Back
[00:10:08] * katsmeow just uploaded other shenanigans she once did
[00:10:13] <katsmeow> http://DesignerThinking.com/JL/yep,_it's_bent.jpg
[00:10:20] <katsmeow> http://DesignerThinking.com/JL/i_resurfaced_it_in_place.jpg
[00:11:02] <rue_house> it dosn't net cost you money to sue them does it?
[00:11:42] <katsmeow> sue? huh?
[00:11:49] <rue_house> was the plate all they bent? the axle was ok?
[00:12:05] <katsmeow> i bent it, the axle was siezed in the hub, really bad
[00:12:16] <rue_house> oh
[00:12:20] <katsmeow> it had been so hot, the metal was discolored
[00:12:23] <rue_house> its not the flatbed
[00:12:26] <katsmeow> car
[00:12:39] <rue_house> ok, kat, how did you bend it???
[00:12:54] <katsmeow> wheelpuller
[00:13:13] <rue_house> uh
[00:13:28] <katsmeow> still had to pound on the axle with all my might, small 5lb sledge for shock value
[00:13:44] <katsmeow> it was the arms on the wheel puller that bent it
[00:13:49] <rue_house> yea
[00:14:16] <rue_house> wait, the wheel was siezed to the hub?
[00:14:33] <rue_house> brakes??
[00:14:49] <katsmeow> the axle was siezed in the hub, front wheel drive
[00:15:14] <rue_house> oh
[00:15:28] <rue_house> bearing shot?
[00:15:31] <katsmeow> it was bent enough the rotor might have cracked if i put it (and the wheels) on and torqued it
[00:15:41] <katsmeow> bearings are stiff, but smooth
[00:16:17] <rue_house> why did it need to come apart?
[00:16:19] <katsmeow> i thought i might get 100 miles on that hub, but i have put 1000's on it
[00:16:26] <rue_house> oh
[00:16:28] <katsmeow> bad cv joints
[00:16:34] <rue_house> ooh
[00:16:45] <rue_house> crackle crackle?
[00:16:54] <katsmeow> and clack grind
[00:17:14] <rue_house> I know a few peoples whos went zing, and their car didn't
[00:17:25] <katsmeow> the forest critters here eat the rubber off the joints
[00:17:38] <rue_house> thats not good for their corrosion resistance
[00:17:45] <katsmeow> i know
[00:18:21] <rue_house> we destroy cars by salting the roads in winte
[00:18:22] <rue_house> r
[00:18:39] <rue_house> I should wash of last winters salt...
[00:18:43] <katsmeow> next time, i may likely soak some cloth in latex paint, and wrap the rubber, and hose clamp it to the axle
[00:19:39] <rue_house> oooh ali express changed their site again
[00:20:28] <rue_house> damn, I'm falling asleep again
[00:20:40] <rue_house> I wanted to get more work done on the new 3d printer
[00:20:43] <rue_house> I made a plate for it
[00:20:51] <rue_house> cant work out how to mount the extruder
[00:21:03] <katsmeow> same as the last time?
[00:21:15] <rue_house> na, I redesigned a lot of it
[00:21:25] <katsmeow> o
[00:21:40] <rue_house> instead of cutting the 3' rods in funny lenghted peices, I designed it to just cut them in half
[00:21:51] <rue_house> which was only a few inches out
[00:22:03] <katsmeow> it's all adjustable
[00:22:09] <rue_house> then I beefed up the size of two of the slide rods
[00:22:23] <rue_house> cahnged some angles, geared some motors...
[00:22:51] <katsmeow> why side rods, instead of heavy structural steel channel or beams?
[00:23:16] <rue_house> keeping it to a minor change of the orig
[00:23:29] <rue_house> try to solve more of the origional problems than make new ones
[00:23:50] <katsmeow> o
[00:25:50] <rue_house> hmmm idea
[00:26:08] <rue_house> but I need to sleep
[00:26:15] <rue_house> I'm tired and my muscles hurt
[00:26:21] <rue_house> I wish I was a robot
[00:27:17] <katsmeow> with skin that sensed touch and temperature?
[00:29:30] <katsmeow> maybe that was my first lathe, a fwd flange spun by a 4-cyl car engine
[00:31:34] <katsmeow> grabbing megabytes of multi-words sayings definitions for Tiggr, like "along these lines", "at present" , "after a while"
[00:33:12] <rue_bed> hmm
[00:33:30] <rue_bed> I need to read the neuron stuff more
[00:33:49] <rue_bed> more understanding of things in general it needed
[00:33:54] <rue_bed> pfm logic
[00:34:47] <katsmeow> 1.7 GB, 32,300 files, so far
[03:30:49] <Jymmm> rue_house: OUCH to hearing you got robbed. Was this doing the daytime? Have motion lights?
[03:31:05] <Jymmm> s/doing/during/
[03:33:18] <Jymmm> Over the years I've come to realize that crime is very much like cockroaches... It's always the no/dimmly lit areas that get robbed, but turn on the lights and they scatter like crazy.
[03:34:02] <Jymmm> Plus if you have a few motion lights, you can tell where something is happening
[03:54:26] <Jymmm> rue_house: Also, a 2MV stun gun wired to a door knob works well as a deterrent ;)
[09:22:47] <rue_bed> AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaa its 6:53imisseedmyalarmimlatetogettowork
[09:22:56] <rue_bed> oh wait... its saturday
[11:03:51] <Jymmm> rue_house: go back to bed insted =)
[11:21:09] <rue_house> Jymmm, no, tom got robbed
[11:22:25] <Jymmm> rue_house: oh
[11:22:33] <Jymmm> Tom_L: ouch on the break in =(
[11:23:23] <Jymmm> rue_house: how goes it, besides waking up late when you didn't have to ;)
[11:23:47] <rue_house> had shower
[11:24:02] <rue_house> day: |========> |
[11:25:42] <Jymmm> rue_house: Did my question (above) make any sense?
[11:27:47] <Jymmm> rue_house: If not, maybe this will help...
http://pastebin.com/cMXFZ3kM
[11:38:33] <rue_house> ask tom , not sure when it happened
[11:38:57] <rue_house> oh
[11:39:10] <rue_house> the AC coils have too fine fin spacing
[11:39:18] <rue_house> clogg up with ask
[11:39:20] <rue_house> ash
[11:40:17] <rue_house> oh thats alot more detail
[11:41:32] <rue_house> its all about where you inject the air
[11:45:17] <Jymmm> inject? As in the fan blowing on the radiator you mean?
[11:47:19] <Jymmm> rue_house: I can always use an (hvac) air filter for the fan to prevent clogging, but I wasn't sure on the 1/4" lines
[12:18:16] <rue_shop3> not from a wood fure
[12:20:11] <Jymmm> rue_shop3: Oh, I' NOT putting one of the radiator cores in the fire, but would get some copper tubing and use in the firebox.
[12:20:19] <Jymmm> I'm*
[21:57:24] * katsmeow winds up and throws an url into the channel : http://manuals.chudov.com/Encyclopedia-of-Engineering.pdf
[22:29:50] <katsmeow> ...
[22:35:22] <Tom_L> 1910
[22:36:04] <katsmeow> yeas, but, rue has a boiler
[22:36:11] <Tom_L> o
[22:36:24] <Tom_L> i didn't look at it much
[22:36:28] <Tom_L> loaded slowly
