Back
[00:57:44] <The_Jester> Greets
[01:05:59] <rue_shop3> hey
[01:06:05] <rue_shop3> zack is here
[01:06:15] <rue_shop3> I printed a whistle, it dosn't work
[01:15:27] <The_Jester> Lulz
[01:15:42] <The_Jester> https://www.youtube.com/watch?v=EOjSoGqz6l8
[01:15:50] <The_Jester> look at that..lol
[01:18:24] <The_Jester> What are yiu fuys doing?
[01:18:29] <The_Jester> grr
[01:19:06] <rue_shop3> I'm fixing my motor driver
[01:19:38] <rue_shop3> zack is trying to build a 40W audio amp
[01:19:45] <The_Jester> https://drive.google.com/open?id=0B7PtpEbLy8aldE9zcHZVcTRKcWs
[01:19:55] <rue_shop3> odd, that youtube link wont play
[01:20:06] <The_Jester> WTF
[01:20:20] <rue_shop3> dunno
[01:20:26] <rue_shop3> its in chrome
[01:20:35] <rue_shop3> maybe chrome is obsolete now too
[01:20:45] <rue_shop3> FFFing internet cant stay put for 5 mins
[01:21:14] <The_Jester> the internet works fine, your broken
[01:23:03] <The_Jester> https://drive.google.com/open?id=0B7PtpEbLy8alcEtQd2hlR2tVaGc
[01:23:12] <The_Jester> print that x2
[01:23:45] <The_Jester> shame that video wont load, its a review for the dremel 3d printer
[01:24:40] <The_Jester> looks like its 1.7pla only but the prints are nicer than ours.. But you would expect that for $1400
[01:31:30] <rue_shop3> its an ino
[01:31:45] <rue_shop3> you should buy Als printer
[01:32:00] <rue_shop3> its a commercial one that dosn't 'just print'
[01:32:22] <rue_shop3> armyofevilrobots learned that paying lots of money dosn't just make thing work
[01:32:29] <rue_shop3> we can all learn his lesson too :)
[01:37:12] <The_Jester> Video is some guys review, Printer will accept a sd card or direct usb connectiong, Dremel site has lots of models for beginners ect and reviewer goes on the explain that it will load stl files and demonstrates the gui on the touch panel. Nice little printer.
[01:38:02] <The_Jester> be great for like a classroom. Looks like it just works
[01:38:39] <The_Jester> sell them at home depot and canadiann tire...
[01:39:09] <The_Jester> I would consider buying one used in the future as a toy
[01:39:40] <The_Jester> So any ideas for hex code, mapping?
[01:49:54] <The_Jester> https://www.dropbox.com/s/t4vd0kmnle4gffp/2016-03-08%2021.32.14.jpg?dl=0
[02:00:15] <rue_shop3> sorry I'm hal here
[02:00:32] <rue_shop3> the freaking motor driver I tested before I built wont work like it did when I was testing
[02:01:07] <The_Jester> http://e3d-online.com/V6-Sock-Kit-3-Pack
[02:01:14] <rue_shop3> filament maker?
[02:01:44] <rue_shop3> I can just wrap high temp around mine
[02:02:15] <rue_shop3> or use high temp silicone, easy
[02:02:39] <rue_shop3> I had insulation around mine, but it was so annoying when I had to keep wrorking on it I left it off
[02:03:13] <The_Jester> http://www.filastruder.com/products/filastruder-kit
[02:03:27] <The_Jester> thats silicone
[02:03:38] <The_Jester> better than tape
[02:03:44] <The_Jester> or fiberglass
[02:04:00] <rue_shop3> funny thats most of the parts I have in the bin for the one to build
[02:04:25] <The_Jester> yeah buddy
[02:04:53] <rue_shop3> I wonder if they used a drill bit for a feeder screw
[02:06:05] <rue_shop3> oh yea it is too
[02:06:21] <rue_shop3> they even came up with a gearbox that fits the hex for it
[02:06:46] <rue_shop3> assembly instructions, ha
[02:07:27] <rue_shop3> 5clicks.... 6....
[02:10:55] <rue_shop3> and its a zip file, screw it
[02:11:12] <rue_shop3> FOOD!
[02:11:15] <The_Jester> was a kick sstarter so im sure its pretty open
[02:17:11] <The_Jester> Where was the retract setting in slicer?
[02:19:04] <The_Jester> nvrmnd
[02:21:03] <rue_shop3> extruder
[02:28:56] <rue_shop3> wow, kinda tired, having a hard time reading
[02:38:47] <rue_shop3> The_Jester, you gonna come by make things with your new plastic?
[08:13:19] <Tom_itx> read that as rue is out of plastic and needs yours :D
[11:22:50] <rue_bed> heh no
[11:23:17] <rue_bed> jester is jester is just itching to do 1kg prints :)
[11:23:29] * rue_bed segfaults
[11:23:49] <rue_bed> I have to go find a cat
