Back
[00:00:47] <rue_house> ?
[00:01:14] <katsmeow> [23:20] <katsmeow> 40msps :
http://www.ebay.com/itm/1PCS-TLC5540IPW-IC-8-BIT-PAR-A-D-CONV-24TSSOP-5540-TLC5540/191896662602
[00:01:14] <katsmeow> [23:24] <katsmeow> THREE 140msps a-d convertors :
http://www.ebay.com/itm/160841714100
[00:01:14] <katsmeow> [23:31] <rue_house> but I HAVE the 20msps
[00:03:20] <rue_house> I'd like to work with what I have
[00:03:43] <rue_house> I realize that at the same tiem I said that Im getting a 74Mhz processor, Iwas getting it for other easons
[00:03:46] <katsmeow> me too, but i throw out data sheets only when around you
[00:04:28] <rue_house> I appreciate your input on part numbers
[00:04:54] <rue_house> it would be nice to know if I have any faster ones around
[00:05:29] <rue_house> 14444
[00:06:29] <katsmeow> i bet you do, hence one of the urls i gate you, but i regret looking it up and posting it in here
[00:07:11] <rue_shop3> :/
[00:07:33] <rue_shop3> I dont know what processor to use on'
[00:07:38] <rue_shop3> this motor controller
[00:07:50] <rue_shop3> I need avr, with 16Mhz, async serial and 8 channel adc
[00:07:57] <rue_shop3> and preferably have it
[00:08:03] <rue_shop3> which would make it the mega32
[00:08:29] <rue_shop3> but then I might as well do software pwm
[00:08:49] <rue_shop3> and part of the goal was to implement using a TLC5934
[01:07:37] <rue_house> katsmeow, first letter, cool dream!
[01:08:26] <katsmeow> k
[01:08:40] <katsmeow> |
[01:08:42] <katsmeow> <
[01:08:55] <rue_house> hmm
[01:09:37] <rue_house> ok I read them all, processing
[01:10:07] <rue_house> I cant grasp the volume or latency of tea to keep me up after work
[01:10:46] <katsmeow> or doseage of active ingredients
[01:10:47] <rue_house> hmm, muffler script...
[01:14:47] <rue_house> I had problems controlling my dreams
[01:14:49] <rue_house> in order to make an elevator appear, I had to have it appear behind me so that I could turn around and it would be there
[01:14:49] <rue_house> I wonder if I could work out lucid dreaming again
[01:14:50] <rue_house> it might help get some things done while I'm asleep
[01:14:51] <rue_house> hmm, might help me have a sexlife too
[01:14:52] <rue_house> meh
[01:14:52] <rue_house> katsmeow,
[01:15:05] <katsmeow> rue,
[01:15:06] <rue_house> if you die $500000 in debt, does the govt and banks have to just suck it up
[01:15:07] <rue_house> ?
[01:15:34] <katsmeow> most debtors have insurance
[01:16:02] <katsmeow> otherwise, yep, they write it off their taxes as a unrecoverable outside loss
[01:16:04] <rue_house> well, if you die with $500000 in assests, they would get that wouldn't they?
[01:16:09] <katsmeow> yeas
[01:17:04] <rue_house> so, the sytem pays you for not having kids or a family
[01:17:15] <rue_house> in a way
[01:17:42] <katsmeow> how?
[01:18:15] <rue_house> well, you can rack up as much debt as you like without anyone you love sufferign any conciquinces
[01:18:52] <katsmeow> as a business, you can do that anyhow
[01:18:58] <rue_house> unless you love your bank ceo or hate your family...
[01:19:13] <rue_house> how do you mean?
