Back
[00:26:05] <linuxcnc-build> build #3174 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3174 blamelist: Moses McKnight <moses@texband.net>
[00:52:00] <seb_kuzm1nsky> buildbot problems
[00:52:17] <seb_kuzm1nsky> dyndns took down one of their servers and that broke my internet and that broke the buildbot :-(
[01:14:41] <nojepler> maybe mentioned already (on the mailing list 5/27):
[01:14:43] <nojepler> I uploaded a new linux package (version 4.0.4-1) to unstable earlier
[01:14:47] <nojepler> today with the PREEMPT_RT patchset included, so you could also just wait
[01:14:49] <nojepler> a day for it to hit the mirrors.
[06:41:09] <skunkworks_> cradek, it seems to - yes. Just looking at he velocity plots - the slope is definatly much much higher than 30in/s^2
[07:42:06] <skunkworks_> 'steaper'
[07:58:16] <skunkworks_> heh - steeper. finally a couple cups of coffe in me
[07:58:32] <skunkworks_> maybe if you have the violations less than 100ms - they are overlooked... :)
[08:15:22] <mozmck> I would like to add a small feature to hal_sourceview in 2.7 if that's alright.
http://pastie.org/10219279
[08:17:55] <mozmck> It allows setting a custom coloring scheme to the gcode highlighting. Setting the language defines what is highlighted, and the scheme defines the colors and font styles etc.
[08:25:56] <mozmck> No objections? Good I'll push it then ;)
[08:32:24] <skunkworks_> heh
[08:32:53] <skunkworks_> it can always be backed out. Then you can yell and scream at how the linuxcnc develpers are meanies..
[08:32:59] <mozmck> hi skunkworks_: How's the new baby?
[08:33:23] <skunkworks_> Good. sleeping for an 3-4 hours at a time...
[08:33:35] <mozmck> haha! I think it's fine - does not affect anything existing and it's a small patch.
[08:33:36] <skunkworks_> month old already
[08:34:13] <mozmck> Good deal! Ours is 6mo already now, and getting to be quite a hoot.
[08:35:14] <skunkworks_> heh - our 2.5 year old now can ride a pedal bike without training wheels.. Balance bikes at an early age are awesome.
[08:36:10] <mozmck> That's pretty good. Our 3 year old doesn't ride a bike yet, partly because the ones we have are a little too big.
[09:24:59] <seb_kuzminsky> linuxcnc-build: force build --branch=2.7 0000.checkin
[09:25:00] <linuxcnc-build> build forced [ETA 1h09m25s]
[09:25:00] <linuxcnc-build> I'll give a shout when the build finishes
[09:25:47] <seb_kuzminsky> mozmck: i looked at your paste but i have no idea what it does. if you say it's an improvement i trust you
[09:26:13] <mozmck> haha!
[09:26:31] <seb_kuzminsky> skunkworks_: balance bikes > training wheels
[09:26:44] <skunkworks_> Agreed
[09:27:48] <mozmck> seb_kuzminsky: In gedit you can select a color scheme for the source highlighting - this adds a function to allow that in the EMC_Sourceview widget.
[09:30:27] <seb_kuzminsky> great!
[09:32:25] <KGB-linuxcnc> 03Moses McKnight 052.7 a2c6be6 06linuxcnc 10lib/python/gladevcp/hal_sourceview.py Add function to select gcode color scheme in gladevcp gcode widget * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a2c6be6
[09:33:02] <mozmck> seb_kuzminsky: I hope that push worked, it gave me this error: remote: git_buildbot: ERROR: Could not connect to buildbot.linuxcnc.org:5133: User timeout caused connection failure.
[09:35:48] <skunkworks__> https://www.youtube.com/watch?v=bLwwfzP1caA&feature=youtu.be
[09:36:33] <mozmck> skunkworks__: neat! Another problem I have here is no pavement!
[09:51:54] <seb_kuzm1nsky> mozmck: it probably didnt work
[09:52:07] <seb_kuzminsky> my network connection has been really flaky since last night
[09:52:42] <seb_kuzminsky> i bet your push made it into git.linuxcnc.org, but the hooks on cradek's server couldn't connect to the buildbot to tell it to start a build
[09:52:57] <seb_kuzminsky> try poking it manually via irc like i did above
[09:58:01] <mozmck> oh, the build? ok
[09:58:22] <mozmck> linuxcnc-build_: get busy!
[09:58:22] <linuxcnc-build_> What you say!
[09:59:01] <mozmck> linuxcnc-build_: force build --branch=2.7 0000.checkin
[09:59:06] <linuxcnc-build_> The build has been queued, I'll give a shout when it starts
[09:59:28] <mozmck> seb_kuzminsky: what does 0000.checkin do?
[09:59:53] <mozmck> haha! 611 sold???
http://www.ebay.com/itm/171675149550
[10:09:11] <linuxcnc-build_> build #1325 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/1325
[10:16:51] <linuxcnc-build_> build #3175 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3175
[10:16:51] <linuxcnc-build_> build forced [ETA 1h09m25s]
[10:16:51] <linuxcnc-build_> I'll give a shout when the build finishes
[10:19:26] <mozmck> seb_kuzminsky: is that more buildbot problems? Doesn't look related to my commit anyhow.
[11:08:21] <linuxcnc-build_> Hey! build 0000.checkin #3176 is complete: Success [3build successful]
[11:08:21] <linuxcnc-build_> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3176
[12:48:01] <cradek> mozmck: "Label is not to be sold separately"
[12:48:51] <mozmck> Well, technically he is selling it on a computer ;)
[12:51:54] <cradek> people who want nonfree software sometimes have to do weird things...
[12:52:28] <cradek> andypugh: thanks for making that bug report
[13:37:14] <skunkworks_> http://www.machsupport.com/forum/index.php/topic,30110.msg209807.html#msg209807
[19:35:52] <Tom_itx> pcw_home where do you assign your pins in ise now?
[19:36:00] <Tom_itx> i'm not used to the new versions yet..
[19:36:25] <Tom_itx> looking over one of my old file sets here
[19:45:50] <Tom_itx> ok i found PACE
[20:23:17] <Tom_itx> hah ver 14.7 must not be as efficient as ver 4... the design generated in 14 won't fit
[23:19:23] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 1854155 06linuxcnc 10docs/src/gcode/m-code.txt docs: minor layout cleanup * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1854155