Back
[00:10:28] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 57d173c 06linuxcnc 10configs/by_interface/mesa/hm2-servo/5i22-big.ini 10configs/by_interface/mesa/hm2-servo/5i22-small.ini 10configs/by_interface/mesa/hm2-stepper/5i22-big.ini 10configs/by_interface/mesa/hm2-stepper/5i22-small.ini fix hm2 5i22 sample configs * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=57d173c
[01:33:44] <KGB-linuxcnc> 03Sebastian Kuzminsky 05v2.5_branch 353ae8e 06linuxcnc 10docs/src/gcode/overview.txt docs: remove some broken asciidoc markup * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=353ae8e
[01:49:31] <seb_kuzminsky> uh, you guys
[01:49:59] <seb_kuzminsky> i think #383 is a 2.6-blocker i forgot...
[01:50:02] <seb_kuzminsky> https://sourceforge.net/p/emc/bugs/383/
[02:31:08] <KGB-linuxcnc> 03Sebastian Kuzminsky 05v0 7563502 06hostmot2-firmware 10debian/gencontrol deb: fix the list of files to install * 14http://git.linuxcnc.org/?p=hostmot2-firmware.git;a=commitdiff;h=7563502
[02:31:08] <KGB-linuxcnc> 03Sebastian Kuzminsky 05v0 520a609 06hostmot2-firmware 10debian/rules deb: un-break the compat symlinks * 14http://git.linuxcnc.org/?p=hostmot2-firmware.git;a=commitdiff;h=520a609
[02:48:19] <hm2-buildmaster> build #20 of build is complete: Failure [4failed build-debian-package] Build details are at
http://buildbot.linuxcnc.org/hm2-buildbot/builders/build/builds/20 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[03:02:33] <linuxcnc-build> build #626 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed apt-get-update shell_1] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/626 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[03:03:08] <seb_kuzminsky> argh
[07:03:35] <jepler> skunkworks: mah's as-big-as-your-arm list remains unlicensed in machinekit as well.
https://github.com/machinekit/machinekit/blob/master/src/emc/rs274ngc/canonmodule.cc
[07:05:14] <jepler> er seb_kuzminsky ^
[07:07:16] <archivist> we need a "by contributing your code" automatic license term
[07:10:51] <skunkworks> logger[psha],
[07:10:52] <logger[psha]> skunkworks: Log stored at
http://psha.org.ru/irc/%23linuxcnc-devel/2014-07-28.html
[08:16:10] <KGB-linuxcnc> 03Jeff Epler 052.6 e96b9d4 06linuxcnc 10(38 files in 10 dirs) configs: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e96b9d4
[08:16:10] <KGB-linuxcnc> 03Jeff Epler 052.6 d7d150d 06linuxcnc 10scripts/test-libgl-bug.sh scripts: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d7d150d
[08:16:11] <KGB-linuxcnc> 03Jeff Epler 052.6 8118213 06linuxcnc 10share/gscreen/skins/9_axis/9_axis_handler.py 10share/gscreen/skins/gaxis/gaxis_handler.py 10share/gscreen/skins/industrial/industrial_handler.py gscreen: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=8118213
[08:16:13] <KGB-linuxcnc> 03Jeff Epler 052.6 a5b0494 06linuxcnc 10src/emc/nml_intf/debugflags.h nml_intf: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a5b0494
[08:16:16] <KGB-linuxcnc> 03Jeff Epler 052.6 ebd2827 06linuxcnc 10src/emc/pythonplugin/python_plugin.cc 10src/emc/pythonplugin/python_plugin.hh 10src/emc/pythonplugin/testpp.cc pythonplugin: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ebd2827
[08:16:21] <KGB-linuxcnc> 03Jeff Epler 052.6 b56248b 06linuxcnc 10(10 files) rs274ngc: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b56248b
[08:16:24] <KGB-linuxcnc> 03Jeff Epler 052.6 0dbc1bf 06linuxcnc 10src/emc/sai/builtin_modules.cc 10src/emc/sai/dummyemcstat.cc sai: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=0dbc1bf
[08:16:28] <KGB-linuxcnc> 03Jeff Epler 052.6 7920e59 06linuxcnc 10src/emc/task/backtrace.cc 10src/emc/task/signalhandler.cc 10src/emc/task/taskclass.hh 10src/emc/task/taskmodule.cc task: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7920e59
[08:16:33] <KGB-linuxcnc> 03Jeff Epler 052.6 0bc4426 06linuxcnc 10(21 files in 11 dirs) tests: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=0bc4426
[08:19:26] <jepler> I'll bite the bullet on this one. mah is on record as wanting his contributions to be at least as free as GPLv2+, and I have no concerns about anyone else.
