Back
[00:29:07] <katsmeow> if a module of mobo ram is allocated 12watts of power, and it's all 5v, then 44 modules will consume 528 watts, or 105 amps @ 5vdc
[00:29:34] * katsmeow picks her jaw up out of the relish
[00:43:59] <rue_shop3> HMMM
[00:44:14] <rue_shop3> cant be 12w
[00:44:17] <rue_shop3> they would burn up
[00:44:29] <katsmeow> what are they?
[00:44:47] <rue_shop3> dunno
[00:44:55] <katsmeow> ok
[00:44:58] <rue_shop3> what are the specs on the chips?
[00:45:14] <rue_shop3> must have some sort of consumption numbers
[00:45:17] <katsmeow> 512MB ddr2 mobo ram
[00:45:23] <katsmeow> don't saqy
[00:45:24] <rue_shop3> what is the chip?
[00:45:34] <katsmeow> i am too tired to read them
[00:45:39] <rue_shop3> km44c1000bj-8?
[00:46:24] <katsmeow> i really don;t wanna go get them and get back to keybd all in one tonite
[00:46:45] <katsmeow> yo say lok up the chips and x8 them, gotcha
[00:46:55] * rue_shop3 nods
[00:46:59] <katsmeow> will still vary based on use
[00:47:13] <rue_shop3> they have a pretty narrow operation freq
[00:47:32] <rue_shop3> so the power consumption must lie between two numbers that aren't far apart
[00:48:23] <katsmeow> errr, canoot clock them at whatever they demand, and then read or write them as often as i demand?
[00:48:52] <katsmeow> anyhoo, it's a lot of amperage
[00:49:18] <katsmeow> i have hdd that say 1.5amp @ 5v AND 1.5amp @12v , they run *hot*
[00:50:11] <rue_shop3> FILL THEM WITH HELIUM
[00:50:14] <rue_shop3> sorry,
[00:50:23] <rue_shop3> cnc programming is easier with caps on
[00:50:50] <rue_shop3> SO FAR i'V REWRITTEN 1 segment with a leadin/leadout
[00:50:59] <rue_shop3> I really need to write a cad program for this
[00:51:39] <katsmeow> i really need t got bed
[00:53:01] <rue_shop3> i'll make them without the leadin/leadout, it'll take me days at this rate to recode the cnc program
[09:04:41] <Tom_itx> i could do it for you in minutes
[09:06:10] <Tom_itx> you could get so much more done if you would just succome to modern day tools
[13:22:24] * any73585131 sets some urls on the table for rue
[13:22:41] <any73585131> javascript:void(0)
[13:22:47] <any73585131> javascript:void(0)
[13:22:49] <any73585131> and
[13:22:54] <any73585131> javascript:void(0)
[13:23:01] <any73585131> :-/
[13:23:11] <any73585131> gotta luv scripts :-|
[13:23:39] <any73585131> http://www.ebay.com/itm/36-FAIRCHILD-74F374PC-IC-20-DIP-FLIP-FLOP-OCTAL-D-TYPE-NEW-/140708346499
[13:24:03] <any73585131> those are dips
[13:25:24] <any73585131> http://www.ebay.com/itm/40-IDT-74FCT543ATSO-IC-TRANSCVER-8BIT-NON-INV-24SOIC-New-ICs-/111352525853
[13:25:32] <any73585131> those are soic, not tssop
[13:27:53] <any73585131> that is all
[15:35:02] <rue_shop3> whats 543?
[16:22:24] <Tom_itx> a number over 500
[19:44:03] * katsmeow lays a cardboard with cutouts on the floor, and fills in the spaces with M&Ms
[19:45:25] <katsmeow> ye garps! english wikipedia, with no pics or history or discussion is now 52GB
[19:45:58] <ye_garps> hm
[19:46:04] <katsmeow> ye garps! english wikipedia, with no pics or history or discussion is now 52GB
[19:46:10] <ye_garps> oh, ok, thanks
[19:49:01] <rue_house> *blink*
[19:49:44] * katsmeow looks at rue
[19:51:17] <rue_house> I have a package at the village store and I'm gonna go get it!
[19:52:36] <katsmeow> do travel carefully!
[20:41:42] <katsmeow> ooooooh, click IN THE FOLDER , not ON the folder
[20:42:00] <katsmeow> every human has said to click ON the finfolder
[20:49:09] <katsmeow> like Star Wars? open a dos window, type: telnet towel.blinkenlights.nl
[20:52:48] <katsmeow> http://www.asciimation.co.nz
[20:59:17] <katsmeow> i need a new key, the won't type
[21:33:26] <katsmeow> WHAT
[21:34:38] <rue_house> wont key?
