#linuxcnc Logs

Sep 14 2025

02:21 AM lcnc-relay: <lucid.nonsense@> _unreal_: Tested cmos battery?
03:52 AM lcnc-relay: <meisterdippel@> moin
04:02 AM lcnc-relay: <pink_vampire@> Morning
04:02 AM lcnc-relay: <pink_vampire@> I am assembling another giant 3d printer
04:30 AM Tom_L: morning
04:50 AM lcnc-relay: <lucid.nonsense@> Bom dia
04:51 AM lcnc-relay: <lucid.nonsense@> pink_vampire@: Diy or off the shelf?
04:52 AM lcnc-relay: <pink_vampire@> Elegoo Neptune 4 Max
04:52 AM lcnc-relay: <lucid.nonsense@> Got my first fdm printer in 7 years yesterday, been using resin printers exclusively for a while
04:54 AM lcnc-relay: <lucid.nonsense@> pink_vampire@: Cool
04:55 AM lcnc-relay: <pink_vampire@> This is the second one I got
05:07 AM lcnc-relay: <lucid.nonsense@> Got a creality k2 plus, only run the builtin multicolour benchy test so far, but was pretty much flawless
05:19 AM lcnc-relay: <pink_vampire@> I need large print area with 0.8mm nozzle
05:19 AM lcnc-relay: <pink_vampire@> My goal is to push 50kg filament a month
05:26 AM lcnc-relay: <lucid.nonsense@> Have a 0.6mm silicon carbide nozzle arriving today so I can print this stuff https://www.amazon.co.uk/gp/aw/d/B0DS1V9RFJ
06:21 AM lcnc-relay: <vivaldi7_7_7@> anyone have a tutorial on how to set up MesaCT 7i96s and linuxCnC on ethernet?
06:24 AM JT-Cave: https://gnipsel.com/linuxcnc/mesact/index.html
07:21 AM _unreal_: lucid this p3 computer is just acting odd
07:22 AM _unreal_: its acting like it has unstable issues. like a failed or missing CAP or maybe broken trace. or maybe some plugged in hardware is failed and causing stability issues
07:22 AM _unreal_: its very strange
07:27 AM _unreal_: hell maybe the cdrom is the issue
07:28 AM _unreal_: just rebooted and its saying boot failed isolinux image checksum error
07:28 AM _unreal_: ?
07:28 AM _unreal_: and I mean the drive
07:28 AM _unreal_: could even be the IDE controller is failed and I need to put an IDE card in
07:28 AM _unreal_: havnt figured it out yet
07:38 AM t4nk_fn: why don't you just give your daughter something better than an electronic typewriter? and some dignity to 'boot' ;)
07:42 AM lcnc-relay: <lucid.nonsense@> _unreal_: Yeah, just have known a bad cmos battery to cause weird behaviour
07:43 AM lcnc-relay: <lucid.nonsense@> If it has been stood for a long time, it might be dead or near
08:02 AM _unreal_: heh cmos WAY ahead of ya
08:02 AM _unreal_: most of these computers are from my late father
08:03 AM _unreal_: working on trashing them but if you missed it. I have to go though the drives on all of them. regardless I'm working on setting up a legacy system for my daughter and I
08:03 AM _unreal_: goal being to have 2 older comps to play the older dos games
08:03 AM _unreal_: I DONT CARE about or CARE FOR dos box
08:04 AM _unreal_: used it plenty but this is showing my daughter the old hardware that I was denied the ablity to do before. NOW I'm free from evil famely and working on correcting some of the wrongs.
08:04 AM _unreal_: oh well. I think I'm going to take my daughter to pidgon key today
08:05 AM _unreal_: pidgin key
08:05 AM _unreal_: https://pigeonkey.net/
09:41 AM Deejay: hi
10:19 AM lcnc-relay: <meisterdippel@> https://www.youtube.com/shorts/KLijHrYiQXw
10:27 AM lcnc-relay: <lucid.nonsense@> meisterdippel@: Nice, congrats
10:30 AM lcnc-relay: <meisterdippel@> thnaks
10:31 AM lcnc-relay: <lucid.nonsense@> Currently trying to download the rpi5 images for the 3rd time on my backup 4g Internet because my main pipe has gone down, again
10:47 AM Tom_L: meisterdippel, lookin good
11:08 AM lcnc-relay: <lucid.nonsense@> https://i.postimg.cc/7ZrKWKyT/Wavepi.jpg success, booted before the screen had time to wake up lol
11:16 AM lcnc-relay: <lucid.nonsense@> Is the spix driver oncluded with the latest pi5 image or do I need to install it?
11:16 AM lcnc-relay: <lucid.nonsense@> * included
11:50 AM Tom_L: i think it's included
11:50 AM Tom_L: it also works on rpi4 now as well
11:50 AM Tom_L: the driver that is
11:51 AM Tom_L: i recently tested that
12:03 PM lcnc-relay: <lucid.nonsense@> Cool thanks
12:40 PM xxcoder: ugh seems I strained my left arm tendons yeserday
12:40 PM xxcoder: its sore as hell
01:12 PM -!- #linuxcnc mode set to +v by ChanServ
01:23 PM lcnc-relay: <skunkworks8841@> The printing of the shore trooper has begun..
01:23 PM lcnc-relay: <skunkworks8841@> *costume..
01:23 PM lcnc-relay: <skunkworks8841@> the helmet is fine (I printed that full size) but the rest of the costume probably needs to be re-printed
02:51 PM JT-Mobile: Yo
02:57 PM Unterhaus_ is now known as Unterhausen
04:46 PM ywolflufff is now known as fluffywolf
06:20 PM -!- #linuxcnc mode set to +v by ChanServ
06:42 PM -!- #linuxcnc mode set to +v by ChanServ
09:54 PM xxcoder: just woke up from nap
09:54 PM xxcoder: dang it was half good half bad
09:54 PM xxcoder: woke up like zombie but after a bit I feel well rested
10:24 PM Deejay: moin
11:02 PM _unreal_: lucid are you using op5 for lcnc?
11:46 PM -!- #linuxcnc mode set to +v by ChanServ
11:46 PM -!- #linuxcnc mode set to +v by ChanServ