Back
[00:01:54] <KGB-linuxcnc> 05zultron-ubc3-dev a65b050 06linuxcnc 04. branch deleted * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a65b050
[00:02:55] <KGB-linuxcnc> 03John Morris 05zultron/ubc3-dev 8e43b12 06linuxcnc New branch with 27 commits pushed, 10110 files changed, 0317983(+), 049374(-) since unified-build-candidate-3/e3de5bb
[01:14:54] <linuxcnc-build> build #32 of deb-precise-rtpreempt-binary-x86 is complete: Failure [4failed apt-get-update shell_2] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rtpreempt-binary-x86/builds/32 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:15:45] <linuxcnc-build> build #32 of deb-precise-rtpreempt-binary-amd64 is complete: Failure [4failed apt-get-update shell_2] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rtpreempt-binary-amd64/builds/32 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:47:36] <linuxcnc-build> build #32 of deb-precise-xenomai-binary-amd64 is complete: Failure [4failed apt-get-update shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-xenomai-binary-amd64/builds/32 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:50:22] <linuxcnc-build> build #1330 of deb-lucid-sim-binary-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-lucid-sim-binary-i386/builds/1330 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:51:38] <linuxcnc-build> build #1336 of deb-precise-sim-binary-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-sim-binary-i386/builds/1336 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:52:21] <linuxcnc-build> build #1335 of deb-precise-sim-binary-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-sim-binary-amd64/builds/1335 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:53:52] <linuxcnc-build> build #165 of deb-precise-rt-binary-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rt-binary-i386/builds/165 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[01:57:11] <zultron> The .deb build failures are from a couple of new files I'm installing, but didn't add to the debian packaging. (It's on my list.)
[01:57:16] <zultron> See
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=commit;h=c4e05d88c7a2c9e4e7fcc6e70967ed0ff7362662
[01:58:41] <zultron> seb_kuzminsky, this is meant to address the issue we were discussing about not installing system files during RIP 'make setuid'.
[02:04:39] <linuxcnc-build> build #34 of deb-precise-xenomai-binary-x86 is complete: Failure [4failed apt-get-update shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-xenomai-binary-x86/builds/34 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[02:11:36] <linuxcnc-build> build #1330 of deb-lucid-sim-binary-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-lucid-sim-binary-amd64/builds/1330 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[02:12:30] <linuxcnc-build> build #1331 of deb-lucid-rt-binary-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-lucid-rt-binary-i386/builds/1331 blamelist: John Morris <john@zultron.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>
[08:09:25] <memleak> after a lot of kernel hacking i got preempt_rt latency down to 20us on gentoo 64-bit off to bed now, night all
[08:10:09] <memleak> btw sustained for about 30 mins under heavy load
[08:59:59] <CaptHindsight> I'll keep that Asrock E350M1 up as a test system for RTAI, Xenomai and Preempt_RT with Ubuntu and Debian
[09:02:02] <CaptHindsight> seb_kuzminsky: RTAI <10Us, preempt_rt 20uS (tweaked kernel) so far on the Asrock E350M1 with EFI
[09:08:09] <seb_kuzminsky> CaptHindsight: wow, those rt-preempt numbers are much better than i've heard elsewhere - memleak knows his stuff :-)
[09:08:24] <seb_kuzminsky> zultron: awesome, thanks for working on that issue
[09:14:05] <CaptHindsight> seb_kuzminsky: it will be interesting to see what makes the most impact in the configs for preempt-_rt kernels
[09:15:45] <CaptHindsight> I'm guessing that with RTAI tweaked for the same board it will be ~4-5uS max jitter
[09:17:20] <CaptHindsight> that is what we have seen on AMD hardware from the past few years
[09:18:11] <CaptHindsight> A, E, FX and Phenom-II
[11:56:29] <seb_kuzminsky> just added a wheezy distribution to our deb archive, it just has hm2 firmware for now
[12:04:43] <cradek> this is good
[12:04:49] <cradek> I would be happy to stop using ubuntu
[12:21:09] <seb_kuzminsky> someone reported on the list that the precise rtai kernel runs fine on wheezy
[12:21:24] <seb_kuzminsky> debian ships an rt-preempt kernel for wheezy
[12:21:37] <seb_kuzminsky> and zultron's kernel builder can make xenomai kernels for wheezy
[12:21:46] <seb_kuzminsky> so i think we're in good shape to support wheezy
[12:32:50] <skunkworks> wow
[12:33:00] <skunkworks> and linuxcnc explodes!