[08:19:38] <jepler> bbl
[08:26:06] <skunkworks> Yay
[08:26:09] <skunkworks> !
[08:34:39] <skunkworks> master is running the 7i80/5i25 combo
[08:35:33] <skunkworks> I have not done the iptables yet..
[09:09:05] <seb_kuzminsky> jepler: thanks.....
[09:33:13] <KGB-linuxcnc> 03Jeff Epler 052.6 44e1d10 06linuxcnc 10(5 files) scripts: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=44e1d10
[09:33:13] <KGB-linuxcnc> 03Jeff Epler 052.6 ba9bb8e 06linuxcnc 10share/gscreen/skins/gaxis_no_plot/gaxis_no_plot_handler.py gscreen: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ba9bb8e
[09:33:13] <KGB-linuxcnc> 03Jeff Epler 052.6 12f7810 06linuxcnc 10src/emc/rs274ngc/interp_setup.cc rs274ngc: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=12f7810
[09:34:00] <jepler> .. another batch, getting some files added between 198b45e and 0bc4426
[09:38:47] <skunkworks> jepler, I don't know what I am doing
[09:39:17] <jepler> skunkworks: me either. I don't think I know the way that Debian loads iptables rules at boot time.
[09:39:28] <skunkworks> I created a iptables file in etc that contains the paragraph from the eth docs..
[09:39:53] <skunkworks> but I maybe don't know if I am actually using iptables... or just don't understand what I am doing
[09:39:55] <jepler> on some very old system of mine, that file was always loaded at boot time
[09:39:59] <linuxcnc-build> build #423 of 1402.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-amd64/builds/423 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:40:00] <skunkworks> oh
[09:40:01] <jepler> I don't think that's actually true on debian 7
[09:40:11] <jepler> let me look at this first ^^
[09:40:18] <skunkworks> wow - you read my mind :)\
[09:40:22] <skunkworks> wierd..
[09:40:36] <linuxcnc-build> build #423 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/423 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:40:38] <jepler> oh boy I did not think before committing some of that last stuff
[09:40:53] <skunkworks> heh
[09:41:41] <linuxcnc-build> build #2265 of 1900.clang-lucid-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1900.clang-lucid-rtai-i386/builds/2265 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:41:48] <KGB-linuxcnc> 03Jeff Epler 052.6 7720c46 06linuxcnc 10src/emc/rs274ngc/interp_setup.cc interp_setup: Can't use shell comments in a C++ file * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7720c46
[09:44:27] <linuxcnc-build> build #79 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/79 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:45:21] <linuxcnc-build> build #2265 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/2265 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:47:01] <linuxcnc-build> build #2267 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/2267 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:47:52] <linuxcnc-build> build #2266 of 1200.rip-lucid-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/2266 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:48:29] <KGB-linuxcnc> 03Jeff Epler 05master abdae92 06linuxcnc 10src/rtapi/rtapi_uspace.hh 10src/rtapi/uspace_rtapi_app.cc uspace: Factor RtapiApp class definition to header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=abdae92
[09:48:29] <KGB-linuxcnc> 03Jeff Epler 05master 6983fc0 06linuxcnc 10src/rtapi/rtapi_uspace.hh 10src/rtapi/uspace_rtapi_app.cc uspace: Move rtapi_task / task_array to header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=6983fc0