[01:20:17] <rue_house> hmm getting into lucid dreaming to have a sexlife almost seems like a fiar payoff
[01:20:26] <rue_house> its a lot of work
[01:20:34] <katsmeow> lotas ceos get bonuses just before they bankrupt a business, it;s the amerikan way
[01:20:42] <rue_house> I wonder how hard you can bind a personality before it splits
[01:22:02] <rue_house> if you get paid $1M/year from a business and "put $500k/year" into it, you can prove that your one of the main financial contributors who is losing money from it going under
[01:22:33] <rue_house> one of the businessmen here did that
[01:22:59] <rue_house> had about 6 major other businesses who lost more than $50k when his company went under
[01:23:17] <rue_house> but he managed to work it that he'd lost more
[01:23:47] <rue_house> so he's not responcable for paying any of the businesses owed back
[01:24:17] <katsmeow> as an employee, he isn't responcible for the business debt anyhow
[01:24:32] <rue_house> yea, they blamed it on the bookkeeper
[01:24:47] <rue_house> our comany only lost about $5k
[01:24:56] <rue_house> to his
[01:26:15] <rue_house> http://www.coastreporter.net/news/local-news/millions-owed-to-creditors-as-wakefield-goes-under-1.1746349
[01:26:59] <rue_house> goodnight
[01:27:34] <rue_house> Lance was rennovating his new $2M house about a month after the bankrupcy
[01:28:01] <rue_house> dont go thinking its his only house either!
[01:29:45] <katsmeow> wakefield, the heatsink company??
[01:30:34] <rue_house> no, a local construction company
[01:30:40] <rue_house> a big one
[01:30:44] <katsmeow> o
[01:30:51] <rue_house> there are 2 other big ones
[01:31:19] <katsmeow> well, grab up the lil stuff they cannot return to the creditors
[01:31:33] <rue_house> it was quite a while ago
[01:31:49] <rue_house> jan 30/2015
[01:32:10] <rue_house> most of the employees got their layoff notices just before christmas
[01:32:46] <rue_house> Tom_itx, you been quiet
[01:32:57] * katsmeow nods, the end of the fiscal year bits people badly
[01:33:08] <rue_house> __m00n__,
[01:33:10] <rue_house> I have an idea
[01:33:17] <rue_house> for the phone
[01:33:49] <rue_house> access a webpage here thru the tunnel and see what IP it shows you at
[01:36:56] <rue_house> __m00n__, 192.168.9.182/~jukebox/cgi-bin/whoami.cgi
[01:37:19] <rue_house> gngiht
[01:39:55] <katsmeow> 1 ð3 ¤12 °6º3o6 ø6 ö3 ð1 ¤1Õ12Ø10 O7Ò3 Ó14Ô10Õ14 Ø14 O10 Ò6 Ó
[01:43:04] <rue_bed> my network switch seems to be generating errors, gonna restart it
[01:43:50] <rue_bed> a 1G switch with a 1k brain
[01:47:42] <rue_bed> __m00n__, oh, looka that, the phone system has a bad network cable
[01:48:03] <rue_bed> there are literally hundreds of errors racked up on the network card stats
[01:48:29] <rue_bed> it needs a new cable or something... ugh
[01:48:44] <rue_bed> later
[02:23:21] <__m00n__> im back
[02:23:40] <__m00n__> im sleep now actually
[02:23:41] <katsmeow> some people check to see if the flashlite works by aiming it at their face and turning it on, shame they don't test if the gun is loaded the same way
[02:23:49] <__m00n__> XD
[18:10:08] * moon___ farts
[19:47:22] <rue_house> mmmmMMMOOOOOOOOONNNNNNNNNNNNNNN!
[20:33:37] <Tom_itx> ping
[20:34:03] <Tom_itx> ok most things are back the way they were
[20:57:41] <zhanx> Wonder if I sleep today. It's been 48 hours or if I should wait till tomorrow
[21:02:42] <rue_shop3> odd
[21:05:05] <Tom_itx> mmm
[21:05:10] <Tom_itx> maybe i'm done moving for a while
[21:05:24] <rue_house> moving!?
[21:05:37] <rue_house> so can I get that board?
[21:05:48] <rue_house> Tom_itx, were you kicked out of the house too?
[21:05:48] <Tom_itx> i had to move all my pc's
[21:05:52] <Tom_itx> no
[21:05:56] <Tom_itx> just to paint
[21:05:58] <rue_house> k
[21:06:01] <rue_house> ah
[21:06:20] <Tom_itx> things are mostly back where they're supposed to be
[21:07:01] <rue_house> I'm gonna try to make a 1000 led scope
[21:07:07] <Tom_itx> you want it?
