#linuxcnc-devel Logs

Mar 28 2020

07:52 AM tjtr33: I just built a new rip on debian 9. runtests fails 13 times
07:56 AM tjtr33: https://pastebin.com/8Zf9iqDD
07:56 AM tjtr33: any siggestions?
08:21 AM CMorley: run the test and see what the output is - in my case it gave a clue to what was wrong.
08:36 AM cerna: CMorley: I think (for what it's worth) that you should just pick up soft and hard date for 2.8 release, do your best, release it and then bugfix, bugfix, bugfix. Otherwise, nothing will happen.
08:37 AM CMorley: cena: 2.8 is pretty solid. I am try to get interest in linuxcnc again and I don't actully know what is involved with releasing :)
08:39 AM CMorley: If I can figure out what to do and no one else is available i'll try to do it.
08:41 AM jthornton: I'm not sure how to release either
08:42 AM CMorley: I beleive there is old notes somewhere...
08:43 AM CMorley: mm I wonder if this is useful: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ReleaseCheckList
08:43 AM cerna: Action causes action. Your enthusiasm will pull others, I think. (Even if it is not up top.) Logically, is there anything else to release than functioning package build, ISO and change of docs?
08:44 AM cerna: By the link ( http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ReleaseCheckList ) - there pretty much isn't.
08:45 AM CMorley: There is an ISO to build but I think we should look at Rob's Mint ISOs
08:46 AM CMorley: We should sign him up as a developer
08:47 AM cerna: I think you should, everybody willing to do hard work should be approached.
08:47 AM CMorley: I think Seb has to do that.. maybe others can. our development crew is pretty broken :)
08:47 AM CMorley: I'm off to sleep ttyl
01:12 PM linuxcnc-build: build #1306 of 4031.deb-stretch-rtpreempt-amd64 is complete: Failure [4failed shell_3] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4031.deb-stretch-rtpreempt-amd64/builds/1306 blamelist: Phillip Carter <phillcarter54@gmail.com>, Jim Craig <jimcraig5615@windstream.net>, Sebastian Kuzminsky <seb@highlab.com>, Jon Elson <elson
01:12 PM linuxcnc-build: @pico-systems.com>, Dewey Garrett <dgarrett@panix.com>, Tero Kaarlela <tero.kaarlela@eka-sorvaus.fi>, Joe Hildreth <joeh@threerivershospital.com>, andypugh <andy@bodgesoc.org>, andy pugh <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, tseufl <t_seufl@gmx.de>, joseph calderon <calderon.joe@gmail.com>, Alec Ari <neotheuser@ymail.com>, John
01:12 PM linuxcnc-build: Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>, Rene Hopf <renehopf@mac.com>, Chris Radek <chris@timeguy.com>, Kim Kirwan <Kim@KimKirwan.com>, Jeff Epler <jepler@unpythonic.net>, Edward Tomasz Napierala <trasz@FreeBSD.org>, Norbert Schechner <nieson@web.de>, Andy Pugh <andypugh@localhost.localdomain>, chris morley
01:12 PM linuxcnc-build: <chrisinnanaimo@hotmail.com>, Alexander Brock <alexander@lunar-orbit.de>, Chris Edwards <cedwards@cedwards.geek.nz>
01:13 PM linuxcnc-build: build #1305 of 4030.deb-stretch-rtpreempt-i386 is complete: Failure [4failed shell_3] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4030.deb-stretch-rtpreempt-i386/builds/1305 blamelist: Phillip Carter <phillcarter54@gmail.com>, Jim Craig <jimcraig5615@windstream.net>, Sebastian Kuzminsky <seb@highlab.com>, Jon Elson <elson@pico-
01:13 PM linuxcnc-build: systems.com>, Dewey Garrett <dgarrett@panix.com>, Tero Kaarlela <tero.kaarlela@eka-sorvaus.fi>, Joe Hildreth <joeh@threerivershospital.com>, andypugh <andy@bodgesoc.org>, andy pugh <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, tseufl <t_seufl@gmx.de>, joseph calderon <calderon.joe@gmail.com>, Alec Ari <neotheuser@ymail.com>, John
01:13 PM linuxcnc-build: Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>, Rene Hopf <renehopf@mac.com>, Chris Radek <chris@timeguy.com>, Kim Kirwan <Kim@KimKirwan.com>, Jeff Epler <jepler@unpythonic.net>, Edward Tomasz Napierala <trasz@FreeBSD.org>, Norbert Schechner <nieson@web.de>, Andy Pugh <andypugh@localhost.localdomain>, chris morley
01:13 PM linuxcnc-build: <chrisinnanaimo@hotmail.com>, Alexander Brock <alexander@lunar-orbit.de>, Chris Edwards <cedwards@cedwards.geek.nz>
04:03 PM jepler: I think anyone with role:admin to the linuxcnc repository can add external developers. At this moment, the list is: andypugh, chris radek, mozmck, and seb. people with privileges at the organization level may also be able to do it, I didn't check who is on that list. Historically, we had some kind of "is everyone OK with this addition", as an informal process. I do not stand in the way of adding anyone, but I have no
04:04 PM jepler: familiarity with Rob's work.