[09:48:29] <KGB-linuxcnc> 03Jeff Epler 05master 793e2ed 06linuxcnc 10src/rtapi/rtapi_uspace.hh 10src/rtapi/uspace_rtapi_app.cc uspace: Factor out "task_get" into a method * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=793e2ed
[09:48:32] <KGB-linuxcnc> 03Jeff Epler 05master 145ec34 06linuxcnc 10src/rtapi/uspace_rtapi_app.cc uspace: use RtapiApp::get_task() * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=145ec34
[09:48:36] <KGB-linuxcnc> 03Jeff Epler 05master 976556d 06linuxcnc 10src/rtapi/rtapi_uspace.hh 10src/rtapi/uspace_rtapi_app.cc uspace: Eliminate race condition when allocating a task * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=976556d
[09:48:40] <KGB-linuxcnc> 03Jeff Epler 05master c02f4af 06linuxcnc 10src/rtapi/rtapi_uspace.hh uspace: Private storage for other RtapiApp implementations * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c02f4af
[09:48:44] <KGB-linuxcnc> 03Jeff Epler 05master 57e1d54 06linuxcnc 10(13 files in 2 dirs) docs: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=57e1d54
[09:48:47] <KGB-linuxcnc> 03Jeff Epler 05master 1a0c391 06linuxcnc 10src/rtapi/rtapi_uspace.hh 10src/rtapi/uspace_common.h 10src/rtapi/uspace_rtapi_app.cc rtapi: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1a0c391
[09:48:52] <KGB-linuxcnc> 03Jeff Epler 05master ff8afd4 06linuxcnc 10src/hal/drivers/mesa-hostmot2/hm2_eth.c 10src/hal/drivers/mesa-hostmot2/hm2_eth.h 10src/hal/drivers/mesa-hostmot2/lbp16.h hal: Note GPL license on files * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ff8afd4
[09:49:02] <linuxcnc-build> build #2063 of 1901.clang-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1901.clang-precise-amd64/builds/2063 blamelist: Jeff Epler <jepler@unpythonic.net>
[09:49:10] <jepler> skunkworks: you might try following these instructions for setting up iptables:
https://wiki.debian.org/iptables
[09:49:23] <skunkworks> jepler, thanks - will look
[09:49:31] <jepler> skunkworks: it would be great if you would work out a procedure that we can document
[09:49:37] <skunkworks> sure
[09:50:53] <linuxcnc-build> build #1468 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/1468 blamelist: Jeff Epler <jepler@unpythonic.net>
[10:07:32] <linuxcnc-build> build #2267 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/2267 blamelist: Jeff Epler <jepler@unpythonic.net>
[10:07:33] <linuxcnc-build> build #2267 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/2267 blamelist: Jeff Epler <jepler@unpythonic.net>
[10:07:33] <linuxcnc-build> build #2272 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2272 blamelist: Jeff Epler <jepler@unpythonic.net>
[10:26:08] <KGB-linuxcnc> 03Sebastian Kuzminsky 05v0 34a5fdd 06hostmot2-firmware 10debian/rules deb: make 'debian/rules install' target conform to debian expectations * 14http://git.linuxcnc.org/?p=hostmot2-firmware.git;a=commitdiff;h=34a5fdd
[11:07:25] <skunkworks> http://pastebin.com/XumeqUAi
[11:07:34] <skunkworks> jepler, ^
[11:08:14] <skunkworks> I cheated (and still have to figure out how to make the service automatically start) using iptables-persistent
[11:09:07] <jepler> skunkworks: so here's one basic test to make sure it's working:
[11:09:18] <jepler> in one terminal window, start a ping to the mesa board
[11:09:22] <jepler> you should get pings back
[11:09:29] <jepler> start linuxcnc. your pings should start failing.