[12:33:48] <seb_kuzminsky> i hope not ;-)
[13:01:14] <jepler> Where's the kaboom? There was supposed to be an earth-shattering kaboom!
[13:02:27] * skunkworks heard it...
[13:02:28] <ju-emb> is there someone from Mesa Electronics here?
[13:04:18] <PCW> http://www.youtube.com/watch?v=HnyB0a8G71Y
[14:20:07] <alex_joni> PCW: lol
[17:11:03] <memleak> i dont have hardware accel 3d working so when doing 3d intensive graphics using llvmpipe, latency shoots up to about 60us with CPU usage around 70%
[17:11:24] <memleak> otherwise usually under 20 or 30us
[17:11:38] <memleak> i have another AMD board that will have 3d hardware accel so that will be a real test
[17:15:36] <memleak> pastebin.com/frxFZeii kernel size 1.5MB i tried optimizing a few more things but i couldn't get it to boot without forcing rw on the kernel command line
[17:16:51] <memleak> if i wanted to get really fancy i'd use the BFQ I/O scheduler
[17:19:22] <PCW> I wonder if theres any chance the preemt_rt kernel do better at RT Ethernet than what I have now
[17:19:37] <PCW> would do
[17:21:32] <memleak> there is always more room for improvement when it comes to ricing your kernel
[17:22:21] <memleak> compile kernel with -fomit-frame-pointer -Os -funroll-loops -g0 -s and LDFLAGS to --strip-all etc etc :P
[17:22:51] <memleak> -march=native of course
[17:23:19] <memleak> wow i really sound like a gentoo user now!
[17:24:28] <KGB-linuxcnc> 03Michael Geszkiewicz 05master 7c2d975 06linuxcnc 10src/hal/drivers/mesa-hostmot2/hm2_pci.c hm2: fix typo in fpga chip name preventing bitfile loading for 4i69 boards * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7c2d975
[17:26:02] <PCW> the Ethernet WD bug is most easily seen in 7I80HD (in my experience)
[17:26:04] <PCW> (may have to do with amount of I/O or something)
[17:26:27] <PCW> the Ethernet WD bug is most easily seen in 7I80HD (in my experience)
[17:26:29] <PCW> (may have to do with amount of I/O or something)
[17:27:07] <PCW> eventually I will paste that in the right window
[17:28:01] <memleak> heh!
[17:28:19] <memleak> i thought you were just hitting the arrow up key and pressing enter
[17:28:38] <memleak> they make it too easy to spam in IRC :/
[17:31:12] <skunkworks> I can't wait to test! :)
[17:34:40] <skunkworks> \WD?
[17:36:36] <skunkworks> \\\\\\\pp[p[]\\\=-=[[]'
[17:36:38] <skunkworks> ]
[17:37:05] <skunkworks> ],o99[-[-[pp0;p[[[[[[[[[[[[[''\]]]]\[[]'/
[17:37:11] <skunkworks> '
[17:37:16] <skunkworks> ]\\\\
[17:37:17] <skunkworks> \
[17:37:25] <skunkworks> \
[17:37:26] <skunkworks> ?/
[17:37:32] <skunkworks> ?/
[17:37:40] <skunkworks> [p[p-i\
[17:43:09] <seb_kuzminsky> somebody reboot skunkworks, he crashed again
[17:45:28] <skunkworks> heh - sorry. phone - child - only 2 hands
[18:13:28] <brianmorel99> Is the ub3 branch from git currently parallel build safe? I saw a bug on SF about the docs, but I didn't know if the rest was safe.
[19:01:21] <jepler> I assumed it was befunge or one of those other novelty languages
[20:15:28] <micges> seb_kuzminsky: around?
[20:16:25] <seb_kuzminsky> brianmorel99: yes, we think so
[20:16:31] <seb_kuzminsky> micges: hey!
