Back
[00:00:00] <rue_shop3> may I make you famous for that?
[00:00:30] * rue_shop3 notes to manipulate the universe later
[00:00:54] <katsmeow> k
[00:02:05] <rue_shop3> more tea need to drink more
[00:02:11] <rue_shop3> eyes are shutting again
[00:02:14] <rue_shop3> damnit
[00:03:16] * katsmeow lost all expectations , so don't try for her projects
[00:04:12] <rue_shop3> !?
[00:04:27] <rue_shop3> I'll get it, do you not want me to finish?
[00:04:37] <rue_shop3> I'z gonna raid the scrap pile tommorow
[00:04:47] <katsmeow> you don't have materials, time, or energy
[00:04:48] <rue_shop3> Its been worked out, nobody owns it
[00:05:04] <rue_shop3> the lot owner is ok for me to take anything from it
[00:05:12] <rue_shop3> at this point its illegal dumping
[00:05:21] <rue_shop3> gonna give 'em $10/mo
[00:05:27] <rue_shop3> take anything I want
[00:05:58] <katsmeow> need anything off outboard boat engines?
[00:06:14] <rue_shop3> aside from a 5hp 2 stroke?
[00:06:22] <rue_shop3> for the mecha?
[00:07:28] <katsmeow> i dunno what i will be getting
[00:07:59] <katsmeow> i want the props and prop shafts, not sure maybe the starters, unsure anything else is worth touching
[00:08:01] <rue_shop3> kat, should I keep working on these? or is your drive for it dead?
[00:08:28] <rue_shop3> I think I can get one done every 2 days
[00:08:52] <rue_shop3> tea
[00:08:53] <katsmeow> may take me months to save up the money to get all 8 adone locally
[00:09:25] <katsmeow> i got a roof to do, that's an immediate $400
[00:09:35] <katsmeow> already spent at least $400
[00:11:45] <katsmeow> damnit'
[00:11:53] <rue_shop3> I can do it
[00:11:59] <rue_shop3> apparently faster
[00:12:05] <katsmeow> yoou can make clocks too
[00:12:07] <rue_shop3> I have to send your digits anyhow
[00:12:26] <rue_shop3> I think they are ready, I didn't check the last coat of paint
[00:12:26] <katsmeow> well, yea, in 6 -18 months
[00:12:30] <rue_shop3> no
[00:12:35] <rue_shop3> give me a week or two
[00:12:42] <rue_shop3> its hard, even for my stuff
[00:12:51] <rue_shop3> its scaring me
[00:12:57] <rue_shop3> cant get nothin done
[00:13:58] <katsmeow> why scaring you ?
[00:27:52] <katsmeow> ...
[00:36:51] <rue_shop3> because I'm sleeping to death
[00:37:04] <rue_shop3> I'm walking around the shop with one eye half open right now
[00:37:09] <rue_shop3> its only 10
[00:37:33] <rue_shop3> I'v been trying, over the last 2-3 months to determine mental vs physical exhaustion
[00:38:21] <katsmeow> it's extremely difficult to guess because no one knows your chronological age
[00:39:05] <rue_shop3> 14000...something... maybe 15000.... I cant remember now
[00:39:15] * katsmeow needs to go laydown for the nite
[00:39:24] <rue_shop3> stay up like me
[00:39:36] <rue_shop3> just, dont operate heavy equiptment
[00:39:41] <katsmeow> it's after midnite, i already stayed up till 10pm like yu
[00:40:16] * katsmeow waves gnites
[00:40:24] * rue_shop3 faceplants
[21:14:54] <rue_house> The_Jester,
[21:15:16] <rue_house> http://ruemohr.org/~ircjunk/images/p1080531.jpg
[21:15:22] <rue_house> http://ruemohr.org/~ircjunk/images/p1080532.jpg
[21:15:28] <rue_house> http://ruemohr.org/~ircjunk/images/p1080533.jpg
[21:39:30] <rue_shop3> Tom_L, ^^
[21:39:53] <Tom_L> i looked
[21:40:46] <rue_shop3> k
[21:41:46] <Tom_L> http://tom-itx.no-ip.biz:81/~webpage/cnc/Cube1.jpg
[22:28:48] <katsmeow> .