[11:09:33] <jepler> exit linuxcnc. pings should work again.
[11:19:04] <pcw_home> works for me
[11:19:05] <pcw_home> linuxcnc running:
[11:19:07] <pcw_home> PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
[11:19:08] <pcw_home> ping: sendmsg: Operation not permitted
[11:19:10] <pcw_home> linuxcnc stopped:
[11:19:11] <pcw_home> PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
[11:19:13] <pcw_home> 64 bytes from 10.10.10.10: icmp_req=1 ttl=64 time=0.150 ms
[11:19:14] <pcw_home> 64 bytes from 10.10.10.10: icmp_req=2 ttl=64 time=0.084 ms
[11:20:11] <pcw_home> first ping is long probably because the static arp entry was deleted
[11:23:04] <skunkworks> I get the same thing - cool
[11:24:42] <pcw_home> I also dont know the proper way to have the filter added at startup
[11:25:30] <skunkworks> pcw_home, did you use iptables-persistent?
[11:26:55] <pcw_home> yes, just copy pasted from the man page into a file and used iptables-persistent
[11:27:52] <pcw_home> (had to remove leading blanks, iptables doesn't like them)
[11:30:27] <linuxcnc-build> build #425 of 1402.rip-wheezy-amd64 is complete: Failure [4failed configuring] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-amd64/builds/425 blamelist: Jeff Epler <jepler@unpythonic.net>
[11:31:16] <skunkworks> it says it should automatically start on boot.. but it doesn't here - I had to do a service iptables-persistent start..
[11:31:20] <linuxcnc-build> build #425 of 1400.rip-wheezy-i386 is complete: Failure [4failed configuring] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/425 blamelist: Jeff Epler <jepler@unpythonic.net>
[11:31:23] <skunkworks> I should know this..
[11:32:43] <KGB-linuxcnc> 03Dewey Garrett 05master d4de611 06linuxcnc 10scripts/linuxcnc_var.in 10src/configure.in linuxcnc_var: report RTS not SIMULATOR * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d4de611
[11:32:53] <pcw_home> Sorry I just did iptables-restore not -persistant
[11:33:17] <skunkworks> heh - the iptables-persistent is supposed to do all this for you.
[11:34:57] <jepler> seb_kuzminsky: what do I need to do to pass --disable-check-runtime-deps to configure for rip builds on buildbot?
[11:36:36] <skunkworks> hmm - the script is in init.d..
[11:38:14] <seb_kuzminsky> jepler: you need to change the buildmaster script
[11:38:20] <seb_kuzminsky> probably easier if i do it...
[11:38:39] <jepler> seb_kuzminsky: OK
[11:38:41] <jepler> thank you
[11:38:42] <skunkworks> it worked - (rebooting started the service)
[11:38:44] <seb_kuzminsky> except the buildmaster would have to only do it on branches that support that flag, and i dont know how to tell
[11:38:51] <skunkworks> whatever I was doing wrong..
[11:39:24] <jepler> skunkworks: if you installed the package, then write /etc/iptables/rules.v4, I think it's expected that you would have to (re)start iptables-persistent to pick up the rules
[11:40:13] <skunkworks> jepler, I thought I had rebooted after editing the rules.v4 - but maybe I didn't. Seems to work as expected.
[11:40:21] <jepler> skunkworks: OK
[11:40:38] <skunkworks> I can write up directions on it.. It is pretty strait forward.
[11:41:20] <jepler> > If iptables are not otherwise in use, place the following (with leading whitespace removed) in the file /etc/iptables/rules.v4, install the package iptables-persistent, and reboot:
[11:41:30] <jepler> does that just about cover it?
[11:42:10] <skunkworks> well - is rules.v4 there before installing iptables-persistent?
