52] <Tom_L> played with a couple others
[21:48:44] <rue_shop3> hmm on my machine +z is down
[21:48:51] <Tom_L> reverse it
[21:48:54] <Tom_L> that's wrong
[21:49:01] <rue_shop3> the source is 'lost'
[21:49:08] <rue_shop3> its on a hard drive in my freezer
[21:49:14] <rue_shop3> in a bag
[21:49:23] <Tom_L> you should keep more than one backup of things
[21:49:26] <Tom_L> ya know..
[21:49:45] <rue_shop3> its about the only thing that wasn't
[21:50:10] <rue_shop3> I have everything else from the machine, but the source from those programs
[21:50:20] <Tom_L> time to upgrade to linuxcnc anyway...
[21:50:29] <The_Jester_> shoulda dumped it in the cloud
[21:50:47] <rue_shop3> the age of that machine it was dumped into the cloud
[21:51:11] <rue_shop3> now I have to freeze the drive and scrape the data off
[21:51:13] <rue_shop3> if it'll go
[21:51:26] <Tom_L> what does freezing it do?
[21:51:37] <rue_shop3> brings up the magnetics
[21:51:55] <rue_shop3> after, 20? years, the magnets went
[21:52:21] <Tom_L> i finally had a rll drive quit here a couple yrs ago
[21:52:28] <Tom_L> 20mb?
[21:52:38] <rue_shop3> mfm?
[21:52:42] <Tom_L> segate st238 iirc
[21:53:00] <rue_shop3> I lost so much data on those stupid things
[21:53:01] <Tom_L> i'd taken the lid off it a couple times too
[21:53:05] <rue_shop3> hah
[21:53:07] <Tom_L> still worked
[21:53:18] <rue_shop3> just pick up the machine half an inch and drop it right after boot
[21:53:25] <rue_shop3> it'll start spinning
[21:53:38] <Tom_L> yeah i tossed that drive against the wall once
[21:53:41] <Tom_L> still worked
[21:54:11] <rue_shop3> when the bits on disk are as big as a pencil eraser, its hard to fail
[21:54:19] <Tom_L> problem was a cold solder on the power plug i figured out
[21:55:41] <Tom_L> so The_Jester_
[21:55:47] <Tom_L> what are you doing?
[21:56:11] <rue_shop3> dont underestimate the effort sometimes required to just be alive
[21:57:21] <The_Jester_> counting the time till i head out for walking dead / west world
[21:57:30] <Tom_L> the worlds of 2d & 3d cad never meshed all that well
[21:57:43] <Tom_L> wanna install smartcam and try it?
[21:58:03] <The_Jester_> current status: Alive, Idle.
[21:58:26] <The_Jester_> I could try it yeah
[21:58:37] <Tom_L> it's old
[21:58:44] <Tom_L> all you get is wireframe for 3d
[21:58:58] <Tom_L> it will render
[21:59:04] <Tom_L> but it's got cam
[22:03:02] <The_Jester_> so long as it can do cam
[22:05:43] <Tom_L> pm
[22:08:39] * katsmeow mous for a test of the "new" keybd
[22:09:27] <rue_shop3> hi kat
[22:09:33] <rue_shop3> got to use my milling machine today
[22:09:36] <rue_shop3> made slots in metal
[22:09:41] <rue_shop3> only broke one bit
[22:10:00] <katsmeow> now if only i could replace this desk, with one having less stuff on it to reach over
[22:10:17] <katsmeow> it became you mill ?
[22:11:26] <rue_shop3> ?
[22:12:04] <Tom_L> rue_shop3, what did you do with that .rar file?
[22:12:04] <katsmeow> i thought you were repairing it for someone
[22:12:21] <rue_shop3> saved it
[22:12:34] <Tom_L> did you give it to jester?
[22:12:35] <rue_shop3> katsmeow, quite a while ago I bought a milling machine
[22:12:49] <rue_shop3> its not here, its at a buddys place
[22:13:07] <rue_shop3> I dont have room for it
[22:13:09] <katsmeow> you got another into the shop last week, remember, took you off making my spindles for the next year?
[22:13:16] <rue_shop3> thats a cnc machine
[22:13:22] <rue_shop3> much smaller/lighter
[22:13:25] <katsmeow> cnc milling machine?
[22:13:52] <rue_shop3> the one I bought is a hand milling machine
[22:14:02] <rue_shop3> was about $700
[22:14:12] <rue_shop3> the vise is prolly worth $800
[22:15:45] <Tom_L> kurt?
[22:16:14] <rue_shop3> 8" non economy milling vise
[22:16:59] <katsmeow> two pieces of 2x6x6 slabs of steel with thru bolts to grab things between them in various ways?
[22:17:40] <rue_shop3> its a bench mill, they threw in the table for free
[22:17:49] <rue_shop3> there is a large box of bits, all dull
[22:18:02] <rue_shop3> AND there is no collar for 90% of the bits there
[22:18:05] <Tom_L> steel tabletop mill?