04:04 PM jepler: me, cradek, and seb are owners at the organization level
04:06 PM andypugh: Rob is already publishing ISO files of LinuxCNC based on Mint. (Basically some on the forum are getting imapatient with the non-release of 2.8)
04:07 PM andypugh: I don’t know whether he has the experience to release 2.8, but he might have the enthusiasm.
04:08 PM andypugh: (I am only guessing what question is being answered, I only just got here)
04:08 PM jepler: Thanks for the info. I don't know if my info dump above is relevant to any of that
04:30 PM linuxcnc-build: build #6548 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/6548 blamelist: andypugh <andy@bodgesoc.org>
04:30 PM linuxcnc-build: build #6551 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/6551 blamelist: andypugh <andy@bodgesoc.org>
04:36 PM linuxcnc-build: build #5769 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/5769 blamelist: andypugh <andy@bodgesoc.org>
04:38 PM linuxcnc-build: build #4709 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/4709 blamelist: andypugh <andy@bodgesoc.org>
04:39 PM linuxcnc-build: build #4710 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/4710 blamelist: andypugh <andy@bodgesoc.org>
04:40 PM linuxcnc-build: build #3176 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/3176 blamelist: andypugh <andy@bodgesoc.org>
04:41 PM skunkworks: love the shaving...
04:41 PM skunkworks: https://youtu.be/C0Wz8vnFAQU
04:41 PM linuxcnc-build: build #172 of 1640.rip-buster-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1640.rip-buster-rtpreempt-amd64/builds/172 blamelist: andypugh <andy@bodgesoc.org>
04:42 PM linuxcnc-build: build #3176 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/3176 blamelist: andypugh <andy@bodgesoc.org>
04:42 PM linuxcnc-build: build #3178 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/3178 blamelist: andypugh <andy@bodgesoc.org>
04:42 PM linuxcnc-build: build #1566 of 1630.rip-stretch-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1630.rip-stretch-rtpreempt-amd64/builds/1566 blamelist: andypugh <andy@bodgesoc.org>
04:42 PM linuxcnc-build: build #4913 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/4913 blamelist: andypugh <andy@bodgesoc.org>
04:42 PM linuxcnc-build: build #1566 of 1610.rip-stretch-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/1566 blamelist: andypugh <andy@bodgesoc.org>
04:43 PM linuxcnc-build: build #4229 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/4229 blamelist: andypugh <andy@bodgesoc.org>
04:45 PM linuxcnc-build: build #3179 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/3179 blamelist: andypugh <andy@bodgesoc.org>
04:45 PM andypugh: .
04:45 PM andypugh: .
04:45 PM andypugh: In case anybody is wondering, this is all test-branch failures
04:45 PM andypugh: .
04:45 PM andypugh: .
04:48 PM linuxcnc-build: build #4381 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/4381 blamelist: andypugh <andy@bodgesoc.org>
04:48 PM linuxcnc-build: build #6569 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6569 blamelist: andypugh <andy@bodgesoc.org>
05:00 PM TurBoss: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
05:12 PM jthornton: what are you testing?
06:19 PM andypugh: statetags
06:20 PM jthornton: cool
06:31 PM andypugh: It fails some runtests. But I think I know why.
08:18 PM hazzy-m: andypugh: Hurray!!!
08:19 PM hazzy-m: getting any closer to merging state-tags?
08:19 PM andypugh: It was an experiment, mainly. I don’t actually know what it does in detail.
08:20 PM andypugh: But andypugh/statetags-200328 is a merge of statetags and todays master that builds and runs.
08:20 PM cradek: neat
08:20 PM andypugh: Some tests fail, but we could merge it today. If we really wanted to.
08:21 PM cradek: iirc it had known bugs...
08:21 PM andypugh: And the “we” is the problem, as LinuxCNC seems to have lost the ability to make any decisions at all.
08:22 PM andypugh: The buildbot runtests output should be there for all to see. At least some of it seems like it might be “extrajoints” related.
08:23 PM andypugh: The main obstacle to an automatic merge was “multispindle” but luckily I knew how to work that out. Mainly by cheating and only reporting tags for spindle 0.
08:24 PM hazzy-m: statetags it pretty old, so I would not be surprised if it has bugs related to multispindle etc. being merged
08:24 PM hazzy-m: oh, so you already worked on that, fantastic!
08:25 PM andypugh: Does master currently pass runtests?
08:26 PM andypugh: I think it does
08:27 PM andypugh: One thing I was seeing in runtests was motion-logger/abort aborting 16 joints.
08:50 PM andypugh: It seems that current master does not pass runtests. But in different ways to statetags-200328