[21:34:57] <rue_house> heh, seen the ascii star wars
[21:35:59] <katsmeow> the key, the one between the y and i
[21:38:16] * katsmeow ponders buying food from Canadia once the min wage hits $10 (by new laws) in usa, and food prices double
[21:46:07] <rue_house> its only 10!?
[21:46:45] <katsmeow> it isn't yet
[21:47:12] <katsmeow> imo, the wage isn't the problem, the rent etc is
[21:49:20] * rue_house works on seeing if he can get the 3rd monitor of his computer going
[21:49:42] <katsmeow> NO!!
[21:49:53] <katsmeow> last time you mentoned that monitr, you were offline
[21:50:35] <rue_house> thats cause a tree fell down the street and broke off the power pole
[21:51:15] <rue_house> which was co-inncodently accomodated, by all things, by a power outage
[21:51:42] <katsmeow> that's rare
[21:51:57] <rue_house> yea go figure eh?
[21:52:20] <katsmeow> and none of you was on the ups, even tho that was the topic of discussion at the time
[21:52:43] <katsmeow> pole broke, and !blam! you were gone
[21:52:57] <rue_house> the ups that runs the fiber modem died a long time ago during a non-power fail event
[21:53:10] <rue_house> someone got annoyed and replaced it with a power bar
[21:53:10] <katsmeow> o
[22:15:56] <rue_house> I wonder if I should try it now or go play in the shop and let supper burn
[22:15:58] <rue_house> wait
[22:15:58] <rue_house> hmm
[22:16:06] <rue_house> maybe I'll play with it now
[22:16:10] <rue_house> bbl
[22:17:56] <katsmeow> i swear it's much easier to not burn pasta in a nukebox
[22:19:31] <katsmeow> "if i hold my hands like this, i can see the earth thru them!"
[22:38:25] <Tom_itx> damn, i can't get the code schemes to work in PN
[22:38:42] <Tom_itx> i don't know how they attach the files to the program
[22:38:50] <Tom_itx> (programmer's notepad)
[22:39:24] <Tom_itx> i guess until i figure it out, i'll use pascal template
[22:44:42] * katsmeow nods like she has a clue
[22:48:47] <Tom_itx> how can you specify a drive in a bat file if the drive could change?
[22:48:52] <Tom_itx> ie i want the current drive
[22:50:03] <katsmeow> use dir
[22:50:11] <Tom_itx> huh?
[22:50:16] <Tom_itx> as in a path setting
[22:50:31] <katsmeow> in the bat file, dir will return the entire path, INCLUDING THE DRIVE
[22:52:37] <katsmeow> Tom, see?
[22:52:52] <Tom_itx> not entirely
[22:53:04] * katsmeow opens a dos window
[22:54:12] <Tom_itx> well, i'm trying to run something from a thumb drive and i'm not sure it will work anyway
[22:54:17] <katsmeow> dir 777777
[22:54:17] <katsmeow> Volume in drive C has no label.
[22:54:17] <katsmeow> blahblahblah
[22:54:17] <katsmeow> Directory of C:\IRC_EU
[22:54:17] <katsmeow> File Not Found
[22:54:47] <katsmeow> there is no file named 77777 , but i used that to make a super short dir list
[22:55:16] <katsmeow> if i had opened that on d:\ somewhere, then the dir wold have returned the d:pathetc
[22:56:56] <katsmeow> try chdir
[22:57:10] <katsmeow> no parameters, just chdir
[22:57:27] <katsmeow> or a redirector, like chdir > blah.txt
[22:58:20] <Tom_itx> i could use %1 and pass it on the cmd line
[22:58:37] <katsmeow> or CD
[22:59:01] <Tom_itx> apparently it will compile.. just tried it
[22:59:12] <Tom_itx> but i don't know if it will work on a 64bit machine
[22:59:25] <katsmeow> a compiled bat file?
[22:59:30] <Tom_itx> no
[22:59:36] <Tom_itx> the project i'm working no
[22:59:38] <Tom_itx> on
[22:59:46] <katsmeow> ha
[22:59:47] <katsmeow> ah
[23:00:15] <Tom_itx> adding some code to an old dos program i use
[23:00:20] <rue_house> brb
[23:00:31] <katsmeow> ok, that's 3 dos commands for finding the drive leter of the thumbdrive: CD , CHDIR , and DIR
[23:01:05] <Tom_itx> i don't need to find it i just don't know what it will be on the target machine yet
[23:02:43] <katsmeow> ok, i just gave you a way to find out
[23:02:50] <Tom_itx> thank you
[23:03:15] <katsmeow> so the code won't care what it will be on the machine, it cold be d: or q:
[23:16:32] <rue_house> well, no 3 monitors today
[23:16:43] <rue_house> looks like I need to adjust my custom kernel
[23:16:45] <rue_house> :)
[23:18:26] <rue_house> (EE) Screen 2 deleted because of no matching config section.
[23:18:29] <rue_house> but I got close