[21:07:08] <rue_house> tho
[21:07:28] <Tom_itx> i sent you the pdf for it
[21:07:32] <rue_house> well, I think I do, Its not worth $50 in chipping for me tho
[21:07:36] <rue_house> yea
[21:07:45] <rue_house> it looks good, like a good one to develop on for the others
[21:07:54] <Tom_itx> i can probably send it in a padded envelope
[21:08:17] <Tom_itx> it's still in the blister pack
[21:09:59] <rue_house> remember, label it dildo so customs dosn't get interested. :D
[21:10:17] <zhanx> Fleshlight?
[21:10:20] <rue_house> I'm getting bad, i need help
[21:10:46] <Tom_itx> bomb making device.. fuses inclosed please ignore
[21:11:09] <rue_house> it would arrive with an escort
[21:11:12] <zhanx> If you want a dildo instead of a fleshlight that's your call, but I agree with tom
[21:11:44] <zhanx> That or biohazard, dead ameba
[21:11:44] <rue_house> it was the least deacent thing I could think of
[21:12:06] <rue_house> flesh eating virus, open with caution.
[21:12:17] <Tom_itx> dear customs, please just look for the yard with all the world conquering mechs in the front yard
[21:12:39] <rue_house> ok I think I can use THIS peice of veroboard for the led scope
[21:13:05] <rue_house> zhanx/tom I'm gonna make a 1000 led scope with some LM3914 and 4017
[21:13:06] <zhanx> Brain eating zombie prototype excerise extreme caution
[21:13:19] <zhanx> Why?
[21:13:25] <rue_house> I *just* got the 1000 leds
[21:13:27] <rue_house> (blue)
[21:13:38] <rue_house> I need entertaining distraction
[21:13:51] <rue_house> an led scope is on my bucket list
[21:13:55] <zhanx> 100x 10 grid
[21:14:03] <rue_house> no, 40*25
[21:14:10] <rue_house> voltage 40 levels, time 25 levels
[21:14:17] <rue_house> cause time is easier to zoom in on
[21:14:23] <zhanx> K
[21:14:32] <Tom_itx> gonna make a what?
[21:14:37] <rue_house> led scope
[21:14:46] <Tom_itx> ok
[21:14:54] <rue_house> using bar graph and johnstone counter chips
[21:15:32] <Tom_itx> turns out these new monitors i got don't have speakers
[21:16:39] * rue_house pulls out a soldering iron and a glue gun
[21:16:44] <Tom_itx> does that square dvi cable have audio out?
[21:16:49] <Tom_itx> err nevermind
[21:16:56] <Tom_itx> wouldn't matter anyway
[21:16:58] <zhanx> Yes
[21:17:04] <Tom_itx> good to know anyway
[21:17:13] <zhanx> If no speakers it no matter
[21:17:32] <Tom_itx> they've got a plug for the cable but after closer inspection it says audio out
[21:17:32] <zhanx> It's line level for the sound fyi
[21:17:33] <Tom_itx> wtf
[21:18:08] <zhanx> The output is suppose to amplify it
[21:18:14] <Tom_itx> so i suppose some slimline speaker arrangement may be in order
[21:18:36] <Tom_itx> i saw a dell clipon but i don't have dell monitors
[21:18:55] <zhanx> Sound bars are getting nicer and look like shelves now
[21:19:14] <Tom_itx> got a link to any
[21:19:16] <Tom_itx> ?
[21:19:23] <Tom_itx> cheap...