[11:43:06] <jepler> no, and the /etc/iptables directory itself doesn't exist either
[11:43:10] <jepler> I'll change the order..
[11:43:19] <jepler> > If iptables are not otherwise in use, install the package iptables-persistent, place the following (with leading whitespace removed) in the file /etc/iptables/rules.v4, and reboot:
[11:44:09] <skunkworks> yes!
[11:55:30] <jepler> pcw_home: I know this is a super gross idea, but ...
[11:55:52] <jepler> pcw_home: what if you made the hostmot2 board respond to all addresses of the form 192.168.x.121
[11:56:26] <jepler> .. so that poor schmucks whose internet router used 192.168.1/24 as the private network don't have to use mesaflash, they can just pick 192.168.2/24 instead
[11:58:55] <pcw_home> Its possible but I would not want that in general so I would have to test for
[11:58:56] <pcw_home> default IP addr mode and mask the proper byte in the compare
[11:59:07] <jepler> hm, yeah
[11:59:12] <jepler> I don't really think you should do what I suggested
[12:00:23] <pcw_home> well now that I have expanded the ROM I have the luxury of 4K inst of code space, anything is possible :-)
[12:01:11] <pcw_home> or add DHCP code
[12:01:34] <jepler> pcw_home: is the 7i80 MDI, MDI-X or auto-crossover?
[12:01:38] <archivist> that would confuse the private net users down on 10.0.0.x :)
[12:02:00] <pcw_home> auto
[12:02:23] <pcw_home> (is that the same as MDI-X?)
[12:03:23] <pcw_home> The 7I80 does support bootp (not sure anyone uses that)
[12:05:37] <jepler> pcw_home: I'm not sure I have the nomenclature right
[12:05:50] <jepler> pcw_home: but basically, no need for a crossover cable
[12:06:01] <pcw_home> Yes any cable is OK
[12:06:16] <pcw_home> auto-MDIX?
[12:07:47] <pcw_home> Ethernet chip data sheet says "auto MDI/MDI-X"
[12:07:55] <jepler> OK, got it
[12:09:03] <jepler> I didn't see that 7i80hdman mentioned this one
[12:10:05] <pcw_home> I'll add it to the manual
[12:14:38] <jepler> skunkworks: hey, care to comment on these docs before I commit 'em ?
http://pastebin.com/qgGs97sH
[12:15:29] <jepler> bbl, lunchtime. I'll read back in case you have some comments
[12:27:59] <linuxcnc-build> build #2274 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2274 blamelist: Jeff Epler <jepler@unpythonic.net>
[12:28:39] <linuxcnc-build> build #426 of 1400.rip-wheezy-i386 is complete: Failure [4failed configuring] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/426 blamelist: Dewey Garrett <dgarrett@panix.com>
[12:29:31] <linuxcnc-build> build #426 of 1402.rip-wheezy-amd64 is complete: Failure [4failed configuring] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-amd64/builds/426 blamelist: Dewey Garrett <dgarrett@panix.com>
[12:35:48] <skunkworks> jepler, looks good to me. (although I used the gui to set the nics address/disabling ip6.
[13:24:36] <jepler> skunkworks: OK, I don't know what that does :-P
[13:24:59] <skunkworks> heh - you comandline person you..
[13:25:01] <jepler> skunkworks: can you pastebin the /sbin/ifconfig output for that interface?