[22:30:25] <Tom_L> http://tom-itx.no-ip.biz:81/~webpage/cnc/temp/shaft2.pdf
[22:31:56] <katsmeow> metricated
[22:32:04] <Tom_L> for the canuck
[22:32:18] * katsmeow sighs
[22:33:17] <rue_shop3> whats wrong kat
[22:33:26] <rue_shop3> got it on the lathe now, no running back and forth
[22:33:50] <katsmeow> 8 of them?
[22:34:16] <rue_shop3> you didn't expect them all today did ya?
[22:34:24] <rue_shop3> I had 5 visitors today
[22:34:35] <rue_shop3> one of them dropped off a cnc machine
[22:34:59] <rue_shop3> another brought by a bunch of material for stuff were trying to build (they are, I'm facilitating)
[22:35:48] <katsmeow> i made a path back to a lathe i was cobbling together from scraps, discovered a leak in a gallon jug of 80wt, got half of it soaking into the den floor now :-|
[22:37:54] <rue_shop3> doyou have the set of do-it-yourself encyclopedias?
[22:38:00] <rue_shop3> I only have 3 volumes
[22:38:37] <katsmeow> diy encyclopdias?
[22:38:42] <rue_shop3> yea
[22:38:50] <rue_shop3> circa '75?
[22:38:55] <rue_shop3> maybe '80
[22:38:57] <katsmeow> i have not written a set, no
[22:39:08] <rue_shop3> the red cover ones
[22:39:16] <katsmeow> dunno what that means
[22:39:24] <rue_shop3> I need to eat and take kat-medicine
[22:40:22] <rue_shop3> https://img0.etsystatic.com/070/0/7604627/il_570xN.807561410_4brb.jpg
[22:40:27] <Tom_L> http://tom-itx.no-ip.biz:81/~webpage/cnc/temp/shaft2_inch.pdf
[22:40:28] <Tom_L> for kat
[22:41:46] <katsmeow> looks so simple in inches
[22:42:50] <katsmeow> rue, never seen those
[22:43:27] <rue_shop3> ugh
[22:43:48] <katsmeow> wold they be current?
[22:44:55] <katsmeow> i mean to make a cnc anything, this is the most recent :
http://www.up-board.org/up/ , and it has no vga, no sata/pata , only 28 pins of GPIO, runs only win10, and it's $90
[22:46:56] <rue_house> no I just want a router table
[22:46:59] <rue_house> but I keep forgetitng
[22:47:12] <rue_house> there is a part of me that just has to look at something and knows how to build it
[22:47:27] <rue_house> so, now that I'v browsed images of router tables I have a deign
[22:47:34] <rue_house> just have to build it
[22:48:09] <katsmeow> umm, isn't a router table a table with a removeable top which has a hole in it?
[22:48:24] <rue_house> exactly
[22:48:37] <katsmeow> sounds difficult
[22:51:11] <katsmeow> there useto be a PBS show on using routers, those guys were magicians
[22:51:59] <katsmeow> they could convert a 2x4 into a small work of art and a 3gal bucket of wood chips in seconds
[22:56:19] <katsmeow> they's say "and we'll change this bit out for hti and grab some wood" and there's be a burst of router noise, they's brush a 6" pile of chips to the floor and hold up a finished dohicky
[22:57:01] <katsmeow> if you weren't taping it so you cold slowmo or pause it, you'd never see what happened
[22:57:29] <katsmeow> and then, all tv changed to digital and i have not seen PBS since
[22:59:05] <Tom_L> there are router tables on grabcad
[23:00:45] <Tom_shop> https://grabcad.com/library/cnc-plasma-8
[23:01:32] <katsmeow> Please enable JavaScript to use GrabCAD" , otherwise a blank page
[23:01:35] <Tom_shop> https://grabcad.com/library/flip-top-benchtop-router-table-1
[23:01:46] <Tom_shop> what sort of table do you want?
[23:01:58] * katsmeow pokes rue
[23:02:50] <katsmeow> one with a vac, a guide, and a backsplash, blue lites, and a subwoofer
[23:04:39] <katsmeow> that table was made by a left-hander
[23:05:05] <rue_shop3> ARG I FORGOT THE SUBWOOFER
[23:05:33] <katsmeow> Tom, that backsplash is not adjustable
[23:05:48] <katsmeow> best it's even replaceable for different bits
[23:06:08] <Tom_shop> https://grabcad.com/library/cnc-router-table
[23:06:50] <katsmeow> diy 6-jaw metal lathe chuck?