[21:19:27] <zhanx> Best buy brb
[21:19:33] <zhanx> Oh cheap no
[21:19:37] <zhanx> 200ish
[21:20:07] <Tom_itx> i don't need to hear you that bad
[21:20:28] <zhanx> http://www.bestbuy.com/site/corliving-wall-mount-soundbar-shelf/3424038.p?id=1219091398273&skuId=3424038&lsft=ref:212,loc:1&ksid=22d01b94-d6aa-47ce-9161-142727fdc813&ksprof_id=16&ksaffcode=pg42330&ksdevice=t&ref=212&loc=1&gclid=Cj0KEQjwwMi7BRDGptbvwOCDj8oBEiQAIALyDCIkN4FoAN-Cm050Hgz8cIf3sfSBmozJ9SCKlJ7FENIaAkdZ8P8HAQ
[21:21:40] <zhanx> What I meant to link
http://www.bestbuy.com/site/bello-40-digital-soundbar-shelf-espresso/
[21:21:50] <Tom_itx> i do like these dual 23" monitors though
[21:22:40] <Tom_itx> last link 404
[21:22:54] <rue_shop3> YOU KNOW, 1000 isn't a small number
[21:23:08] <zhanx> http://www.bestbuy.com/site/bello-40-digital-soundbar-shelf-espresso/7794038.p?id=1219684757970&skuId=7794038
[21:23:08] <Tom_itx> it will work over your soldering skilz
[21:23:24] <zhanx> Screw that reflow them
[21:23:33] <rue_shop3> as it turns out, leds have 2 leads, so you acutally need 40*50 holes to make a 40*25 led board
[21:23:46] <Tom_itx> 210 is a bit much
[21:24:03] <rue_shop3> AND, as it turns out, rectangular leds cant be put side by side, they are a hair wide
[21:24:06] <zhanx> Well check pricewatch.com then
[21:24:33] <zhanx> Sand them rue
[21:24:52] <Tom_itx> http://www.pcliquidations.com/p19284-dell-as500-sound-bar?utm_source=google&utm_medium=cse&utm_term=19284&r160164167166161&gclid=CI7_lqKRzM0CFQYuaQodOyAPnA
[21:24:53] <Tom_itx> hah
[21:25:19] <rue_shop3> ok, you sand down 500 and I'll sand down 500
[21:25:56] <rue_shop3> I recon I'll use two protoboards
[21:26:10] <rue_shop3> you know, what, sanding down leds, dosn't sound really fun
[21:26:22] <Tom_itx> cnc em
[21:26:23] <Tom_itx> silly
[21:26:41] <Tom_itx> make a jig and do a jig while milling em
[21:26:51] * rue_shop3 thinks about this
[21:27:00] <rue_shop3> I bought exactly 0 spare leds
[21:27:01] <rue_shop3> hmmm
[21:27:11] <Tom_itx> mistake #1
[21:27:27] <rue_shop3> I was also being compulsive
[21:27:49] <rue_shop3> damn this plan for not working without havning to think it out
[21:28:37] <rue_shop3> so...
[21:28:47] <rue_shop3> the holes are .2" total
[21:29:02] <Tom_itx> mmm after hooking things back up i ended up with a few extra cords
[21:29:14] <rue_shop3> the leds are .203"
[21:29:33] <rue_shop3> @$%&@#$%@&?
[21:29:53] <rue_shop3> so if I rube them vigerously against my face they will be the right size?
[21:31:47] <rue_shop3> ooo the toher dim of the leds is .107"
[21:33:38] <Tom_itx> man, this is the cleanest this desk will EVER be
[21:53:48] <rue_shop3> ok I finished 40 leds
[21:53:59] <rue_shop3> if I do 1 column a week
[21:54:06] <rue_shop3> 25 weeks
[21:54:08] <rue_shop3> ...
[21:56:53] <rue_shop3> better be carefull to get my anodes and cathodes the right way around!
[22:09:39] <rue_shop3> I think 2 cups of tea did it, I seem to be staying awake
[22:13:46] <rue_shop3> if I use a tiny26 for the adc on the loop controller, I can have the code ready for the mecha
[22:14:19] <rue_shop3> but it looks like I'd have to use a mega8 to do the loop calcs, awefull big chip for managing 3 serial connections
[22:14:53] <rue_shop3> unless I have it do the F/R outputs, and change to 16 channels
[22:15:13] <rue_shop3> 8 channels was a fine goal
[22:38:21] <rue_house> I should write the adc code
[22:41:18] <rue_house> wow, T1 channels use 1 bit per 192 bits for framing
[22:45:22] <rue_house> __m00n__,
[22:45:30] <rue_house> the phone system has a bad eithernet cable
[22:45:37] <rue_house> if I replace it, the phone might work
[22:46:06] <zhanx> So on a good note for zhanx
[22:46:19] <zhanx> My ptsd and new meds suck bad
[22:46:49] <rue_house> kat called it
[22:46:49] <zhanx> But my boss said I am not fired and locked up my tool boxes
[22:47:06] <zhanx> When the meds even out I got lots of work to do
[22:47:06] <rue_house> ...?
