#flex-dev Logs

Feb 15 2025

12:18 AM lcnc-relay: <ccatlett1984@> @JT I think i'm at the point to do a PR for the 7c80/7c81 stuff. unless someone on here has a 7c81 and wants to see if any overrides need to be setup? @rdtsc which board do you have again?
12:24 AM lcnc-relay: <ccatlett1984@> here is my Draft PR
12:24 AM lcnc-relay: <ccatlett1984@> https://github.com/jethornton/mesact/pull/135
02:35 AM lcnc-relay: <grandixximo@> @irc_liberachat_tom_dev:jauriarts.org: I didn't know you could use @ and ^ in the gcode, what are those for? other axis?
04:57 AM JT-Cave: morning
05:06 AM Tom_L: morning
05:09 AM Tom_L: i posted the final code for ya
05:11 AM Tom_L: grandixximo, http://linuxcnc.org/docs/stable/html/gcode/overview.html#gcode:polar-coordinates
06:51 AM JT-Cave: just create a hal signal and connected it to two pins yay
07:33 AM JT-Cave: https://www.youtube.com/watch?v=zfYrbD-Lz0k
07:39 AM Tom_L: nice
07:53 AM JT-Cave: https://youtu.be/7JNW_tCmH0M
07:54 AM Tom_L: i got the ops code working without the 'first hole' part
07:56 AM Tom_L: is that mostly for touch screens?
08:05 AM JT-Cave: no, it's a replacement for the axis manual tool changer
08:05 AM JT-Cave: no hal entries are needed by the user just an ini entry
08:08 AM Tom_L: was that in the last push?
08:08 AM JT-Cave: no, still need to code the ini part
08:08 AM Tom_L: k
08:09 AM JT-Cave: and update the docs
08:09 AM Tom_L: you see the video of the ops?
08:09 AM JT-Cave: missed it
08:10 AM Tom_L: tom-itx.no-ip.biz:443/~webpage/cnc/JT-SHOP/flexgui/hole_pattern.mkv
08:10 AM Tom_L: that was the final code without the first hole part
08:11 AM Tom_L: http://tom-itx.no-ip.biz:443/~webpage/cnc/JT-SHOP/flexgui/hole_pattern.mkv
08:15 AM JT-Cave: looking good
08:15 AM Tom_L: i pasted the code ^^
08:16 AM Tom_L: one with the first hole and the final without
08:24 AM Tom_L: i think flex is by far the most versatile gui and just keeps getting better
08:34 AM JT-Cave: thanks
08:40 AM JT-Cave: Pushing to github.com:jethornton/flexgui.git
08:40 AM JT-Cave: To github.com:jethornton/flexgui.git
08:40 AM JT-Cave: ! [rejected] master -> master (fetch first)
08:40 AM JT-Cave: error: failed to push some refs to 'github.com:jethornton/flexgui.git'
08:40 AM JT-Cave: hint: Updates were rejected because the remote contains work that you do
08:40 AM JT-Cave: hint: not have locally. This is usually caused by another repository pushing
08:40 AM JT-Cave: hint: to the same ref. You may want to first integrate the remote changes
08:40 AM JT-Cave: hint: (e.g., 'git pull ...') before pushing again.
08:40 AM JT-Cave: hint: See the 'Note about fast-forwards' in 'git push --help' for details.
08:40 AM JT-Cave: WTF?
08:41 AM Tom_L: check your credentials?
08:42 AM Tom_L: last one i show is my deb but you didn't move it yet
08:43 AM Tom_L: it's likely the deb
08:44 AM Tom_L: since it's still showing up in the wrong place
08:45 AM Tom_L: i'm not sure what you do after pulling it but you do move it somewhere
08:45 AM JT-Cave: yeah somehow I moved the deb and didn't commit it somehow
08:46 AM Tom_L: too early for that kind of nonsense
08:47 AM JT-Cave: all right I'm good now and manual tool change has been pushed
08:47 AM Tom_L: ok i'll build here in a sec
08:48 AM Tom_L: i may put the op changes in the example later today
08:50 AM Tom_L: PR #265
09:09 AM * JT-Shop gets some fires going
09:25 AM JT-Cave: version 1.1.2 now :)
09:26 AM Tom_L: ok i'll build another if you want
09:26 AM Tom_L: just got back from the bank
09:36 AM JT-Cave: yup
09:40 AM Tom_L: when i get back from shopping i'll build
09:48 AM Tom_L: PR #266
09:48 AM Tom_L: later..
01:02 PM Tom_L: PR #267 subs & deb
02:58 PM JT-Cave: got it thanks
05:13 PM JT-Shop: getting that manual tool change sorted out was a huge milestone
06:01 PM Tom_L: i bet
06:01 PM Tom_L: good night for chicken noodle soup
06:02 PM Tom_L: i fought that code for quite nearly having it right several times then it finally fell together
06:02 PM Tom_L: quite a while*