Back
[09:49:28] <Jymmm> rue_house: I saw a "drizzler" where they were generating syngas, I ponder if feeding the syngas back into the hopper would increase combustion better/faster?
[18:54:07] <katsmeow> http://www.ebay.com/itm/100-Roller-Rolling-Skate-Ball-Bearings-608-ZZ-608Z-Z-2Z-inline-Rollerblade-Blade/401222054786
[18:54:21] <katsmeow> 608 ball bearings 10 cents each free s&h
[18:54:24] <katsmeow> that is all
[19:15:48] <Tom_L> cheep cheep
[19:55:28] <katsmeow> http://s246.photobucket.com/user/fluvannabear/media/EVERLAST%20CUT50D/100_1256Medium.jpg.html
[19:55:31] <katsmeow> NOT MY PICS
[19:55:51] <katsmeow> i count 24 IGBT on the heatsink, maybe more unseen
[19:55:54] <katsmeow> that is all
[20:51:18] <rue_shop3> thats not an image, its a javascript
[21:24:00] <katsmeow> "Ground clamp fell off of wire. Are you ok if i fix it, or is warrantee void?"
[21:24:04] <katsmeow> that is all
[21:34:10] <__M00N__> HAy RUE
[22:11:31] <katsmeow> and that......
[22:23:24] <rue_shop3> ARG GOD DAMNIT
[22:23:47] <katsmeow> I AGREE
[22:23:51] <rue_shop3> I WANT TO WORK ON UPGRADING MY OLD CNC, AND I BOUGHT THE WRONG THREADED ROD AND I CANT FIND A GOD DAMNED CHART OF ROD SIZES FOR THREADING
[22:23:54] <rue_shop3> DAMNIT
[22:24:10] <rue_shop3> I NEED TO MAKE 5/16-24 ROD
[22:24:16] <rue_shop3> ABOUT A FOOT OF IT
[22:24:29] <rue_shop3> AND ARG
[22:24:30] <katsmeow> ALWAYS grab threaded rod anywhere electricians are hanging conduit ALWAYS
[22:24:39] <rue_shop3> no its fine thread
[22:24:52] <rue_shop3> I can only get it from the fastener shop that CLOSED FOR THE NEXT 4 DAYS
[22:24:56] <rue_shop3> FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFf
[22:25:12] <Tom_L> UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
[22:25:18] <katsmeow> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
[22:26:21] <katsmeow> you want -20 anyhow, so one turn = .050 , eaaaaaasier math
[22:26:33] <rue_shop3> no
[22:26:42] <rue_shop3> the machine IS 24, I want 24
[22:26:48] <katsmeow> OK
[22:26:54] <rue_shop3> but I dont want the #10 its got
[22:27:03] <rue_shop3> I want a nice sturdy peice of 5/16
[22:27:14] <rue_shop3> without changing the pitch
[22:27:16] <rue_shop3> ARG
[22:27:43] <katsmeow> got a lathe? becha can make some allthread on it
[22:28:48] <rue_shop3> maybe .285
[22:28:55] <rue_shop3> not over a foot of rod
[22:29:16] <Tom_L> did you even look at that chart?
[22:29:23] * katsmeow poured out 4 bottles of antacid because they changed their formula to aluminum hydroxide, and found some at store that is calcium hydroxide
[22:29:41] <Tom_L> use the 'basic effective diameter' numbe
[22:29:42] <Tom_L> r
[22:30:01] <katsmeow> why not over a foot of it?
[22:32:14] <rue_shop3> I just want a god damned chart that has the different thread sizes and a number or the diameter of rod to use
[22:32:18] <rue_shop3> why is that so hard?