[20:17:40] <micges> need little advice, I've fixed some bugs in ubc3-7i80 branch (commits will be in an hour)
[20:18:16] <brianmorel99> ok, I'll give it a test. I'm attempting to build the debian packages of ub3 now. Not a big deal, but it builds for all of the kernels it can find even if you specify a kernel with debian/configure
[20:18:24] <micges> I don't want to merge ubc3 into it, what I must do to 'rebase' it on top of ubc3 ?
[20:18:44] <seb_kuzminsky> brianmorel99: the debian packages in ubc are totally broken
[20:18:44] <micges> (you were doing sth like that I think)
[20:18:55] <seb_kuzminsky> i'm about to push a bunch of commits to ubc that fixes it
[20:19:23] <seb_kuzminsky> i suggest you either wait a few hours for me to push it, or use the seb/ubc3-deb branch
[20:19:29] <seb_kuzminsky> micges: yes, use rebase
[20:20:03] <brianmorel99> no big deal, I'm just doing it to learn what happens more or less.
[20:20:12] <seb_kuzminsky> micges: i assume you have a local branch named ubc3-7i80, based on some random commit in ubc, and you've fetched from git.linuxcnc.org so origin/unified-build-candidate3 has moved ahead
[20:20:25] <seb_kuzminsky> hold on a sec
[20:20:44] <micges> yes exactly
[20:23:07] <skunkworks> micges: yay!
[20:27:08] <skunkworks> micges: what ended up being the problem?
[20:31:05] <micges> skunkworks: <micges> wd read simply was reading data from last request data function
[20:31:05] <micges> <PCW> because the new data wasn't there yet and the read just "fell through"?
[20:34:42] <skunkworks> neat!
[20:35:39] <skunkworks> Thanks for working on this. If you guys figure out how to push it - let me know and I will test it
[20:36:43] <micges> sure
[20:40:01] <seb_kuzminsky> micges: do you want a hand with the rebase or do you know what to do?
[20:41:00] <micges> need help
[20:41:18] <seb_kuzminsky> ok
[20:41:40] <seb_kuzminsky> first thing i'd recommend is to tag your current branch head so you can get back to it easily if things go wrong
[20:41:54] <seb_kuzminsky> git tag good-safe-place ubc3-7i80
[20:42:54] <seb_kuzminsky> then try to rebase onto the tip of ubc:
[20:43:02] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb fad40b5 06linuxcnc 10(16 files) deb: new debian/configure and debian/control * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fad40b5
[20:43:02] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb 505746e 06linuxcnc 10debian/configure 10debian/rules.in deb: fix the debian/{control/rules} remaking rules * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=505746e
[20:43:02] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb 2dec121 06linuxcnc 10debian/configure deb/conf: accept -a to mean -r * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2dec121
[20:43:03] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb c03b79b 06linuxcnc 10debian/control.in deb/control: get rid of ancient Provides in control * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c03b79b
[20:43:07] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb 57db66b 06linuxcnc 10debian/control.posix.in 10debian/control.rtai.in 10debian/control.rtpreempt.in deb/control: relax the Conflicts * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=57db66b
[20:43:11] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb 7a1c034 06linuxcnc 10debian/rules.in deb/rules: dont use cpio when cp will do * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7a1c034
[20:43:16] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb de1c054 06linuxcnc 10debian/linuxcnc.files.in 10src/Makefile install rsyslogd.conf file * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=de1c054
[20:43:20] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb 0dc9a7d 06linuxcnc 10src/configure.in 10src/rtapi/ulapi_autoload.c give dlopen the path to the ulapi library * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=0dc9a7d
[20:43:23] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/ubc3-deb 673b7ae 06linuxcnc 10src/Makefile 10src/rtapi/Submakefile put ulapi-$flavor.so straight into rtlib/, not lib, so the dlopen can look in EMC2_RTLIB_DIR * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=673b7ae
[20:43:43] <seb_kuzminsky> git rebase origin/unified-build-candidate-3
[20:43:55] <seb_kuzminsky> give it a try
[20:46:35] <seb_kuzminsky> that rebase command says "take all the commits in the current branch that are not in origin/ubc3, and apply them to the tip of ubc3"
[20:46:46] <seb_kuzminsky> back in a minute
[20:47:34] <micges> seb_kuzminsky: thanks, testing
[20:57:22] <micges> seb_kuzminsky: it works, thanks!
