#linuxcnc Logs

Jun 02 2021

01:24 AM randy: monring.
01:24 AM randy: gna. morning.
01:24 AM XXCoder: coffee!
01:24 AM XXCoder: uhh xthx isnt in
01:25 AM XXCoder: xthx: coffee!
01:25 AM XXCoder: xthx: status?
01:25 AM XXCoder: think somethings broken
01:27 AM XXCoder: xthx: status?
01:28 AM XXCoder: xthx: status?
02:26 AM XXCoder: yo
12:40 PM Vq: jepler: Nice that it's official, #linuxcnc is the last channel that I'm in to move.
02:16 PM Guest34 is now known as CaptHindsight
02:21 PM selroc: hello
02:21 PM aaroncnc: hello
02:25 PM Vq: Good evening
02:25 PM selroc: one question: how do I connect with ipv6? already attempted on irc.ipv6.libera.chat but it refused connection
02:27 PM CaptHindsight: OT: test
02:29 PM Vq: selroc: That's what it says to use on the webpage.
02:29 PM Vq: I'm not on IPv6 so I can't try it unfortunately.
02:30 PM selroc: I will retest now
02:32 PM selroc: well it refuses connection on ipv6
02:34 PM Vq: It seems like pcw_home and alkabal earlier connected via IPv6.
03:06 PM CaptHindsight: https://forum.linuxcnc.org/38-general-linuxcnc-questions/42008-ros-linuxcnc-link?start=110#210467 anyone try this out yet?
04:22 PM JT-Shop: guy in au keeps demanding a refund on the priority shipping... sorry I don't guarantee the United States Postal Service delivery times and comparing the usps to ups and fedex is not the same as the latter two have their own fleet of planes and don't depend on commercial traffic
04:24 PM CaptHindsight: not your fault if USPS gets delayed
04:25 PM JT-Shop: now that I know they have major issues I don't ship anything overseas with them
04:26 PM JT-Shop: worst part you can't get the package returned, an intercept only works with domestic mail
04:28 PM CaptHindsight: i told customers that it could be months
04:29 PM CaptHindsight: I stopped offering USPS to a few countries before the pandemic just due to which local postal service it got handed off to
04:30 PM CaptHindsight: USPS priority and express would be handled by different local services
04:39 PM JT-Shop: I stopped shipping to most countries when the pandemic hit
04:40 PM JT-Shop: I stopped shipping to England due to their new law making me responsible for collecting VAT and paying it... that's just not going to happen
04:42 PM JT-Shop: hmmm usps tracking is currently unavailable
05:02 PM ve7it: goodday from the dark side.... its been a long time since I configured my irc client... heres hoping!
05:05 PM robotustra: JT-Shop, do you produce mesa bords?
05:10 PM JT-Shop: no
05:12 PM XXCoder: JT-Shop: really on english? dang
05:12 PM XXCoder: glad i dont have a store for quite a while now lol
05:14 PM robotustra: I would like to have small production and a shop
05:24 PM _unreal_: started my print
05:24 PM _unreal_: I reduced this down 46% and printing :) https://www.thingiverse.com/thing:4546965
05:25 PM _unreal_: it fits my printer AND its the right size for my vacuum :)
05:25 PM _unreal_: will be interesting if it works out LOL
05:26 PM robotustra: two buckets and a pipe works just fine as a cyclone
05:26 PM robotustra: it will, why not
05:27 PM _unreal_: going to use it for my cnc machine
05:27 PM _unreal_: I have a really small vacuum
05:28 PM _unreal_: I get this setup I can get way better run time
05:28 PM robotustra: like 24 h per day?
05:29 PM _unreal_: haaa hardly
05:29 PM _unreal_: run time with my vacuum
05:30 PM robotustra: vacuum will die faster
05:33 PM robotustra: _unreal_, the next thing you will need to print is this: https://www.youtube.com/watch?v=LBxFNUWD2GQ
05:33 PM robotustra: after your vacuum die
05:37 PM _unreal_: hum
05:38 PM _unreal_: heh I own a delta shop dust c ollector
05:38 PM _unreal_: $600 machine
05:38 PM _unreal_: for this is for my small desktop mill
05:38 PM _unreal_: small quite
05:41 PM JT-Shop: robotustra, p&k w make mesa boards
05:47 PM JT-Shop: XXCoder, yea I don't ship to england any more
05:48 PM JT-Shop: also don't use usps for anything outside of north america
05:48 PM JT-Shop: don't ship to any place south of the us either
05:51 PM XXCoder: funny that english is losing money
05:52 PM JT-Shop: I think they dropped or are dropping out of the EU
05:53 PM JT-Shop: they can collect their own taxes lol
05:54 PM _unreal_: damn no one has designed a Centrifugal Dust Separator
05:54 PM _unreal_: sigh
05:55 PM XXCoder: already left yeah
06:02 PM JT-Shop: replacement servo is on the way for the bp
06:14 PM _unreal_: ?
06:14 PM _unreal_: bp?
06:16 PM _unreal_: 4.5 hour print WOW longest one i've done so far
06:16 PM _unreal_: only 10% done
06:16 PM _unreal_: sigh
06:31 PM XXCoder: just 3d printed a kant twist clamp
06:31 PM XXCoder: pretty cool lol
06:33 PM XXCoder: https://youtu.be/6HK3FoZJUqs not my video
06:35 PM _unreal_: nifty
08:01 PM snakedLX is now known as snaked
11:30 PM XXCoder: https://media.discordapp.net/attachments/343070336084082708/849864190042046494/166938342_3768956679995593_333644330449940604_n.png
11:30 PM XXCoder: hey Tom_L
11:30 PM XXCoder: whats up
11:54 PM JavaBean: got offensive spambots hitting in another channel, i don't know they they will make it this far, but might wanna go +s heilds up for a bit
11:55 PM XXCoder: yeah? not sure if I can set +s as im not founder anymore
11:56 PM XXCoder: JavaBean: you know command to set +s?
11:58 PM JavaBean: it seems it is +r for this. /mode #linuxcnc +r
11:58 PM XXCoder: registered only?
11:58 PM XXCoder: im not sure if everyone here is registered yet.
11:59 PM XXCoder: ill wait till we gets hit with spambot before trying it
11:59 PM JavaBean: gah, where did i get +s from?