Back
[15:01:40] <skunkworks_> zlog
[16:46:26] <KGB-linuxcnc> 03John Thornton 052.7 7377360 06linuxcnc 10docs/src/gcode/g-code.txt Docs: update g61 for the new trajectory planner * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7377360
[17:29:45] <KGB-wlo> push to master branch:
http://linuxcnc.org/
[17:29:49] -linuxcnc-github:#linuxcnc-devel- [13wlo] 15SebKuzminsky pushed 1 new commit to 06master: 02
https://github.com/LinuxCNC/wlo/commit/c62affe91062000f191f3b7e0d8a5f89b2abdcfe
[17:29:49] -linuxcnc-github:#linuxcnc-devel- 13wlo/06master 14c62affe 15Sebastian Kuzminsky: remove links to defunct gmane
[18:00:26] <jepler> sigh gmane
[18:04:24] <andypugh> Did gmane die?
[18:05:48] <seb_kuzminsky> yeah :-(
[18:05:53] <andypugh> Oh, looking at the Wikipedia page, it was a mail-to-new gateway
[18:06:05] <seb_kuzminsky> i'm going to pour out a cup of coffee for my fallen homie, gmane
[18:06:14] <andypugh> I actually used to use a newsreader to read my email, it threaded well
[18:06:50] <andypugh> seb_kuzminsky: It’s actually back, you know. But not carrying linuxcnc or emc lists
[18:08:02] <seb_kuzminsky> oh yeah, i see that now
[18:08:09] <seb_kuzminsky> the links we had to our lists didn't work
[18:08:13] <andypugh> https://lars.ingebrigtsen.no/2016/09/06/gmane-alive/
[20:57:49] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 cc3ac7e 06linuxcnc 10docs/src/gcode/machining-center.txt 10docs/src/gcode/other-code.txt docs: clarify feed rate info * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=cc3ac7e
[21:30:33] -linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15SebKuzminsky commented on issue #180: I can replicate this problem with LinuxCNC 2.7.7.... 02
https://github.com/LinuxCNC/linuxcnc/issues/180#issuecomment-254989870
[21:52:34] -linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15SebKuzminsky commented on issue #180: Another data point: same version of linuxcnc, same (imperial) config, F1 F2 Ctrl-Home, **no** G21, G95, F10, jog around, then S100 makes the Active G-Codes F-word and linuxcnc.stat.settings[1] jump to an unexpected value. 02
https://github.com/LinuxCNC/linuxcnc/issues/180#issuecomment-254992439
[23:19:58] <KGB-linuxcnc> 03Chris Radek 05master 3ffb2ec 06linuxcnc 10lib/python/rs274/glcanon.py Fix DRO alignment * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=3ffb2ec