[22:32:38] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:32:39] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:32:39] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:32:40] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:32:41] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:32:41] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:32:42] <Tom_L> http://www.carbidedepot.com/formulas-tap-standard.htm
[22:33:01] <rue_shop3> maybe .285
[22:33:02] <katsmeow> because Tom won;t give us the damned url
[22:33:10] <rue_shop3> aha
[22:33:16] <rue_shop3> its matches
[22:33:28] <Tom_L> use the 'basic effective diameter' number
[22:33:29] <Tom_L> use the 'basic effective diameter' number
[22:33:29] <Tom_L> use the 'basic effective diameter' number
[22:33:30] <Tom_L> use the 'basic effective diameter' number
[22:33:30] <Tom_L> use the 'basic effective diameter' number
[22:33:31] <Tom_L> use the 'basic effective diameter' number
[22:33:51] <rue_shop3> yea it matches what I think I see them turning down to on this bolt
[22:34:01] <Tom_L> yippee!
[22:34:09] <rue_shop3> 7.2mm
[22:34:15] <Tom_L> print that chart and tatoo it to your forehead
[22:34:24] <rue_shop3> no I'm gonna rewrite it
[22:34:33] <rue_shop3> properly label it
[22:34:35] <katsmeow> and carry a mirror so you can see your forehead
[22:41:12] <Jymmm> or butt
[22:41:29] <katsmeow> carrying abutt makes no sense
[22:41:36] <rue_shop3> Size TPI Rod size
[22:41:37] <rue_shop3> 4 40 0.0958
[22:41:37] <rue_shop3> 4 48 0.0985
[22:41:37] <rue_shop3> 5 40 0.1088
[22:41:37] <rue_shop3> 5 44 0.1102
[22:41:37] <rue_shop3> 6 32 0.1177
[22:41:39] <rue_shop3> 6 40 0.1218
[22:41:41] <rue_shop3> 8 32 0.1437
[22:41:43] <rue_shop3> 8 36 0.146
[22:41:45] <rue_shop3> 10 24 0.1629
[22:41:47] <rue_shop3> 10 32 0.1697
[22:41:49] <rue_shop3> 1/4 20 0.2175
[22:41:51] <rue_shop3> 1/4 28 0.2268
[22:41:53] <rue_shop3> 5/16 18 0.2764
[22:41:55] <rue_shop3> 5/16 24 0.2854
[22:41:59] <rue_shop3> 3/8 16 0.3344
[22:42:01] <rue_shop3> 3/8 24 0.3479
[22:42:03] <rue_shop3> 7/16 14 0.3911
[22:42:05] <rue_shop3> 7/16 20 0.405
[22:42:07] <rue_shop3> 1/2 13 0.45
[22:42:09] <rue_shop3> 1/2 20 0.4675
[22:42:11] <rue_shop3> 9/16 12 0.5084
[22:42:13] <rue_shop3> 9/16 18 0.5264
[22:42:15] <rue_shop3> 5/8 11 0.566
[22:42:17] <rue_shop3> 5/8 18 0.5869
[22:42:19] <rue_shop3> 3/4 10 0.665
[22:42:21] <rue_shop3> 3/4 16 0.7094
[22:42:23] <rue_shop3> 7/8 9 0.8028
[22:42:25] <rue_shop3> 7/8 14 0.8286
[22:42:29] <rue_shop3> 1 8 0.9188
[22:42:31] <rue_shop3> 1 14 0.9459
[22:42:33] <rue_shop3> thats all I wanted
[22:42:35] <rue_shop3> no stupid ambigious names, no overlapping information
[22:42:37] <rue_shop3> just the damn chart
[22:42:48] <Tom_L> your chart makes no sense either
[22:43:11] <Tom_L> 7 / 8140 is pretty damn small
[22:43:12] <rue_shop3> if you have a 8-36 thread to make, what size rod do you use?
[22:43:21] <rue_shop3> oh look, its .146"
[22:44:02] <Tom_L> whatever suits your fancy i guess
[22:44:21] <rue_shop3> I just want to know thet damn rod size to use, why am I the only person who can comprehend this
[22:44:33] <rue_shop3> its just like a tap chart, but its for external thread
[22:45:24] * katsmeow comprehended it
[22:46:08] <rue_shop3> now I just need to find some .285 rod!
