#linuxcnc-devel Logs

Jun 11 2017

11:32 AM skunkworks__: high speed spindle seems to have broken in.. Running really well now
11:34 AM skunkworks__: knock on wood
11:34 AM skunkworks__: *high speed as in 10k
03:02 PM skunkworks__: linuxcnc needs a progressive peck cycle. (the peck distance gets less the deeper it goes)
03:03 PM skunkworks__: I could probably do it in o-words pretty easy
03:03 PM skunkworks__: it could probably do .1+ at the surface but once the flutes are burried - .04-.045 is about the max peck
03:05 PM skunkworks__: only ruined one drill so far (I had a current meter plugged between the motor and the wall - it unplugged itself.. I never ran so fast to hit the estop
03:05 PM skunkworks__: (almost 100 drilled so far)
03:37 PM Tom_L: skunkworks__ you do a full retract each peck right?
03:41 PM skunkworks__: yes
03:42 PM skunkworks__: it is going pretty well - about 3.5 minutes per hole
03:42 PM Tom_L: i forget, does the peck cycle feed back to the peck depth or rapid there?
03:42 PM Tom_L: that would take up alot of dead time...
03:44 PM skunkworks__: rapid
03:44 PM skunkworks__: to just above the previous peck depth
03:44 PM skunkworks__: it works pretty well
03:45 PM skunkworks__: you can see it here
03:45 PM skunkworks__: https://www.youtube.com/watch?v=n7wuQ7xDDRE
03:51 PM Tom_L: yeah
04:23 PM jepler: if you get an e-mail from sourceforge asking you to reconfirm you want to be on the linuxcnc mailing lists MAKE SURE YOU TURN OFF the extra radio buttons asking for their spam. at least one of them was automatically turned in the screen where I reconfirmed my subscription to the -users list.
04:23 PM jepler: effing sourceforge
04:24 PM jepler: oh apparently you have to leave at least one "spam me" button on. effing sourceforge.
04:24 PM jepler: "I agree to receive [unspecified] correspondence from SourceForge.net"
04:41 PM jepler: oh I see this has been discussed at length on the mailing list
07:50 PM skunkworks__: https://www.youtube.com/watch?v=gVU-dboakT4
10:08 PM Tom_L: where did you find drills that long?
10:09 PM Tom_L: are they standard twist or special?
10:16 PM seb_kuzminsky: Tom_L: "aircraft drills"
10:54 PM KGB-linuxcnc: 03Robert Ellenberg 05feature/spindle-sync-overhaul-2.7-rebase d7fa7b4 06linuxcnc New branch with 30 commits pushed, 1021 files changed, 03737(+), 04353(-) since feature/spindle-sync-overhaul-2.7-rebase/c9abccc
11:06 PM linuxcnc-build: build #4976 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/4976 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:09 PM linuxcnc-build: build #2790 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/2790 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:12 PM linuxcnc-build: build #4173 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/4173 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:17 PM linuxcnc-build: build #2115 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/2115 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:20 PM linuxcnc-build: build #3123 of 1400.rip-wheezy-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/3123 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:21 PM linuxcnc-build: build #4962 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/4962 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:21 PM linuxcnc-build: build #4965 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/4965 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:23 PM linuxcnc-build: build #4963 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/4963 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:24 PM linuxcnc-build: build #4963 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/4963 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:24 PM linuxcnc-build: build #1591 of 1520.rip-jessie-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/1591 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:24 PM linuxcnc-build: build #3124 of 1403.rip-wheezy-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/3124 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:26 PM linuxcnc-build: build #1590 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/1590 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:26 PM linuxcnc-build: build #3325 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/3325 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:27 PM linuxcnc-build: build #1590 of 1500.rip-jessie-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/1590 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:27 PM linuxcnc-build: build #2639 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/2639 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:28 PM linuxcnc-build: build #1592 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/1592 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:34 PM -!- #linuxcnc-devel mode set to +v by ChanServ
11:50 PM linuxcnc-build_: build #166 of 1540.rip-jessie-armhf is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1540.rip-jessie-armhf/builds/166 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:50 PM linuxcnc-build_: build #3132 of 1405.rip-wheezy-armhf is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/3132 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:50 PM linuxcnc-build_: build #4980 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/4980 blamelist: Robert W. Ellenberg <rwe24g@gmail.com>
11:55 PM -!- #linuxcnc-devel mode set to +v by ChanServ