#linuxcnc-devel Logs

Sep 13 2017

11:02 AM mozmck_lp: It seems like M67 is not working in 2.7.11. Has anyone else seen anything like that?
11:08 AM mozmck_lp: Hmm, now it works. Looks like I have a lot more digging to do.
11:32 AM seb_kuzminsky: mozmck_lp: did you program a motion after your m67?
11:32 AM seb_kuzminsky: http://linuxcnc.org/docs/2.7/html/gcode/m-code.html#mcode:m67
11:56 AM IchGucksLive: today i discuvered a wear thing 2.7.9 one of the PARALELL switches Homing wars broben and the Axis moved the other Direction on closed Homeswitch
11:57 AM IchGucksLive: the inductive go on if they are broken so i got a closed HS signal
11:57 AM IchGucksLive: it shoudent move at all
11:57 AM IchGucksLive: and ofcause not in the oposit direction
11:57 AM IchGucksLive: or is this for savty realon
11:58 AM IchGucksLive: as it has been the Y axis it did take ma quite a while to get things together what happend
11:59 AM jepler: I think what you are describing is behavior by design
11:59 AM jepler: > If HOME_SEARCH_VEL is non-zero, then LinuxCNC assumes that there is a home switch. It begins by checking whether the home switch is already tripped. If tripped it backs off the switch at HOME_SEARCH_VEL. The direction of the back-off is opposite the sign of HOME_SEARCH_VEL.
11:59 AM jepler: http://linuxcnc.org/docs/2.7/html/config/ini-homing.html#_home_search_vel
12:00 PM IchGucksLive: jepler: that is true
12:00 PM IchGucksLive: everything is ok on that
12:00 PM mozmck_lp: seb_kuzminsky: yes I had the motion after the M67. I figured out my problem - just another self inflicted wound!
12:00 PM IchGucksLive: but i expected a MSG
12:01 PM seb_kuzminsky: mozmck_lp: best kind of wound!
12:02 PM IchGucksLive: IF someone got contact on Cmorley woudt be good if he woudt be able to make a pnconf 7i92 setup
12:02 PM jepler: no.
12:03 PM jepler: last time I recommended that you file a github issue about pncconf and 7i92, and that is still my advice
12:03 PM IchGucksLive: what github
12:03 PM jepler: https://github.com/linxucnc/linuxcnc
12:04 PM IchGucksLive: github is unreatchable
12:04 PM jepler: well there's a trivial typo in that URL because I was in a hurry to type it
12:04 PM jepler: perhaps you can make a guess and fix it
12:04 PM jepler: afk
12:05 PM IchGucksLive: https://github.com/LinuxCNC/linuxcnc
12:41 PM linuxcnc-build: build #313 of 1540.rip-jessie-armhf is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1540.rip-jessie-armhf/builds/313 blamelist: Jeff Epler <jepler@unpythonic.net>, Ruoxi Wang <thuwrx10@gmail.com>
12:41 PM linuxcnc-build: build #5129 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/5129 blamelist: Jeff Epler <jepler@unpythonic.net>, Ruoxi Wang <thuwrx10@gmail.com>