tom@bookworm:~/linuxcnc/configs/touch-probe3sim$ linuxcnc touch-probe3.ini
LINUXCNC - 2.9.4
Machine configuration directory is '/home/tom/linuxcnc/configs/touch-probe3sim'
Machine configuration file is 'touch-probe3.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Found file(REL): ./sim.hal
can't resolve path to './toplevel.py'
Interp ctor: can't instantiate Python plugin
can't resolve path to './toplevel.py'
Python plugin configure() failed, status = -5
default view button not found
/usr/lib/libflexgui/tpc.jpg
task: main loop took 0.100245 seconds
EXEC STATE: EXEC_WAITING_FOR_MOTION_AND_IO
STATE: RCS_EXEC
TASK STATE: STATE_ESTOP_RESET
EXEC STATE: EXEC_DONE
STATE: RCS_DONE
TASK STATE: STATE_ON
STATE: RCS_EXEC
STATE: RCS_DONE
MOTION MODE: TRAJ_MODE_TELEOP
MOTION MODE: TRAJ_MODE_COORD
MOTION TYPE: MOTION_TYPE_TRAVERSE
INTERP STATE: INTERP_READING
TASK MODE: MODE_MDI
STATE: RCS_EXEC
MOTION TYPE: MOTION_TYPE_NONE
INTERP STATE: INTERP_IDLE
STATE: RCS_DONE
MOTION MODE: TRAJ_MODE_TELEOP
TASK MODE: MODE_MANUAL
MOTION MODE: TRAJ_MODE_COORD
MOTION TYPE: MOTION_TYPE_TRAVERSE
INTERP STATE: INTERP_READING
TASK MODE: MODE_MDI
STATE: RCS_EXEC
MOTION TYPE: MOTION_TYPE_NONE
INTERP STATE: INTERP_IDLE
STATE: RCS_DONE
MOTION MODE: TRAJ_MODE_TELEOP
TASK MODE: MODE_MANUAL
MOTION MODE: TRAJ_MODE_COORD
MOTION TYPE: MOTION_TYPE_FEED
INTERP STATE: INTERP_READING
TASK MODE: MODE_MDI
EXEC STATE: EXEC_WAITING_FOR_MOTION_AND_IO
STATE: RCS_EXEC
can't resolve path to './toplevel.py'
Python plugin configure() failed, status = -5
MOTION TYPE: MOTION_TYPE_NONE
EXEC STATE: EXEC_DONE
MOTION TYPE: MOTION_TYPE_FEED
EXEC STATE: EXEC_WAITING_FOR_MOTION_AND_IO
Interp ctor: can't instantiate Python plugin
can't resolve path to './toplevel.py'
Python plugin configure() failed, status = -5
MOTION TYPE: MOTION_TYPE_NONE
MOTION TYPE: MOTION_TYPE_PROBING
MOTION TYPE: MOTION_TYPE_NONE
MOTION TYPE: MOTION_TYPE_TRAVERSE
MOTION TYPE: MOTION_TYPE_NONE
MOTION TYPE: MOTION_TYPE_PROBING
MOTION TYPE: MOTION_TYPE_NONE
MOTION TYPE: MOTION_TYPE_FEED
Interp ctor: can't instantiate Python plugin
can't resolve path to './toplevel.py'
Python plugin configure() failed, status = -5
MOTION TYPE: MOTION_TYPE_NONE
MOTION TYPE: MOTION_TYPE_PROBING
MOTION TYPE: MOTION_TYPE_NONE
MOTION TYPE: MOTION_TYPE_TRAVERSE
MOTION TYPE: MOTION_TYPE_PROBING
MOTION TYPE: MOTION_TYPE_NONE
EXEC STATE: EXEC_DONE
MOTION TYPE: MOTION_TYPE_FEED
EXEC STATE: EXEC_WAITING_FOR_MOTION_AND_IO
MOTION TYPE: MOTION_TYPE_TRAVERSE
MOTION TYPE: MOTION_TYPE_FEED
MOTION TYPE: MOTION_TYPE_NONE
INTERP STATE: INTERP_IDLE
EXEC STATE: EXEC_DONE
STATE: RCS_DONE
MOTION MODE: TRAJ_MODE_TELEOP
TASK MODE: MODE_MANUAL
task: main loop took 0.102507 seconds
TASK STATE: STATE_ESTOP_RESET
EXEC STATE: EXEC_WAITING_FOR_MOTION_AND_IO
STATE: RCS_EXEC
TASK STATE: STATE_ESTOP
EXEC STATE: EXEC_DONE
STATE: RCS_DONE
Shutting down and cleaning up LinuxCNC...
task: 6645 cycles, min=0.000010, max=0.102507, avg=0.009906, 2 latency excursions (> 10x expected cycle time of 0.010000s)