[22:46:32] <katsmeow> drat, all i got is .286
[22:46:34] * Tom_L gives rue_shop3 a 1" bar and looks over at his lathe
[22:47:38] <Jymmm> I've heard of mini bars, but damn! And should he REALLY have boose while operating a lathe?
[22:48:26] * katsmeow hides the Bose
[22:48:46] * Tom_L turns up the Bose and chugs some booze
[22:50:16] <rue_shop3> .274 didn't work
[22:51:03] <Tom_L> flat threads?
[22:51:18] <rue_shop3> pretty shallow ones
[22:51:50] <rue_shop3> I cant turn down that much bar
[22:52:03] <rue_shop3> I'd need a die
[22:52:08] <rue_shop3> and I dont ahve one
[22:52:14] <rue_shop3> cant think of how to make one up
[22:52:29] <Tom_L> use a nut and slit it with a triangle file
[22:52:35] <rue_shop3> if I were kat, I'd figure out how to set up a grinder on the lathe
[22:52:51] <rue_shop3> I dont ahve a 5/16 fine thread not
[22:53:31] <Tom_L> dude
[22:53:34] <Tom_L> you're screwed
[22:53:34] <katsmeow> does it need to be strong?
[22:54:00] <rue_shop3> its the Y axis feed on my old cnc
[22:54:17] <rue_shop3> right now its a number 8 rod thats flimsy and crookid as all hell
[22:54:26] <rue_shop3> I just wanted to spend the night upgrading that axis
[22:54:42] <rue_shop3> I ahve no ambitions to work on anything else tonight
[22:54:43] <rue_shop3> just that
[22:54:51] <Tom_L> supper
[22:54:53] <Tom_L> sleep
[22:54:54] <rue_shop3> I specifically took time out from work to get thre threaded rod
[22:55:02] <Tom_L> the wrong rod?
[22:55:05] <rue_shop3> and now I cant do anything
[22:55:10] <rue_shop3> yea, I thought it was 6032
[22:55:13] <rue_shop3> 6-32
[22:55:16] <katsmeow> use the leftover #4 rebar from pouring the concrete
[22:55:18] <rue_shop3> so I got 10-32
[22:56:40] <rue_shop3> the ONLY copy of the software for it is on a hard drive in my freezer
[22:56:47] <rue_shop3> (source)
[22:57:01] <rue_shop3> I could try and recover it
[22:57:07] <rue_shop3> I have the usb things now
[22:58:15] <katsmeow> use the leftover #4 rebar from pouring the concrete
[22:58:31] <rue_shop3> cant turn down that long a rod without a die
[22:59:13] <katsmeow> why not?
[22:59:53] <rue_shop3> because its too small
[23:00:44] <katsmeow> what does that haveto do with it?
[23:00:44] <rue_shop3> did you find the hidden image of your peices kat?
[23:00:48] <katsmeow> nope
[23:00:57] <rue_shop3> it bends under the bit in the middle
[23:01:20] <rue_shop3> that too bad, I was sure it'd make ya happy
[23:01:44] <katsmeow> steadyrest on the table
[23:02:21] <katsmeow> couple or 3 bearings, adjust so it's happy
[23:07:03] <rue_shop3> well
[23:07:23] <rue_shop3> option 2.45 was to thread a peice of larger pipe (to reduce mass)
[23:07:28] <katsmeow> https://i.ytimg.com/vi/2MlA4Rps3yk/hqdefault.jpg?custom=true&w=196&h=110&stc=true&jpg444=true&jpgq=90&sp=68&sigh=2igxHxGSKamYFDcy0eYomA9KqIA
[23:08:56] <katsmeow> drat , it's almost 11 and i have left dinner in the nukebox for over an hr again
[23:20:11] <katsmeow> ok, got dinner here
[23:59:51] <rue_shop3> ok I threaded a 16mm pipe
[23:59:56] <rue_shop3> aluminum