[13:25:31] <jepler> skunkworks: and also the output of $ /sbin/sysctl -a | grep disable_ipv6
[13:26:51] <jepler> ... just want to know if ivp6 is really turned off by your GUI doings
[13:27:57] <skunkworks> http://pastebin.com/xrrHppqy
[13:30:34] <jepler> inet6 addr: fe80::76d4:35ff:fee3:6035/64 Scope:Link
[13:30:59] <jepler> the dedicated interface has a link-local ipv6 address, so what you did via the GUI is not enough
[13:31:02] <jepler> you need the sysctl.conf thing
[13:31:03] <skunkworks> looks like it doesnt
[13:31:28] <skunkworks> http://pastebin.com/Y501W2cL
[13:31:39] <jepler> you need net.ipv6.conf.eth4.disable_ipv6 = 1
[13:31:47] <skunkworks> in the gui - the ip6 tab is set to 'ignore'
[13:31:57] <jepler> it looks like the GUI is tricking you
[13:32:02] <skunkworks> darn
[13:32:14] <skunkworks> so - your directions should be used
[13:32:20] <jepler> for most purposes, it's not harmful to have an IPv6 link-local address
[13:33:14] <skunkworks> that is how I have been testing.. I don't think I have had an issue yet.. but I think to be safe I should disable it.
[13:33:59] <jepler> Yes
[13:35:18] <jepler> the main thing I know that will still happen with an IPv6 link-local address configured is called "DNS multicast": when trying to resolve a hostname like 'fnord.local' a packet will be sent on that interface to the ipv6 address ff02::fb.5353
[13:35:56] <jepler> 13:16:30.871191 IP6 fe80::76d4:35ff:fe10:a869.5353 > ff02::fb.5353: 0 PTR (QM)? _googlecast._tcp.local. (40)
[13:36:05] <jepler> and here's something that keeps popping up, not sure what it is
[13:37:05] <jepler> possibly it's my colleague's computer playing music from google
[13:38:54] <jepler> I'll ad this:
[13:38:55] <jepler> Note: > Simply setting 'ipv6' to 'ignore' in the GUI network tools does not eliminate the link-local ipv6 address. Use the sysctl.conf method even if you otherwise use the GUI to configure the dedicated interface.
[13:39:30] <skunkworks> heh
[13:39:38] <skunkworks> sounds good
[13:49:23] <KGB-linuxcnc> 03Jeff Epler 05master 1730c5a 06linuxcnc 10docs/man/man9/hm2_eth.9 hm2_eth: how to set up the ethernet interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1730c5a
[14:02:58] <skunkworks> jepler, that worked
http://pastebin.com/YyP57Zzj
[14:03:14] <skunkworks> (adding to the sysctl.conf)
[14:08:54] <skunkworks> that is awesome!
[14:24:12] <seb_kuzminsky>
[14:31:43] <jepler> skunkworks: good
[14:48:51] <jepler> now we need someone who's eager for the challenge to find any remaining ways to send packets while hm2_eth is running
[14:48:55] <jepler> I've run out of ways I can think of :)
[14:49:22] <jepler> you could remove the firewall rule or the pinned arp entry, but neither of those really counts
[15:04:51] <skunkworks> unplug it? ;)
[15:06:20] <jepler> also probably doesn't count
[15:35:23] <jepler> linuxcnc-build: force build 0000.checkin
[15:35:24] <linuxcnc-build> build #2276 forced
[15:35:25] <linuxcnc-build> I'll give a shout when the build finishes
[16:11:05] <seb_kuzminsky> jepler: it should use --disable-check-runtime-deps in rip builds now
[16:11:18] <seb_kuzminsky> i need to add the same thing to clang builds, and the docs build
[16:37:41] <linuxcnc-build> Hey! build 0000.checkin #2276 is complete: Success [3build successful]
[16:37:41] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2276
[16:38:06] <jepler> seb_kuzminsky: thanks, you're awesome
[16:39:46] <seb_kuzminsky> i rty
[18:29:59] <cradek> whoah, I see the latest hm2 push built, yay!!
[18:33:05] <seb_kuzminsky> that was the v0 branch, not master
[18:33:13] <seb_kuzminsky> so hold your yay for a bit...