[22:47:30] <__m00n__> JBWDIUHBVSCUIVCSUJCS
[22:47:33] <__m00n__> YEAH
[22:47:46] <zhanx> Aka, I am good at my job, boss likes me, secured my stuff didn't fire me
[22:47:55] <rue_house> __m00n__, there you are, I'll find a new cable
[22:51:33] <__m00n__> ok
[22:52:26] <rue_house> I found a worse cable!
[22:54:39] <zhanx> Cat 4?
[22:55:11] <zhanx> Wait a coaxial for a topo ring?
[22:56:30] <rue_house> dunno, dont care
[22:56:55] <__m00n__> :|
[22:57:45] <rue_house> oooh, the bed is standing on the old cable
[22:57:52] <rue_house> that might be the cause of failure
[22:58:25] <rue_house> moon do you still have the ssh tunnel working?
[22:59:03] <rue_bed> ah there!
[22:59:23] <rue_bed> eth1 Link encap:Ethernet HWaddr 00:14:2a:cc:2b:e5
[22:59:23] <rue_bed> inet addr:192.168.8.100 Bcast:192.168.8.255 Mask:255.255.255.0
[22:59:23] <rue_bed> inet6 addr: fe80::214:2aff:fecc:2be5/64 Scope:Link
[22:59:23] <rue_bed> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[22:59:23] <rue_bed> RX packets:4847951 errors:486 dropped:0 overruns:0 frame:872
[22:59:24] <rue_bed> TX packets:4978421 errors:0 dropped:93 overruns:0 carrier:0
[22:59:26] <rue_bed> collisions:0 txqueuelen:1000
[22:59:28] <rue_bed> RX bytes:1955466237 (1.8 GiB) TX bytes:2278258912 (2.1 GiB)
[22:59:30] <rue_bed> Interrupt:19 Base address:0xd000
[22:59:35] <rue_bed> thats what bad stats for an interface look like
[23:01:52] <__m00n__> remind me of the tunnel
[23:02:00] <__m00n__> I need to respawn it i think
[23:02:18] <rue_bed> history |grep ssh ?
[23:02:49] <__m00n__> ok
[23:03:43] <__m00n__> what address do i use in webbrowser to test?
[23:04:01] <rue_bed> you would have to make a special tunnel to the jukebox
[23:04:07] <__m00n__> ok
[23:04:10] <rue_bed> I cant remmebe the tunnel commands
[23:04:16] <rue_bed> the jukebox is ...
[23:04:36] <rue_bed> 192.168.9.182
[23:06:50] <__m00n__> ssh -L 5060:192.168.25.103:5060 z4ck@205.250.204.74 1965 ssh -f z4ck@205.250.204.74 -L 0.0.0.0:5060:192.168.8.100:5060 -N 1974 ssh -f z4ck@205.250.204.74 -L 0.0.0.0:82:192.168.8.240:80 -N 1979 ssh -f z4ck@205.250.204.74 -L 0.0.0.0:16482:192.168.8.100:16482 -N 1983 ssh -f z4ck@205.250.204.74 -L 0.0.0.0:16384:192.168.8.100:16384 -N
[23:07:03] <__m00n__> fuck that came out wrong
[23:07:07] <rue_bed> hmmm
[23:07:14] <__m00n__> pids' are on the end
[23:07:50] <rue_bed> ouch my brain
[23:08:06] <rue_bed> not1965
[23:08:21] <rue_bed> -N?
[23:08:26] <rue_bed> oh I see
[23:09:07] <__m00n__> end with -N
[23:09:11] <rue_bed> so can you still bring up the webpage on port 80? I thought we hooked it to 82
[23:09:28] <__m00n__> not yet
[23:09:38] <__m00n__> im tring a few of these commands
[23:10:11] <rue_bed> wait, lets kill them all and start fresh
[23:10:32] <__m00n__> ok
[23:10:51] <__m00n__> done
[23:11:24] <rue_bed> ok, so, start with
[23:12:48] <rue_bed> ssh -f z4ck@205.250.204.74 -L 0.0.0.0:82:192.168.9.182:80 -N
[23:13:02] <rue_bed> say when
[23:14:31] <rue_bed> browse to
http://localhost:82/ , see what you get
[23:16:45] <rue_bed> did you forget the password?