[22:19:04] <rue_shop3> its a 7/16 shank
[22:19:07] <rue_shop3> yea
[22:19:18] <rue_shop3> its a REALLY EARLY busybee
[22:19:48] <Tom_L> but you can make something out of it
[22:20:25] <rue_shop3> http://www.hobby-machinist.com/data/attachments/25/25840-c756bd81cd1017b5bec4c5066abe5055.jpg
[22:20:28] <rue_shop3> it might be that one
[22:20:48] <rue_shop3> its more milling machine that drill press
[22:21:04] <Tom_L> i'm kinda gealous
[22:21:09] <rue_shop3> its not worn out either, almost no backlash in it
[22:21:17] <rue_shop3> but it beat to hell
[22:21:17] <Tom_L> at least it's steel
[22:21:25] <rue_shop3> I think it was moved more than used
[22:21:35] <rue_shop3> hopefully one day it'll be in my shop
[22:21:38] <Tom_L> tram it in and check it over
[22:21:43] <rue_shop3> with stepper motors on it
[22:22:02] <rue_shop3> I did some slots in some bedframe today
[22:22:04] <Tom_L> and gecko drives with mesa hardware running linuxcnc :D
[22:22:17] <rue_shop3> I'm gonna make up a collet for all the 7/16 bits that came with it
[22:22:44] <katsmeow> i ran across the box of steppers i got 10+ yrs ago for stuff
[22:23:19] <rue_shop3> I'd like to see the project finished they were for
[22:23:43] <rue_shop3> grbl makes xyz gcode stuff easy
[22:23:46] <katsmeow> yea me too
[22:24:25] <katsmeow> i finally got some green string, so maybe i can make new project for them
[22:24:39] <katsmeow> is green ok?
[22:25:12] <Tom_L> i like green
[22:25:19] <rue_shop3> pink is ok too, the wrong people pulled a nerve at the time
[22:25:40] <rue_shop3> so is red
[22:25:45] <Tom_L> grbl is limited
[22:25:56] <rue_shop3> how so?
[22:26:20] <Tom_L> doesn't have the full gcode set linuxcnc does
[22:26:26] <rue_shop3> I'm fighting the limit of grbl's interpreter vs the step rate of linuxcnc
[22:26:37] <rue_shop3> on a parallel port
[22:26:48] <Tom_L> the steprate can be dealt with
[22:27:01] <rue_shop3> I have a 486 raw stepping motors under dos, I know the step limit
[22:27:23] <rue_shop3> BUT its still on the try list
[22:33:52] <rue_shop3> ....
[22:33:53] <rue_shop3> hahahahahha
[22:33:56] <rue_shop3> ...........
[22:33:59] <rue_shop3> uh
[22:34:09] <rue_shop3> my old machine, the code I wrote....
[22:34:17] <rue_shop3> I can only do lines in 2d
[22:34:52] <rue_shop3> hahaha
[22:34:58] <rue_shop3> yea, its true too
[22:35:20] <rue_shop3> I dont think I knew how to do 3d brensham...
[22:40:20] <rue_shop3> I'm writing a cam for my old machine, it can be a start for the new one
[22:41:15] <rue_shop3> we do need to try smartcam
[22:41:23] <rue_shop3> I want one for linux tho
[22:52:50] <katsmeow> First Ever Hindu Woman Elected into Congress
[22:53:06] <katsmeow> next year : First Ever Hindu Woman with blond hair Elected into Congress
[22:53:18] <rue_shop3> under the rule of the crazy man, amazing!
[22:53:20] <Tom_L> guess he's got connection problems
[22:53:23] <katsmeow> following year : First Ever Hindu Woman with blond hair and green pantsuit Elected into Congress
[22:57:03] <Tom_L> rue_shop3, guess i'll pick up with him another day
[22:57:05] <Tom_L> i'm out.
[22:59:04] <rue_shop3> Tom_L,
[22:59:09] <katsmeow> ...
[22:59:11] <rue_shop3> jester says his internet died
[23:01:07] <Tom_L> rue_shop3
[23:11:59] <Tom_L> rue_shop3
[23:12:28] <katsmeow> rue_shop3
[23:12:56] * Tom_L gives up for the night
[23:34:31] <rue_shop3> katsmeow,
[23:37:21] <katsmeow> rue_shop3,
[23:37:58] <rue_shop3> yes?
[23:38:05] <katsmeow> no?
[23:38:16] <katsmeow> Tom truely *wanted* you
[23:38:22] <rue_shop3> he found me
[23:38:25] <katsmeow> he was calling for you!
[23:38:29] <rue_shop3> all is good 'nuff
[23:38:29] <katsmeow> oh, ok
[23:38:32] <rue_shop3> tahnks
[23:59:01] <katsmeow> rue_shop3,
[23:59:28] <rue_house> yes?
[23:59:47] <katsmeow> still thinking of making 7-seg (or 9 seg, or more) that look like
http://www.s100computers.com/My%20System%20Pages/IDE%20Board/CHS%20Picture.jpg , by using fiber optics as each dot in the image
[23:59:59] <rue_house> aha, thats what I was missing, thurs is make spool for kat
