Back [03:48:45]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15andypugh commented on issue #168: Gets my vote. 02 https://github.com/LinuxCNC/linuxcnc/pull/168#issuecomment-251611894 [09:13:08]<skunkworks> zlog
[10:49:54]<seb_kuzminsky> blue origin launch in 14 minutes: https://www.blueorigin.com/ [11:03:38]<jepler> that is an extra phallic space ship right there
[11:04:38]<kwallace_ofcb> Thank you Seb
[11:09:29]<jepler> hm they said an engine was going to fire on the capsule and decelerate it to 3mph but I didn't see it
[11:11:02]<seb_kuzminsky> the capsule wobbled like crazy during escape
[11:11:09]<seb_kuzminsky> beats blowing up i guess
[11:11:21]<jepler> yeah I would have lost my lunch tumbling like that
[11:11:59]<seb_kuzminsky> the keep emphasizing the be3 throttle-down capability because it's better than the merlin
[11:12:38]<kwallace_ofcb> Petty Cool.
[11:12:52]<kwallace_ofcb> Pretty
[11:14:38]<skunkworks> cool
[11:15:20]<skunkworks> I didn't see the crew capsule engine fire either.
[11:16:24]<kwallace_ofcb> I suppose it fires for only the last meter or two.
[11:16:46]<skunkworks> right
[11:17:04]<seb_kuzminsky> yeah, it might be that the puff of dust at touchdown was mostly kicked up by engine exhaust
[11:22:04]<jepler> the announcer had talked up how much dust the engine was going to kick up that I expected more
[11:26:38]<jepler> but yeah it wouldn't necessarily need much vertical descent distance to get from 15mph to 3mph so I might have blinked and missed it
[11:55:38]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15SebKuzminsky commented on issue #171: Looks good. Can you run this through the buildbot to verify that the 2.7 platforms all support numpy.array etc? 02 https://github.com/LinuxCNC/linuxcnc/pull/171#issuecomment-251725996 [12:07:50]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15jepler commented on issue #171: unfortunately I don't think we runtest image-to-gcode at all at the moment. in fact there's no way to run it without a user interface, so doing this kind of testing would require additional changes. 02 https://github.com/LinuxCNC/linuxcnc/pull/171#issuecomment-251729140 [12:14:53]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15jepler commented on issue #171: Precise and Wheezy have 1.6.1 and 1.6.2 respectively. I could easily test all the new names used on wheezy, and all looks well:... 02 https://github.com/LinuxCNC/linuxcnc/pull/171#issuecomment-251730965 [12:32:19]<seb_kuzminsky> jepler: thanks for checking
[13:10:35]<skunkworks>http://www.model-engineer.co.uk/forums/postings.asp?th=120519&p=8#2070121 [13:56:06]<skunkworks>https://www.youtube.com/channel/UCjOe4VxKL86HyVrshTmiUBQ [13:58:25]<skunkworks> it is pretty amazing. not once had I ever thought of using the tool path preview to show stock/actual cuts.
[15:02:04]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15tseufl opened pull request #172: Update 9_axis.glade (06master...06master) 02 https://github.com/LinuxCNC/linuxcnc/pull/172 [16:05:08]<seb_kuzminsky> skunkworks: yeah, that first confused me, then blew my mind
[16:19:02]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15SebKuzminsky commented on issue #168: Looks good to me. 02 https://github.com/LinuxCNC/linuxcnc/pull/168#issuecomment-251795505 [16:44:16]<skunkworks_> zlog
[17:13:14]<jepler> I've seen cradek put "/" on the lines to enter/exit cutter comp mode, which gives you that toggle
[17:13:21]<jepler> if I understand what we're talking about
[17:53:14]<KGB-linuxcnc> 03Dewey Garrett 052.7 23dcacb 06linuxcnc 10scripts/latency-histogram latency-histogram: more info in error message * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=23dcacb
[18:02:40]<seb_kuzminsky> jepler: i was talking about the NativeCAM videos that skunkworks linked, they use "fake" toolpaths to show the work piece
[18:42:31]<jepler> I see, sounds different than what I was talking about
[18:45:07]<jepler> aha nativecam fka features
[18:46:09]<jepler>http://forum.linuxcnc.org/forum/40-subroutines-and-ngcgui/31659-nativecam-is-features-renamed [20:28:13]<jepler> find corny singles in your neighborhood
[20:55:47]<seb_kuzminsky> jepler: wrong window
[21:25:11]<KGB-linuxcnc> 03Jeff Epler 052.6 b2a4f86 06linuxcnc 10src/po/README remove note about defunct weblate service * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b2a4f86
[21:25:28]<KGB-linuxcnc> 03Jeff Epler 052.7 6a03445 06linuxcnc Merge remote-tracking branch 'origin/2.6' into 2.7 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=6a03445
[21:33:10]<KGB-linuxcnc> 03Jeff Epler 05master ad5ba34 06linuxcnc 10scripts/latency-histogram Merge remote-tracking branch 'origin/2.7' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ad5ba34
[21:37:01]<KGB-linuxcnc> 03Jeff Epler 052.7 94873cb 06linuxcnc Merge remote-tracking branch 'gh-jepler/numpy' into 2.7 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=94873cb
[21:38:03]<KGB-linuxcnc> 03Jeff Epler 05master be57635 06linuxcnc Merge remote-tracking branch 'gh-jepler/configure-asciidoc-man' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=be57635
[21:38:03]<KGB-linuxcnc> 03Jeff Epler 05master 2b0e043 06linuxcnc 10src/emc/usr_intf/axis/scripts/image-to-gcode.py Merge remote-tracking branch 'origin/2.7' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2b0e043
[21:40:26]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15cradek closed pull request #169: configure: All supported platforms have asciidoc 8.6 (06master...06configure-asciidoc-man) 02 https://github.com/LinuxCNC/linuxcnc/pull/169 [21:40:33]<KGB-linuxcnc> 03Jeff Epler 05master 62cb471 06linuxcnc 10src/configure.in configure: remove obsolete gettext version checks * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=62cb471
[21:46:34]-linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15jepler commented on issue #172: @tseufl thanks for your contribution! this commit lacks a "signed-off-by" in the commit message. Please review the documentation about "signed-off-by": http://www.linuxcnc.org/docs/html//code/contributing-to-linuxcnc.html#_signed_off_by_policy... 02 https://github.com/LinuxCNC/linuxcnc/pull/172#issuecomment-251850807 [21:52:19]<jepler> pet peeve of the day: calling software that runs on the web platform "multiplatform"
[22:05:32]<jepler> .. customized foot apparell business ... socks2bu
[22:31:46]<KGB-linuxcnc> 03Dewey Garrett 05master 7be62e6 06linuxcnc 10src/emc/usr_intf/axis/scripts/axis.py axis.py: disallow individual coordinate homing if ... * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7be62e6
[22:47:57]<linuxcnc-build> build #613 of 4017.5.deb-wheezy-armhf is complete: Failure [4failed apt-get-update shell_3] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4017.5.deb-wheezy-armhf/builds/613 blamelist: Jeff Epler <jepler@unpythonic.net>
[23:00:38]<linuxcnc-build> build #40 of 4025.deb-jessie-armhf is complete: Failure [4failed shell_3] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4025.deb-jessie-armhf/builds/40 blamelist: Jeff Epler <jepler@unpythonic.net>