#linuxcnc-devel Logs

Jul 17 2017

12:07 AM KGB-linuxcnc: 05kimk/configure 76ef369 06linuxcnc 04. branch deleted * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=76ef369
12:13 AM cradek: seb_kuzminsky: I can do a manual push
12:13 AM cradek: looks like it does it every 12 minutes
12:18 AM linuxcnc-build_: build #5038 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/5038 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:20 AM linuxcnc-build_: build #5036 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/5036 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:20 AM linuxcnc-build_: build #5036 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/5036 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:21 AM linuxcnc-build_: build #3197 of 1403.rip-wheezy-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/3197 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:22 AM linuxcnc-build_: build #5035 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/5035 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:23 AM seb_kuzminsky: cradek: thanks
12:24 AM seb_kuzminsky: those test failures are expected, i added a test for part of #240
12:24 AM seb_kuzminsky: good night
12:25 AM linuxcnc-build_: build #1663 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/1663 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:25 AM seb_kuzminsky: cradek: i closed the hole in my firewall for the buildbot, so that part of your post-receive hook should start failing now
12:25 AM seb_kuzminsky: goodnight again
12:26 AM linuxcnc-build_: build #2712 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/2712 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:27 AM cradek: dangit, I missed it all
12:27 AM linuxcnc-build_: build #4247 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/4247 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:28 AM linuxcnc-build_: build #3196 of 1400.rip-wheezy-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/3196 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:29 AM linuxcnc-build_: build #1663 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/1663 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:29 AM linuxcnc-build_: build #1664 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/1664 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:31 AM cradek: I turned off the buidlbot part of post-receive, and turned off the --mirror push
12:31 AM linuxcnc-build_: build #3398 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/3398 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:32 AM linuxcnc-build_: build #1665 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/1665 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:32 AM linuxcnc-build_: build #51 of 1630.rip-stretch-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1630.rip-stretch-rtpreempt-amd64/builds/51 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:34 AM linuxcnc-build_: build #2863 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/2863 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:35 AM linuxcnc-build_: build #51 of 1610.rip-stretch-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/51 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:37 AM linuxcnc-build_: build #5049 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/5049 blamelist: Sebastian Kuzminsky <seb@highlab.com>
12:38 AM cradek: thanks for your service, kgb-bot. We don't know whether or not you will dream.
12:45 AM cradek: hope I did the right things. sorry I was late.
12:48 AM cradek: hm I wonder if I should disallow new pushes
12:49 AM cradek: I don't see an announcement on the list so I bet the answer is no
12:51 AM linuxcnc-build_: build #3206 of 1405.rip-wheezy-armhf is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/3206 blamelist: Sebastian Kuzminsky <seb@highlab.com>
07:35 AM jepler: cradek: no, not yet
07:36 AM jepler: cradek: you should resume the mirror until after pushes are turned off, we're not pushing to github yet (I don't think)
07:39 AM jepler: I tried yet again to make our github IRC bot announce commits
07:39 AM jepler: I apparently used the wrong name last time
07:40 AM jepler: $ echo '{"active": true, "add_events": ["push"]}' | octohub --input - PATCH /repos/linuxcnc/linuxcnc/hooks/6860530
07:40 AM jepler: $ octohub GET /repos/linuxcnc/linuxcnc/hooks/6860530 | jq -c '.events'
07:40 AM jepler: ["issues","issue_comment","ping","pull_request","push"]
08:45 AM cradek: mirror is back on
10:27 AM skunkworks: exciting times!
10:33 AM skunkworks: I think the TP in its current iteration has been a big success.. I don't know of any big outstanding bugs. Rob has a threading branch he would like to merge - but other than that/
11:00 AM seb_kuzminsky: skunkworks: i'm not sure if the state tags branch is being worked on, but it would be nice to get that into 3.0/2.8 too
11:00 AM seb_kuzminsky: it's ultimately up to mozmck of course
11:01 AM skunkworks: seb_kuzminsky, yes. I can think of a few things that i am interested in.
