#garfield Logs
Dec 20 2015
#garfield Calendar
00:32 rue_house I'm back from christmas party
00:33 rue_house I didn't win the christmas tree with $1000 on it, but I got some wire strippers and a tick tester
00:34 rue_house yesterday I finished writing my appology and had it sent off today to the other person I upset
00:35 ^kat^ had it sent off?
00:39 at^ looks confused about the appology t
00:42 ^kat^ ..
01:05 rue_house your not the only one I'v ever upset!
08:31 Tom_itx forced apology isn't a good thing
08:31 Tom_itx had recent encounter with that
08:33 Tom_itx aplogizer and recipient should have been reversed
08:33 Tom_itx boss was protecting
08:33 Tom_itx apologizer quit
08:33 Tom_itx was asked to come back in a lesser position
08:34 Tom_itx horrible manager
08:34 Tom_itx none of this was me
16:01 ^kat^ .
16:02 ^kat^ http://www.ebay.com/itm/cnc-l-type-4th-axis-router-rotational-rotary-a-axis-3-jaw-80mm-chuck/252082452998
16:04 ^kat^ http://www.ebay.com/itm/3040-CNC-L-type-4th-Axis-Router-Rotational-Rotary-A-Axis-Tailstock-Engraving/271526566907 <<== so small, the tailstock is larger than the headstock WITH the motor attached
16:06 ^kat^ http://www.ebay.com/itm/hollow-shaft-4axis-rotary-axis-4th-axis-A-axis-for-cnc-router-100mm-chuck/221272369854
16:07 ^kat^ NOTE: For the countries that we do not ship to, please contact us about shipping fee.
16:15 rue_shop3 wow good deal
16:16 ^kat^ http://www.ebay.com/itm/4th-Axis-Router-Rotational-Axis-3-Chuck-w-TailStock-for-CNC-Engraving-Machine/311435819244 <<== one pic of the actual machine shows a pass-thru head, the next pic of the actual machines shows it is not a pass-thru head,, good luck!
16:19 ^kat^ it all shows even the Chinese like my idea of an indexing lathe chuck under a power tool that removes the stock
16:21 ^kat^ http://www.ebay.com/itm/Hollow-Shaft-Router-4th-Axis-A-Axis-ER32-Collet-Set-3-20mm-CNC-Engraving-Machine/151842258892 <<== big enough to put those small lathe chucks into
16:25 ^kat^ http://www.ebay.com/itm/5M-405-Timing-Synchronous-Pulley-Belt-Set-Reducer-Ratio-4-1-CNC-Carving-Machine-/251928704864 <<== i wish i could find an affordable this, in the bore sizes i need (such as 32mm on the big pulley)
16:33 at^ resorts to http://DesignerThinking.com/images/DSCF6893m.jpg and http://DesignerThinking.com/images/DSCF6894m.jpg
17:02 rue_shop3 lots of good ebay finds
17:02 rue_shop3 whats the sprocket for
17:03 e_shop3 goes back to cleaning the house for the upcomming family p
17:38 useless-afk lathe
17:39 useless-afk 100rpm max
17:39 useless-afk ~12:1 chain ratio from 24v scooter motor
17:40 useless-afk drive the mill spindle with no pulley at all, using flat vac cleaner belt, because it's what i can find
17:42 useless-afk possibly, i can make everything else i don't have with the chain-drive lathe and jury-rigged mill and electric die grinder
17:43 useless-afk put bearings on mill spindle, drop into pipe that's 1mm too big, pour epoxy between bearings and ID of pipe, hammer in a few shims cut from tin cans
17:45 useless-afk baby mill spindle is ER16 with 20mm OD hollow shaft, good for 1mm - 3/8" collets, and got to be 5x more durable than my baby drill press, which it will replace
17:46 useless-afk i am sooooooooo tired of seeing bits wallowing around and getting non-round holes, and not where i center punched them
17:47 useless-afk http://www.ebay.com/itm/281469913706
17:48 eless-afk h
17:50 useless-afk china makes 20mm pillow block bearings
17:53 useless-afk RUE, remember to show your 2013 purchase page(s) on ebay and save the page, because sometime week after xmas ebay will delete your 2013 purchase pages
18:02 eless-afk looks at
18:21 useless-afk i been waiting 30 minutes on pasta to be cooked, and it's still crunchy hard raw
18:36 useless-afk 33/66"-31/64" Clamping Range Spring Collet Chuck
19:12 useless-afk http://www.ebay.com/itm/ER25-Collet-chuck-tool-holde-extention-150mmL-x-1-1-4-straight-shank-/272067456485 $50
19:12 useless-afk http://www.ebay.com/itm/ER25-1-1-4-Collet-Chuck-/161910470986 $100
19:14 useless-afk 32mm dia new with wrench is $50 or less
19:20 useless-afk 32mm = 1.25984"
20:20 eless-afk yells some obscenities at her feets to make them beh
20:21 useless-afk it works as well as anything else :-/
20:44 eless-afk thinks abstruse is difficult to underst
23:09 useless-afk there is actually a https://swimsuit.moe/
23:31 rue_bed ok family non-christmas party over!
23:32 rue_bed house looks spotless, more or less
23:35 useless-afk the robots were helpful ?
23:53 rue_bed I was cleaning up all day
23:54 useless-afk oh
23:58 rue_bed kat, I'm starting to try to not use ebay anymore, their system is just too borken
23:59 useless-afk i have not noticed anything borken, what's borked?