Back
[00:03:54] <rue_house> arg, sorry kat, I got distracted
[00:05:32] <rue_house> damnit
[00:05:42] <rue_house> I think I F*(^**(^d a nerve in my thumb
[00:07:34] <rue_house> https://noinotes.files.wordpress.com/2013/02/noi_spotty_thumb_landscape2.jpg
[00:07:37] <rue_house> that one
[00:07:53] <rue_house> my pattern is almost exactly the same
[00:09:06] * katsmeow takes away rue's urple marker
[00:10:16] <rue_house> the left top side of my thumb is all numb
[00:10:24] <rue_house> ARG
[00:10:44] <katsmeow> is that were you usually hit with the hammer?
[00:10:47] <rue_house> PEAK FRUSTRATION
[00:11:01] <rue_house> no I pushed a screwdriver bit into it
[00:11:05] <rue_house> was full speed in a drill
[00:11:13] <rue_house> went thru all 3 layers of skin
[00:11:19] <katsmeow> ouch
[00:11:23] <rue_house> felt really wrong when it happened
[00:11:32] <rue_house> cause it went numb in a funny way
[00:11:51] <rue_house> DAMNIT I LEFT THE WINDOW OPEN
[00:11:56] <rue_house> i need the cats _IN_
[00:15:06] <rue_house> had any cuts that severed nerves? or just crushes?
[00:15:49] <katsmeow> dug a divot outa the space tween thumb and back of hand, that was numb for a while, but all good now
[00:16:11] <katsmeow> drove a nail thru one foot and into the floor i was on, that's ok now too
[00:16:32] <rue_house> phone the isp, damnand to talk to sales and give them the one-two, tell them you will sue them for charging you extra when they said they wouldn't
[00:16:34] <katsmeow> poured melted steel *into* one foot, that healed ok
[00:16:38] <rue_house> damand to be put back on the old plan
[00:16:51] <rue_house> poured steel?
[00:16:53] * katsmeow nods, cannot now, offices are closed
[00:16:54] <rue_house> casting?
[00:17:08] <rue_house> I'm freaked out, this is damage I cant undo
[00:17:22] <katsmeow> no, cut thru a plate, soon as the hole went thru the puddle drained thru it
[00:17:46] <rue_house> when I looked into the gash I was sure I saw nerve fiber, but it was all a mess
[00:17:48] <katsmeow> went thru shoe top, sockes, and skin
[00:17:56] <rue_house> ouch
[00:19:00] <katsmeow> cut up into big toe, thru the toenail, chipped the bone, removed all but the nail bed, all ok now
[00:19:05] <katsmeow> with chainsaw
[00:19:53] <katsmeow> fell off ily pplatform, landed on flashlite jambed up under my ribs, i presume that's ok now, it was int he 1970's
[00:21:07] <rue_house> ouch
[00:21:32] <rue_house> I'll try to reserve my freaking out for a few weeks
[00:21:53] <katsmeow> ran slinter the size of a regular pencil thru my tumb side to side, hit the bone and broke in several pieces, i cut it open with exacto to retieve the pieces, seems to be ok, that was ~1975 too
[00:22:00] <katsmeow> splinter
[00:22:00] <rue_house> the motor driver worked with running it on 5V, but not much of any more speed
[00:22:36] <rue_house> I found out that I have a current controlled motor driver that uses serial to set the phases, just like I did manually
[01:01:22] * katsmeow thinks she should goto bed now
[01:02:27] <katsmeow> gnites
[12:37:40] <Lola8088> http://imgur.com/gallery/FhY0w6i
[20:54:18] <katsmeow> bearing ran a lil rough ==>>
http://DesignerThinking.com/images/DSCF7104m.jpg
[20:55:19] <katsmeow> small but heavy truss ==>>
http://DesignerThinking.com/images/DSCF7106m.jpg
[20:55:24] <katsmeow> small but heavy truss ==>>
http://DesignerThinking.com/images/DSCF7110m.jpg
[20:56:39] * katsmeow sits up on her rabbit feet and looks around the channel
[21:07:49] <katsmeow> i spent many hours trying to get a good reel-reel recording of Steely Dan's "Do It Again", but the vinyl never sounded as good as this flac i am hearing now
[21:07:55] <katsmeow> who knew all i had to do was wait 45 years to really listen to it?
[21:08:03] <katsmeow> bearing ran a lil rough ==>>
http://DesignerThinking.com/images/DSCF7104m.jpg
[21:08:11] <katsmeow> small but heavy truss ==>>
http://DesignerThinking.com/images/DSCF7106m.jpg
[21:08:15] <katsmeow> small but heavy truss ==>>
http://DesignerThinking.com/images/DSCF7110m.jpg
[21:11:01] <katsmeow> <cough>
[21:23:20] <Tom_itx> that bearing looks like crap
[21:23:26] <Tom_itx> the rest looks quite sturdy
[22:03:44] <katsmeow-afk> the outer race is quite pitted, very tiny pits, prolly from the impact of the bits off the inner race
[22:04:15] <katsmeow-afk> i was expecting to see fractures, but didn't see any onthe outer race
[22:04:25] <katsmeow-afk> the other side of the inner race looks fine too
[22:05:29] <katsmeow-afk> In response to recent minimum wage hikes, Wendy’s is now replacing fast food workers with robots.
[22:05:35] <katsmeow-afk> The fast food chain announced it will start automating all of its restaurants by installing self-serve kiosks in 6,000 locations by the end of the year.
[22:05:44] <katsmeow-afk> Although McDonalds has already been experimenting with kiosks, Wendy’s announcement is the largest roll-out to date and will likely spark a trend leading to fully robotic restaurants.
[22:05:53] <katsmeow-afk> the real revolution i am worred about is what do you do with 350 million unemployed morons in this country, when they cannot buy anything made in this country?
[22:06:01] <katsmeow-afk> robots making burgers that no one can afford
[22:06:06] <katsmeow-afk> even the robot repair techs will be out of a job
[22:07:32] <katsmeow-afk> http://futurism.com/artificially-intelligent-lawyer-ross-hired-first-official-law-firm/
[22:07:56] <katsmeow-afk> Law firm Baker & Hostetler has announced that they are employing IBM’s AI Ross to handle their bankruptcy practice, which at the moment consists of nearly 50 lawyers. According to CEO and co-founder Andrew Arruda, other firms have also signed licenses with Ross, and they will also be making announcements shortly.
[22:08:28] <katsmeow-afk> Ross, "the world's first artificially intelligent attorney" built on IBM's cognitive computer Watson, was designed to read and understand language, postulate hypotheses when asked questions, research, and then generate responses (along with references and citations) to back up its conclusions.
[22:18:54] <katsmeow-afk> so if the front panel is too small for knobs and banananananananana jacks, eliminate the jacks, put in a dunut and permananetly wire in 2ft cables
[23:14:18] <katsmeow-afk> so a switched-capacitor Volt convertor, to make +/- 40v from 120vac?