11:01 AM skunkworks: state tags, reverse run, robs threading fixes.
11:02 AM skunkworks: I don't know where state tags was left.
11:06 AM skunkworks: mabye the stuff that m99 stuff that zultron did
11:06 AM skunkworks: (that is a big standard that I have used on fanucs and such.)
11:08 AM skunkworks: (I have to say - I have done work for tormach - for full disclosure..) But I think these are nice improvements to linuxcnc.
11:12 AM seb_kuzminsky: i agree those are all good improvements, and i think it doesn't detract at all from their value that they were developed by people working for tormach
11:33 AM cradek: wait is state-tags waiting for something from one of us? I thought it was waiting on zultron
11:34 AM seb_kuzminsky: i dont know :-/
11:34 AM cradek: https://github.com/LinuxCNC/linuxcnc/issues/134
11:35 AM cradek: there's a huge PR but I don't think it fixes that bug
11:35 AM cradek: I don't understand why there are 250+ commits in https://github.com/LinuxCNC/linuxcnc/pull/283
11:36 AM cradek: looks like zultron's fixes are 3 commits
11:36 AM cradek: is this just me not understanding github?
11:36 AM jepler: #283 merges master branch into the topic branch
11:36 AM seb_kuzminsky: oh no
11:37 AM jepler: or something
11:38 AM jepler: or maybe it would show that if zultron:statetags-lcnc was rebased onto our master branch?
11:39 AM jepler: anyway it's a workflow that doesn't make sense to github, that much I can tell you for nothing
11:53 AM seb_kuzminsky: no, if you rebase a PR, github still only shows the commits from the destination branch to the PR branch
11:54 AM jepler: if he rebased zultron:statetags-lcnc onto linuxcnc:master, and then requested it to be merged to LinuxCNC:statetags...
11:57 AM seb_kuzminsky: oh, right, the destination branch is LinuxCNC/statetags
11:57 AM seb_kuzminsky: that's weird
12:00 PM cradek: I suppose this calls for a heavy application of don't use github, just get those three commits and put them somewhere nice
04:31 PM skunkworks_: so - what is a good calculator for xfce?
04:31 PM seb_kuzminsky: python
04:31 PM cradek: the hp in the middle desk drawer under the keyboard
04:31 PM skunkworks_: seb_kuzminsky, no
04:32 PM skunkworks_: ugh
04:32 PM skunkworks_: I don't always have a calculator with me...
04:32 PM skunkworks_: :)
04:32 PM jepler: units
04:33 PM cradek: when I have to use a computer, I think orpie is the best I've seen
04:34 PM cradek: for just arithmetic I use dc
04:35 PM jepler: "free42-nologo"
04:35 PM cradek: none of these answers are useful if you expect to have a non-rpn thing with buttons you press with the mouse
04:35 PM cradek: (which ..... I just can't imagine wanting)
04:35 PM seb_kuzminsky: maybe if you have a touch screen?
04:36 PM cradek: mayyybe
04:36 PM skunkworks_: jepler, That will work :)
04:40 PM jepler: galculator seems OK too
04:45 PM jepler: looks like xcalc should have been installed already..
04:45 PM jepler: but has no corresponding menu entry
05:05 PM jepler: skunkworks_: if you think galculator is OK I can add it to the base image
05:05 PM jepler: it's too bad xcalc is there but has no menu entry
05:05 PM jepler: probably free42 is not so great since it's RPN
05:19 PM skunkworks_: jepler, galculator would be great. that is one thing the wheezy iso was missing - calculator
05:20 PM skunkworks_: yah - I don't think rpn is a good idea
05:22 PM skunkworks_: if you try to apt-get install xcalc it tells you it
05:22 PM skunkworks_: This may mean that the package is missing, has been obsoleted, or
05:22 PM skunkworks_: is only available from another source
05:44 PM linuxcnc-build_: build #240 of 1540.rip-jessie-armhf is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1540.rip-jessie-armhf/builds/240 blamelist: Sebastian Kuzminsky <seb@highlab.com>
05:44 PM linuxcnc-build_: build #5055 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/5055 blamelist: Sebastian Kuzminsky <seb@highlab.com>
05:45 PM seb_kuzminsky: really, jessie-armhf failed? i would never have guessed
05:49 PM seb_kuzminsky: oh, wait, that was supposed to fail
05:49 PM seb_kuzminsky: that was the branch where i added the limit3 test that reproduces #240
05:49 PM seb_kuzminsky: i take it all back
05:50 PM seb_kuzminsky: jessie-armhf, can you ever forgive me??