[20:57:51] <micges> seb_kuzminsky: sorry to bother, I was thinking it was harder
[20:58:49] <seb_kuzminsky> oh good, glad it worked :-)
[20:59:13] <seb_kuzminsky> there are some tricky things that can happen when you rebase, if you run in to them feel free to ping me any time
[20:59:41] <seb_kuzminsky> if you push that branch now, it'll complain that it's not a fast-forward, so you'll have to (very carefully!) use the --force flag to push
[21:02:58] <skunkworks> logger[mah]:
[21:02:58] <logger[mah]> skunkworks: Log stored at
http://linuxcnc.mah.priv.at/irc/%23linuxcnc-devel/2014-01-29.html
[21:04:36] <micges> seb_kuzminsky: yes it's complaining, push with force working atm
[21:06:13] <KGB-linuxcnc> 03Michael Geszkiewicz 05ubc3-7i80 8d12d0a 06linuxcnc 10(6 files in 2 dirs) Add support for mesanet ethernet UDP boards 7i80 and 7i76E * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=8d12d0a
[21:06:13] <KGB-linuxcnc> 03Michael Geszkiewicz 05ubc3-7i80 f1211f5 06linuxcnc 10src/hal/drivers/mesa-hostmot2/hm2_eth.c hm2_eth: add more data to debug output * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f1211f5
[21:06:13] <KGB-linuxcnc> 03Michael Geszkiewicz 05ubc3-7i80 de9f662 06linuxcnc 10src/hal/drivers/mesa-hostmot2/hm2_eth.c hm2_eth: add retry with timeout to enqueue_read() to make sure that all requested data will be readed * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=de9f662
[21:07:24] <micges> nice, thanks again
[21:18:05] <skunkworks> yay - I will test it tomorrow!
[21:46:46] <skunkworks> cradek: do you have a schematic for the servo drives?
[21:50:28] <cradek> nope
[21:50:34] <cradek> wish I did
[21:51:50] <skunkworks> the y axis errors.. something about a circuit breaker shut down..
[21:52:04] <skunkworks> but that drive looks to be the oldest..
[21:52:14] <skunkworks> dad might try to replace the caps
[21:52:30] <cradek> do they have fault lights?
[21:52:49] <skunkworks> dad says nothing comes on different on the drive
[21:52:56] <skunkworks> compared to the others.
[21:53:05] <skunkworks> but he will look harder
[21:53:33] <skunkworks> he got the axis running well - the tach looks like the comutator was roughly turned - so at higher feeds it sounded pretty bad
[21:54:37] <cradek> so it runs but faults sometimes?
[21:54:56] <linuxcnc-build> build #33 of deb-precise-rtpreempt-binary-x86 is complete: Failure [4failed apt-get-update shell_2] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rtpreempt-binary-x86/builds/33 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>
[21:55:10] <skunkworks> yes
[21:55:19] <linuxcnc-build> build #33 of deb-precise-rtpreempt-binary-amd64 is complete: Failure [4failed apt-get-update shell_2] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rtpreempt-binary-amd64/builds/33 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>
[21:55:20] <skunkworks> every couple minutes
[21:55:23] <skunkworks> or longer
[21:57:33] <skunkworks> it boots and he can jog it around.. have not figured out how to home it.. It seems like the internet says - flip the zero return switch then jog all axis +
[21:57:40] <skunkworks> have not tried that one yet..
[21:58:13] <cradek> yes I recall you poke each jog button to home
[21:58:33] <cradek> I've seen it about once
[22:06:00] <skunkworks> cradek: do you remember what your drive would do?
[22:06:47] <cradek> on one of them - it would be in fault mode at power on, and poking the reset button would enable it
[22:06:56] <cradek> I don't remember which fault
[22:07:04] <cradek> I think they have a row of fault LEDs but I'm not sure
[22:08:06] <skunkworks> http://imagebin.org/287800
[22:08:21] <cradek> yeah yeah
[22:08:35] <cradek> oh look at all those parts...
[22:08:47] <skunkworks> heh
[22:09:03] <cradek> I think I decided the problem was in one of those black mystery sandwich cookies
[22:09:35] <skunkworks> oh - that is the easy way out!
[22:10:05] <skunkworks> that is the one with the old caps - it is miss labled as x but the plug is labled y
[22:10:24] <skunkworks> labeled
[22:10:50] <skunkworks> scary..