[18:54:33] <seb_kuzminsky> linuxcnc-build: force build 0000.checkin
[18:54:34] <linuxcnc-build> build #2277 forced
[18:54:34] <linuxcnc-build> I'll give a shout when the build finishes
[18:56:42] <seb_kuzminsky> all the builders that should use --disable-check-runtime-deps now use it, thanks jepler for adding it
[18:56:55] <seb_kuzminsky> linuxcnc-build: force build --branch=2.6 0000.checkin
[18:57:14] <linuxcnc-build> The build has been queued, I'll give a shout when it starts
[19:56:45] <linuxcnc-build> Hey! build 0000.checkin #2277 is complete: Success [3build successful]
[19:56:45] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2277
[19:56:48] <linuxcnc-build> build forced [ETA 1h02m10s]
[19:56:48] <linuxcnc-build> I'll give a shout when the build finishes
[20:59:29] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 485f9a8 06linuxcnc 10VERSION 10debian/changelog Update changelog & VERSION for 2.6.0 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=485f9a8
[20:59:29] <KGB-linuxcnc> 03Sebastian Kuzminsky 05signed tags 6b85a5a 06linuxcnc 03v2.6.0 LinuxCNC v2.6.0 (tagged commit: 485f9a8) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=6b85a5a
[20:59:57] <seb_kuzminsky> yeah that's right
[21:35:52] <linuxcnc-build> Hey! build 0000.checkin #2278 is complete: Success [3build successful]
[21:35:52] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2278
[21:37:08] <skunkworks_> logger[psha]:
[21:37:08] <logger[psha]> skunkworks_: Log stored at
http://psha.org.ru/irc/%23linuxcnc-devel/2014-07-29.html
[22:17:38] <jepler> seb_kuzminsky: oh yeah, that's right
[22:18:58] <seb_kuzminsky> if the buildbot manages not to fall over for like 30 more minutes i'm gonna go smoke a cigarette
[22:19:28] <seb_kuzminsky> i've got all the wiki updates and the email all queued up, ready to go
[22:19:44] <seb_kuzminsky> i've got my asbestos underpants on
[22:19:48] <seb_kuzminsky> i'm ready to release!
[22:21:57] <skunkworks_> asbestos? you need to move to kevlar...
[22:22:58] <seb_kuzminsky> heh
[22:23:02] <seb_kuzminsky> nomex maybe
[22:24:22] <skunkworks_> Am I hearing a mumble release?
[22:26:06] <seb_kuzminsky> yep
[22:30:23] <seb_kuzminsky> so i've been trying to follow this release checklist:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ReleaseCheckList
[22:30:33] <seb_kuzminsky> who can update the www.linuxcnc.org front page? not i
[22:30:39] <seb_kuzminsky> and the irc channel topic
[22:31:04] <seb_kuzminsky> do we still care about putting, what, tarballs? on sourceforge? (i dont)
[22:34:44] <jepler> seb_kuzminsky: I don't think we did that for 2.5 at all
[22:35:22] <jepler> I think I can change the channel topics if you want me to .. but you've got about 30 seconds to say "yes"; I'm off to bed.
[22:37:48] <jepler> seb_kuzminsky: actually, you should now be able to use chanserv to set the topic of #linuxcnc and #linuxcnc-devel
[22:38:47] <seb_kuzminsky> thanks jeff
[22:38:49] <jepler> something like: /msg chanserv topic #linuxcnc <seb_kuzminsky> i've got my asbestos underpants on
[22:38:57] <seb_kuzminsky> uhm ok
[22:40:09] ChanServ changed topic of
#linuxcnc-devel to:
http://linuxcnc.org | 2.6.0 extruding right now! Stand by!
[22:41:46] <jepler> 'night
[22:41:51] <jepler> heh
[22:44:19] <seb_kuzminsky> goodnight! :-)
[23:01:51] <seb_kuzminsky> http://buildbot.linuxcnc.org/buildbot/builders/3001.dsc-lucid/builds/1810/steps/setproperty_2/logs/property%20changes
[23:19:08] <skunkworks_> Yay! great work!
[23:49:39] <seb_kuzminsky> wow, it worked, i can't believe it