06:12 PM seb_kuzminsky: cradek: would you mind increasing the glo-to-github push frequency, until the switch-over happens?
06:19 PM cradek: more than every 12 minutes?
06:19 PM cradek: heh linuxcnc.git is 12 minutes and hostmot2-firmware.git is 13 minutes
06:19 PM seb_kuzminsky: i need instant gratification!
06:19 PM cradek: I changed it to 4
06:19 PM seb_kuzminsky: ok i'll settle for that
06:19 PM seb_kuzminsky: thanks :-)
06:20 PM cradek: it probably doesn't matter as long as they don't overlap
06:20 PM cradek: a do-nothing push can't be very big
06:20 PM seb_kuzminsky: just sending the list of refs and their shas, i'd guess
06:41 PM linuxcnc-build_: build #241 of 1540.rip-jessie-armhf is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1540.rip-jessie-armhf/builds/241 blamelist: Norbert Schechner <nieson@web.de>
06:41 PM linuxcnc-build_: build #5056 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/5056 blamelist: Norbert Schechner <nieson@web.de>
06:49 PM seb_kuzminsky: grr, but that one was not supposed to fail
06:49 PM seb_kuzminsky: USRMOT: ERROR: command timeout
06:49 PM seb_kuzminsky: emcTaskIssueCommand() returning: -2
06:49 PM seb_kuzminsky: task: main loop took 4.000843 seconds
07:42 PM jepler: that's a bit too long for comfort!
07:52 PM jepler: cradek: it looks like we don't control the from address on github e-mails, except if we want to set it to the committer, which isn't what we want either. can you dig out or dust off that sf mailman admin password?
07:52 PM jepler: I'll find out what github sends e-mails as for sure
07:59 PM jepler: it's like a revert war
08:02 PM seb_kuzminsky: the war against the machines
08:02 PM jepler: anyway the e-mails appear not to show the content of the change, but they do show the paths touched and the log message so it's better than nothing
08:03 PM jepler: cradek: the e-mail address you need to whitelist to send to -commit is: From: GitHub <noreply@github.com>
08:03 PM jepler: I can also include any text you like in an approved: header, if that is helpful on the mailhub end..
08:03 PM andypugh: Not done the comversion script work yet, but it is very close to the top of my list.
08:06 PM jepler: andypugh: which conversion script did you offer to do?
08:08 PM andypugh: Just making the 2.7 to 2.8 autoconverter remove the no-longer-used cycle times.
08:08 PM jepler: ah OK
08:10 PM andypugh: It should be a quick job, but that script is kind-of tedious to test because you have to keep reverting the test confic to try again.
08:10 PM andypugh: There might be a way to use the Power of Git to make that easier, but I haven’t even tried that.
08:27 PM linuxcnc-build_: build #5058 of 0000.checkin is complete: Failure [4failed fetch branch to local git repo] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/5058 blamelist: Jeff Epler <jepler@unpythonic.net>
08:37 PM jepler: (this is fine)
09:43 PM jepler: skunkworks_: finally doing a heated bed print (PETG). it went *AWFUL* the first time, but I soon discovered that cura had set my filament diameter to 2.85mm! so it was underfeeding by 60% or so
09:44 PM jepler: there's at least one other setting (infill: 0%) which is just crazy, but I don't think it matters for this print
09:44 PM jepler: anyway bed at 72 (target 75) so yay
10:05 PM skunkworks_: people have been saying sometimes cura sets the diameter wrong randomly
10:05 PM skunkworks_: cool
11:36 PM Tom_itx is now known as Tom_L