[23:17:00] <rue_bed> you cant, there isn't one
[23:17:06] <rue_bed> I set you up with a kat
[23:17:09] <rue_bed> key
[23:18:12] <rue_bed> ok I got my voip phone working
[23:18:58] <zhanx> Call me
[23:19:07] <rue_bed> ZHANX!!!!
[23:19:08] <katsmeow> call zhanx
[23:19:11] <zhanx> 1900 to sexy for my chip
[23:19:15] <rue_bed> ZHANXXXXXXXXXXXXXX!!!!
[23:19:27] <rue_bed> hi kat
[23:19:39] <rue_bed> I got the bed voip phone working
[23:19:58] <rue_bed> wait, I dont think its supposed to stay in bed
[23:20:10] <rue_bed> its just here so I could set it up at night before I go to sleep
[23:20:11] <zhanx> So you can call me wait laying in bed
[23:20:18] <zhanx> Never mind
[23:20:28] <rue_bed> while, I heard what you meant
[23:20:38] <zhanx> Nope
[23:20:45] <rue_bed> ?
[23:21:09] <zhanx> I think your earlier thing came to mind not mine
[23:21:36] <zhanx> Do I need to repeat them rue....
[23:21:58] <rue_bed> mybrain is shutting down
[23:22:05] <zhanx> Shipping packages
[23:22:10] <rue_bed> moon needs to know I'm at extension 603
[23:22:28] <zhanx> Great
[23:22:38] <rue_bed> I have to go make supper
[23:23:10] <zhanx> In bed, does that make for messy sheets?
[23:23:32] <rue_bed> I cant eat in bed
[23:23:50] <zhanx> I am surprised you eat
[23:23:59] <zhanx> Fyi I had meat for dinner
[23:24:14] <rue_bed> http://ruemohr.org/~ircjunk/house/dscn7993.jpg
[23:24:19] <rue_bed> there isn't headroom
[23:24:30] <rue_bed> (old pic)
[23:24:34] <rue_bed> (same bed)
[23:26:30] <rue_house> so I cant find anything on how a T1 reciever works out its framing
[23:31:21] <rue_house> katsmeow, can you find me a state machine diagram for a T1 framer?
[23:32:05] <katsmeow> no
[23:33:55] <rue_house> they have 1 framing bit, so how do they lock?
[23:35:24] <katsmeow> examples :
https://duckduckgo.com/?q=state+machine+diagram+for+a+T1+frame
[23:35:44] <katsmeow> PDF State Machines and Message Formats for IEEE 802 This document provides state machines and message formats for ... code is used with the state machines). State transition diagrams are used to specify ... T1 ...
[23:35:45] <katsmeow> ieee802.org/1/files/public/docs2007/as-garner-protoco...
[23:47:04] <rue_house> "The Frame Processor acquires frame alignment per
[23:47:04] <rue_house> ITU-T requirement."
[23:47:53] <rue_house> Super Frame (SF) Format
[23:47:53] <rue_house> The structure of T1/J1 SF is illustrated in Table 12. The SF is made
[23:47:53] <rue_house> up of 12 frames. Each frame consists of one overhead bit (F-bit) and 24
[23:47:53] <rue_house> 8-bit channels. Its Frame Alignment Pattern is ?100011011100? for T1
[23:47:53] <rue_house> and ?10001101110X? for J1 located in the F-bit position
[23:49:37] <katsmeow> ask zhanx, he is the one with certs
[23:50:46] <rue_house> oooh
[23:51:13] <rue_house> T1 has a superframe made out of 12 regular frames, the superframe has a pattern of sync bit values that align it all
[23:52:52] <rue_house> When T1s first became available in the 1960s, they implemented a type of framing known as "D1," in which the frame bits were in a repetitive pattern of 10101010101010. This was confused by the telco's 1KHz test tone, which frequently generated this series of numbers. For this reason, the phone company adopted a 1004Hz test tone
[23:52:54] <rue_house> ahahahahahha
[23:52:59] <rue_house> agaghag thats why its 1004hz!
[23:53:28] <rue_house> ok
[23:53:29] <rue_house> ok
[23:53:36] <rue_house> I have to think about this