[22:11:17] <skunkworks> have not found any crowbar marks on it though.. ;)
[22:23:55] <KGB-linuxcnc> 03Sebastian Kuzminsky 05unified-build-candidate-3 673b7ae 06linuxcnc fast forward * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=673b7ae
[22:24:36] <seb_kuzminsky> kgb expressed it in a strange way, but that's me pushing seb/ubc3-deb to unified-build-candidate-3
[22:24:50] <linuxcnc-build> build #1722 of lucid-rtai-i386-clang is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-rtai-i386-clang/builds/1722 blamelist: Francis Tisserant <tissf@free.fr>, Michael Haberler <mail17@mah.priv.at>, Sebastian Kuzminsky <seb@highlab.com>, Dewey Garrett <dgarrett@panix.com>, Andy Pugh
[22:24:50] <linuxcnc-build> <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jofey Jian <jofey@araisrobo.com>, Ben Jackson <ben@ben.com>, John Morris <john@zultron.com>, Michael Haberler <git@mah.priv.at>, Yishin Li <ysli@araisrobo.com>, Chris Radek <chris@timeguy.com>, Alex Joni <alex_joni@users.sourceforge.net>, Norbert
[22:24:51] <linuxcnc-build> Schechner <nieson@web.de>, Michael Geszkiewicz <micges@wp.pl>, Charles Steinkuehler <charles@steinkuehler.net>, dummy, Jeff Epler <jepler@unpythonic.net>, Chris S Morley <chrisinnanaimo@hotmail.com>, Bence Kovacs <bence.kovacs@generalmechatronics.com>, Jeff Epler <jepler@dsndata.com>, Russell Brown <russell@lls.lls.com>
[22:33:53] <linuxcnc-build> build #33 of deb-precise-xenomai-binary-amd64 is complete: Failure [4failed apt-get-update shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-xenomai-binary-amd64/builds/33 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>
[22:42:52] <skunkworksnook> 240 3phase
[22:45:44] <linuxcnc-build> build #805 of precise-amd64-xenomai-rip is complete: Failure [4failed apt-get-update compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-xenomai-rip/builds/805 blamelist: Francis Tisserant <tissf@free.fr>, Michael Haberler <mail17@mah.priv.at>, Sebastian Kuzminsky <seb@highlab.com>, Dewey Garrett
[22:45:44] <linuxcnc-build> <dgarrett@panix.com>, Andy Pugh <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jofey Jian <jofey@araisrobo.com>, Ben Jackson <ben@ben.com>, John Morris <john@zultron.com>, Michael Haberler <git@mah.priv.at>, Yishin Li <ysli@araisrobo.com>, Chris Radek <chris@timeguy.com>, Alex Joni
[22:45:44] <linuxcnc-build> <alex_joni@users.sourceforge.net>, Norbert Schechner <nieson@web.de>, Michael Geszkiewicz <micges@wp.pl>, Charles Steinkuehler <charles@steinkuehler.net>, dummy, Jeff Epler <jepler@unpythonic.net>, Chris S Morley <chrisinnanaimo@hotmail.com>, Bence Kovacs <bence.kovacs@generalmechatronics.com>, Jeff Epler <jepler@dsndata.com>, Russell Brown
[22:45:44] <linuxcnc-build> <russell@lls.lls.com>
[22:52:31] <linuxcnc-build> build #926 of precise-i386-realtime-rip is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/926 blamelist: Francis Tisserant <tissf@free.fr>, Michael Haberler <mail17@mah.priv.at>, Sebastian Kuzminsky <seb@highlab.com>, Dewey Garrett <dgarrett@panix.com>, Andy Pugh
[22:52:31] <linuxcnc-build> <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jofey Jian <jofey@araisrobo.com>, Ben Jackson <ben@ben.com>, John Morris <john@zultron.com>, Michael Haberler <git@mah.priv.at>, Yishin Li <ysli@araisrobo.com>, Chris Radek <chris@timeguy.com>, Alex Joni <alex_joni@users.sourceforge.net>, Norbert