[23:07:04] <katsmeow> wait, i know: build one jaw, repeat
[23:07:40] <Tom_shop> https://grabcad.com/library/10-inch-6-jaw-lathe-chuck--1
[23:08:05] <katsmeow> <blink>
[23:09:49] <katsmeow> cheat! he just made animations, he mad no chuck
[23:10:29] <Tom_L> solidworks part
[23:10:54] <Tom_L> full file set
[23:11:13] <katsmeow> harborfreight's best(?) baby lathe is now nearly $1000
[23:11:21] <katsmeow> their cheapest is over $500
[23:14:11] <rue_shop3> kat are you giving up on me!? :/
[23:15:20] <Tom_L> i'm giving up on this day...
[23:15:34] <katsmeow> rue, should i?
[23:15:45] <Tom_L> never
[23:17:45] <rue_shop3> no dont give up
[23:17:55] <rue_shop3> if you give up on me, I will too, and thats bad
[23:18:06] <katsmeow> yea,,, i spose
[23:18:54] <Tom_L> kat could set up for the 2nd op while waiting
[23:19:33] <rue_shop3> well yea.
[23:19:39] <katsmeow> Tom, nope, been burned to many times by putting time and money and emotion into someone dropping the ball and making everything i di dbe a waste
[23:20:23] <katsmeow> my roof should have been done 15 yrs ago, the move to Fla should have happened, etc etc
[23:20:42] <Tom_L> i should never help anyone but myself
[23:21:58] <katsmeow> umm, i didn't say that
[23:22:21] <katsmeow> rue started off by making one, and then explaining that he could not make any more
[23:22:24] <Tom_L> i did
[23:22:36] <Tom_L> he could make air cuts
[23:22:54] <Tom_L> my understanding was he is out of material temporarily
[23:23:54] <katsmeow> and out of time and energy
[23:24:26] <rue_shop3> katsmeow,
[23:24:35] <rue_shop3> I said I didn't have the material to make 8
[23:24:36] <Tom_L> life does that to us sometimes
[23:24:42] <Tom_L> like getting robbed etc
[23:24:56] <rue_shop3> I have enough for about 4, I'm gonna hit the scrap metal yard tommorow
[23:25:02] <rue_shop3> I didn't get the chance today
[23:25:15] <katsmeow> yeas, the post aweful delivered some bearings to the wrong addy today, and then when i did get them i discover the seller shipped the wrong part
[23:27:56] <katsmeow> did you know blue tarp shrinks when laid out , cut to precise size, and the edges secured with screws?
[23:28:09] <katsmeow> i didn't
[23:28:15] <Tom_L> no
[23:28:30] <rue_shop3> what type of plastic is it?
[23:28:45] <katsmeow> polyethylene
[23:29:06] <katsmeow> generic blue chinese tarp
[23:29:09] <Tom_L> they are rather cheap
[23:30:08] <katsmeow> a 29x26 isn't all that cheap, and i was going to put epdm over it, but had the plastic shrunk after i put the epdm on it, thent he rubebr would be bunched up in the middle around the drain and pulled off the walls around the edges
[23:30:45] <katsmeow> cheap is ne thing, not dimensionally stable when used outside according to directons is something else
[23:33:03] <katsmeow> now i know why almost every tarp i tied into place ripped apart, it wasn't the wind pulling on it, it shrank and pulled itself apart
[23:35:36] <rue_shop3> springs
[23:36:18] <katsmeow> yeas, because bungie cords rot in the sunlite too
[23:36:38] <rue_shop3> yea, I got lotsa rotten ones if you would like
[23:36:50] <rue_shop3> they were holding togethor a tent
[23:37:17] <katsmeow> no thanks
[23:37:42] <katsmeow> i bought a cargo net that looked really like real rope, turns out it is bungie cord
[23:53:37] <katsmeow> ...
[23:53:54] <rue_shop3> ...---
[23:55:12] <katsmeow> ,,,,=<oo>=,,,,