[22:52:31] <linuxcnc-build> Schechner <nieson@web.de>, Michael Geszkiewicz <micges@wp.pl>, Charles Steinkuehler <charles@steinkuehler.net>, dummy, Jeff Epler <jepler@unpythonic.net>, Chris S Morley <chrisinnanaimo@hotmail.com>, Bence Kovacs <bence.kovacs@generalmechatronics.com>, Jeff Epler <jepler@dsndata.com>, Russell Brown <russell@lls.lls.com>
[23:02:58] <linuxcnc-build> build #1333 of deb-lucid-rt-binary-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-lucid-rt-binary-i386/builds/1333 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>
[23:07:14] <linuxcnc-build> build #831 of precise-x86-xenomai-rip is complete: Failure [4failed apt-get-update compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-x86-xenomai-rip/builds/831 blamelist: Francis Tisserant <tissf@free.fr>, Michael Haberler <mail17@mah.priv.at>, Sebastian Kuzminsky <seb@highlab.com>, Dewey Garrett
[23:07:15] <linuxcnc-build> <dgarrett@panix.com>, Andy Pugh <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jofey Jian <jofey@araisrobo.com>, Ben Jackson <ben@ben.com>, John Morris <john@zultron.com>, Michael Haberler <git@mah.priv.at>, Yishin Li <ysli@araisrobo.com>, Chris Radek <chris@timeguy.com>, Alex Joni
[23:07:15] <linuxcnc-build> <alex_joni@users.sourceforge.net>, Norbert Schechner <nieson@web.de>, Michael Geszkiewicz <micges@wp.pl>, Charles Steinkuehler <charles@steinkuehler.net>, dummy, Jeff Epler <jepler@unpythonic.net>, Chris S Morley <chrisinnanaimo@hotmail.com>, Bence Kovacs <bence.kovacs@generalmechatronics.com>, Jeff Epler <jepler@dsndata.com>, Russell Brown
[23:07:15] <linuxcnc-build> <russell@lls.lls.com>
[23:10:30] <linuxcnc-build> build #1726 of lucid-i386-realtime-rip is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/1726 blamelist: Francis Tisserant <tissf@free.fr>, Michael Haberler <mail17@mah.priv.at>, Sebastian Kuzminsky <seb@highlab.com>, Dewey Garrett <dgarrett@panix.com>, Andy Pugh
[23:10:30] <linuxcnc-build> <andy@bodgesoc.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jofey Jian <jofey@araisrobo.com>, Ben Jackson <ben@ben.com>, John Morris <john@zultron.com>, Michael Haberler <git@mah.priv.at>, Yishin Li <ysli@araisrobo.com>, Chris Radek <chris@timeguy.com>, Alex Joni <alex_joni@users.sourceforge.net>, Norbert
[23:10:30] <linuxcnc-build> Schechner <nieson@web.de>, Michael Geszkiewicz <micges@wp.pl>, Charles Steinkuehler <charles@steinkuehler.net>, dummy, Jeff Epler <jepler@unpythonic.net>, Chris S Morley <chrisinnanaimo@hotmail.com>, Bence Kovacs <bence.kovacs@generalmechatronics.com>, Jeff Epler <jepler@dsndata.com>, Russell Brown <russell@lls.lls.com>
[23:36:35] <linuxcnc-build> build #1726 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/1726 blamelist: Francis Tisserant <tissf@free.fr>, Michael Haberler <mail17@mah.priv.at>, Sebastian Kuzminsky <seb@highlab.com>, Dewey Garrett <dgarrett@panix.com>, Andy Pugh <andy@bodgesoc.org>, Chris Morley
[23:36:36] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jofey Jian <jofey@araisrobo.com>, Ben Jackson <ben@ben.com>, John Morris <john@zultron.com>, Michael Haberler <git@mah.priv.at>, Yishin Li <ysli@araisrobo.com>, Chris Radek <chris@timeguy.com>, Alex Joni <alex_joni@users.sourceforge.net>, Norbert Schechner <nieson@web.de>, Michael
[23:36:36] <linuxcnc-build> Geszkiewicz <micges@wp.pl>, Charles Steinkuehler <charles@steinkuehler.net>, dummy, Jeff Epler <jepler@unpythonic.net>, Chris S Morley <chrisinnanaimo@hotmail.com>, Bence Kovacs <bence.kovacs@generalmechatronics.com>, Jeff Epler <jepler@dsndata.com>, Russell Brown <russell@lls.lls.com>